This was more useful than Rolock's entire website and KZitem page.
@KarlWerner
24 күн бұрын
@13:15 it looked like it took alot of force to twist them on. Are they easy to get on/off?
@johnmiskin4905
6 ай бұрын
Yes much clearer, so much info missing compared to there site, great job. I had a tough time just separating the 2 section when they arrived is it like this when connecting the gloves!! Which would be totally useless to me. They looked so easy to dof and don in there video. I wont bother to install them if its that hard, any solutions to this?
@mikepearson1816
2 жыл бұрын
Great instructional video ! ...what is the number of the SHOWA gloves ?
@DrySuitProjects
2 жыл бұрын
PVC 660 or 720
@leonenjenny
9 ай бұрын
For 22 minute’s waiting for you to click the gloves on , how to twist them on Butt nice video 👌
@Paranioa1963
2 жыл бұрын
Is there an adapter for SI Tech quick cuff, suit rings are of different size
@DrySuitProjects
2 жыл бұрын
No as far as I know
@clintcoraskiscubadiving
2 жыл бұрын
I just got the Rolock 90 and followed your excellent video to put it together. I'm finding the gloves part a bit tough to don and doff onto the sleave part even with silicone grease on both parts. Does this get easier over time since it's new because at the moment, I would need another person to help me get them on and off.
@DrySuitProjects
2 жыл бұрын
I’ve found that without properly greasing the o-ring it’s super tough. Not much grease required though. For me it was fairly easy even without any help single handedly. May be my o-ring got compressed over time. One thing for sure: no grease - closing is very hard
@clintcoraskiscubadiving
2 жыл бұрын
@@DrySuitProjects Thanks for your reply. I'm not sure which o-ring this is because the only one that was installed even in your video was the one that went on the blue ring inside the glove. I'm finding it super tough to turn the entire glove section to lock into the sleeve section (turning to align the dots to closed position and back to the open position). I know the short video on the Rolock website has the demo where the guy just twists his hand while holding onto the sleeve ring - there's no way I can do that at least right now.
@DrySuitProjects
2 жыл бұрын
Look at ring on the sleeve. It has o-ring on the butt-end. It provides the sealing when you putting on the glove. Put a very thin layer of the silicone grease provided. Don’t put to much or it will collect the debris
@jakubsimanek5959
5 жыл бұрын
Well done. Are the PU rings on the sleeves same as on anthares or si-tech oval system or it is a different diameter?
@DrySuitProjects
5 жыл бұрын
Yes, they are the same. Thats the beauty of it
@ThegearlockerNet
5 жыл бұрын
Good video, but a little tight on the camera angle
@DrySuitProjects
5 жыл бұрын
Thanks!
@ernestpreciado374
4 жыл бұрын
Is there a place in the US to get these?
@divezonescuba4254
4 жыл бұрын
Www.divegearexpress.com. You can also look at the dive zone scuba channel to see how to mount these directly to the suit so that the seals are better protected.
@ernestpreciado374
4 жыл бұрын
@@divezonescuba4254 they carry the original but not the 90's
@rahuls5881
3 жыл бұрын
drop the loud music else fine. speak talk to the audience 0 crap music taste isnt for all :D
@dmeyer6994
2 жыл бұрын
Do you not have a voice? Why ruin a good video with crap music... Just talk
@DrySuitProjects
2 жыл бұрын
Video production is not my stronger side, apparently
@dmeyer6994
2 жыл бұрын
@@DrySuitProjects The video is good. But it'd be much better if you just talked to us instead of having captions and music. Just a suggestion.
Пікірлер: 23