Thanks Chris. It's always nice to see your reviews! Pens are so irresistible! I have too many and too many inked up but I LOVE them all. Take care
@chrisrap52
Жыл бұрын
You and me both!
@JamesWilliam70
6 ай бұрын
Yep, the Asvine EF is wetter and smoother making it not as fine, but i think i prefer it for faster stokes. Thanks for sharing.
@chrisrap52
6 ай бұрын
Thanks for watching!
@paulmchugh1430
Жыл бұрын
I have the P36. I would strongly recommend not to pull the piston and take the shaft off the knob. You risk not being able to completely seal or sit the knob onto the barrel. It took me over an hour to put the blind cap in it's correct position. If you remove the piston, leave it together. Other than that, this is a very nice pen with a comfortable weight. Great review, Chris. ps. The Cypress pen looks phenomenal. I have to investigate it further and looking forward to your review.
@cmoorhead1
9 ай бұрын
Paul please share your piston cap reassembly tips!! I am at a loss getting the cap to thread all the way down to the body and not wiggle after reassembly.
@paulmchugh1430
9 ай бұрын
@@cmoorhead1 the piston wiggles no matter is you adjust the piston or not. There is another problem. When you get the piston to fully retract, the knob, when attached to the barrel, has to extend the piston slightly to seal completely. If you have attempted to adjust the piston, it will wiggle outside of the barrel, but will not once it is inserted in the barrel. You just have to keep repositioning the piston screw into the key that is attached to the knob until you can get the piston to retract completely. It takes patience. I contacted Sally at Asvine and that was all the advice I got - patience and trial and error. Just remember that the piston will extend slightly when you attach the knob completely onto the barrel.
@davecharvella4854
Жыл бұрын
Had to check ... couldn't remember if I had the new or old version. It's the old with a (F) Bock nib. I currently have it in my rotation inked with Waterman "Tender Purple". I like everything about this pen. It never ceases to amaze me how several of my less to least expensive pens feel and perform better than my most expensive. This pen is no exception! Cheers!
@jamieloom22
11 ай бұрын
Thanks for the detailed review. I had never heard of Asvine before but just ordered it because I love the clean design.
@chrisrap52
11 ай бұрын
Glad I could help!
@dancinswords
Жыл бұрын
I'm glad you're buying pens and, more importantly, making videos
@chrisrap52
Жыл бұрын
Me too!
@somnathsikdar6657
Жыл бұрын
Thanks for the review! One interesting pen is the Jinhao 9019. It has an extra large converter that screws in the section. I ordered one and am waiting for it to arrive.
@omeryehezkely3096
Жыл бұрын
And the wing sung 630 is also interesting...
@davidanderson3425
Жыл бұрын
Great looking pen, Chris. I have to say the standard Asvine nib would be my choice even if it is more F than EF.
@chrisrap52
Жыл бұрын
Agreed.
@philnaunton7181
Жыл бұрын
Thanks for the double review. Nicely done. I will pass on ordering one of these, although it is quite tempting. Good value, nice style, but I will wait.
@chrisrap52
Жыл бұрын
Glad to help
@archivist17
Жыл бұрын
I really like the style of this pen. Thanks for an interesting comparison review.
@chrisrap52
Жыл бұрын
Glad you like it!
@TheDarivan
Жыл бұрын
Great review thanks. Nice design and I must to say I'll take this video for my end of the year wish list. 😁
@chrisrap52
Жыл бұрын
😊👍✍
@samyg123
Жыл бұрын
That Majohn V1 looks very interesting! I'm just not sure about the cap. It appears to seal off at the bottom of the pen, which might mean ink can get all over the barrel.
@MateuMatheu
Жыл бұрын
And a freeway of air that must dry the nib, I suppose.
@samyg123
Жыл бұрын
@@MateuMatheu by the pictures it looks like it seals down at the base, which could be sufficient. But I’m more worried about ink leaking all over the pen body.
@nicco.2a
Жыл бұрын
Hello, thanks for this interesting review, seems to be a nice pen! I have a V126 and a p20, fine nibs that I really like. I am curious, is it possible to unscrew the finial in order to turn the clip so it is aligned with the nib?
@kattz753
Жыл бұрын
Is it the Qin Dynasty one? I love that D5 but didn't want to spend that much until I saw a review. Then again, I do also love those obnoxious Jinhao dragon pens so....I ordered the Jinhao 9019. There is only 1 Chinese video on KZitem so far. It has a HUGE converter and also a #8 nib. Add a lock, it becomes The Club.
@greyareaRK1
Жыл бұрын
Yikes, looks like I got the older version. VERY reliable and comfortable. The Bock M nib is so smooth and fast it's a little hard to control.
@Calcprof
Жыл бұрын
Pen style clearly intends to look like the classic Conid pen, which, however, has a different filling mechanism (bulk filler).
@chrisrap52
Жыл бұрын
Only so many variations. Conid is not unique in their designs. This pen stands out on its own.
@Calcprof
Жыл бұрын
@@chrisrap52 True. Not a direct coy, but a clear influence.
@MrCabimero
6 ай бұрын
Chris so can I swap a bock nib and feed unit completely by just unscrewing it?
@MrCabimero
6 ай бұрын
Sorry I just heard you say you pull it out. Thanks.
@RyC2004
2 ай бұрын
So I can buy an Asvine nib and then later change it to Bock nib and feed if I want?
@chrisrap52
2 ай бұрын
Maybe, try Asvine feed with Bock nib first.
@RyC2004
2 ай бұрын
@@chrisrap52 thank you for your advice
@ryansullivan3081
Жыл бұрын
I really like the old one, but the cap would almost get stuck and I’d really have to torque it off. I wonder if the new cap ring location fixes that.
@chrisrap52
Жыл бұрын
No, for me this is not a pen I would post. Some pens just are not good posters.
@ryansullivan3081
Жыл бұрын
@@chrisrap52 I meant on the threads when closed. I don’t post my pens either.
@chrisrap52
Жыл бұрын
I generally torque down my caps so requiring an effort to uncap is OK for me. I'd rather have a cap that doesn't unscrew easily. I have a few that seem to unscrew by themselves.
@pedre_
Жыл бұрын
Is it possible to replace the asvine nib with a Jowo one without further modifications? Is the bock nib unit the regular one? Thanks for the review!
@chrisrap52
Жыл бұрын
You can replace Bock nib with a Jowo, nib assembly is different. Regular nib is an Asvine nib which I prefer, smoother & wetter.
@omeryehezkely3096
Жыл бұрын
The most annoying design decision they made was to glue the nib collar.
@daburger3912
Жыл бұрын
Its not glued in. Just try a bit harder
@starparticles6250
6 күн бұрын
@@daburger3912you can unscrew the nib unit?
@user-qm8te1gq3j
Жыл бұрын
笔尖真的好像,只是logo不一样😅
@chrisrap52
Жыл бұрын
笔尖看起来很相似,但书写方式不同
@frankvars7925
Жыл бұрын
Hi Chris! I found your review very interesting and cause for reflection. Remarkable! Considering that the Bock nib should be of German production, that EF stroke compared to the stroke of the squares on your paper, doesn't convince me at all. It is known that the Bock is a stiff nib but this should really make it closer to a western EF nib that doesn't exist. While in the Asvine nib the EF could pass, maybe...
@chrisrap52
Жыл бұрын
Good point!
@davecharvella4854
Жыл бұрын
BTW ... have you experienced any flow issues with this pen?
@chrisrap52
Жыл бұрын
No. I use them every day or 2.
@wesfoulds47
4 ай бұрын
Mine leaking
@chrisrap52
4 ай бұрын
Ink leaking out means air leaking in. Was ink always leaking out? Nib unit & section fully screwed in?
@atthemoney
Жыл бұрын
Are the nib collars removable?
@chrisrap52
Жыл бұрын
Nib assemble can be unscrewed, nib & feed are friction fit & can be pulled out.
@bendunbar8334
Жыл бұрын
Are the nib units interchangable?
@chrisrap52
Жыл бұрын
Nibs can be swapped, not feeds. Nib unit cannot be removed.
Пікірлер: 57