Amazing video, great information! You made it very clear and easy how to use it. Now I feel comfortable getting one.
@Technie87
Жыл бұрын
@airvelocitysport discovered that using "Seccolube" an HPA specific oil, and running a oil/water separator would help eliminate smell, AND prolong the life of the compressor because of oil piston blow-by. Its pricey, but a good idea if you want to optimally run any HPA compressor I personally also like to run a cotton/charcoal/cotton filter after the oil/water separator for max filtering
@BuerkAnthony
Жыл бұрын
Thanks for the video. Very informative and covered all the maintenance and fill procedures.
@drewmurray6480
2 жыл бұрын
Pretty sure it's 55c degrees celsius is the max heat ,if you put ice in the bucket it helps cool it a bit more
@Keze13
2 ай бұрын
I didnt look through the comments... someone probably already said it. Put the bottle your filling up into a bucket of ice. as you mentioned... the bottle was hot after filling, with higher pressure... but pressure normalizes when it cools off. Ice just keeps the bottle from getting overly hot, makes condensing easier because of lower temps, and allows you to fill easier and more efficiently. We use this technique with refrigerant recovery. Just hook up the tank set it in a tub (or bucket), and fill with ice. You may have to play with what pressure to stop the pump at, as the ice may cause the opposite effect.... You might pump in 3K, but when it warms up it may be at 3.25K... but you should be able to fill tanks slightly faster with this method. Im probably 3 years late though... and someone probably already led you to this path. Lol.
@alancummings7107
Жыл бұрын
I paid £150 for my one for filling airguns , had it 3-4 years now , worth every penny great little compressors just change oil regularly.
@PeakyBlinder
Жыл бұрын
Worth every penny
@doitall1201
2 жыл бұрын
It’s a must
@Fernando_Woolybooger
Жыл бұрын
You can't beat these for the price if you are just getting into Airsoft for PCP airguns. I've since upgraded but I will always keep a Yong Heng around as my spare.
@juanpablo6787
2 жыл бұрын
Would love an update video, I didn’t even know these were a thing! Game changer for sure, where did you get it?
@OrdoAirsoft
2 жыл бұрын
Yes, it definately pays for itself in the long run! We got ours on amazon
@themagicmatt
5 ай бұрын
How long roughly would it take to fill a 48ci to 3000psi?
@rodrigoelgu
Жыл бұрын
I see you don have a filter to collect the moisture in the compressed air. have you had problems with your guns from corrosion from the moisture. UPDATE never mind i see the filter now.
@secretbro3681
2 жыл бұрын
will this ever run out?
@OrdoAirsoft
2 жыл бұрын
Confused as to what your question is? It just compresses outside air and fills the tank up.
@moetown909s3
6 ай бұрын
Where you order it from
@javascriptkiddie2718
2 жыл бұрын
Man this is getting expensive. I'm already up to $600 on the launcher itself with upgrades, now another $200 for this
@OrdoAirsoft
2 жыл бұрын
This will pay for itself though!!
@bombassbeefjerky9708
Жыл бұрын
Novarossi did you race off-road on road or drag race??? Maybe heli???
@OrdoAirsoft
Жыл бұрын
Off road truggy
@reedsilvesan2197
Жыл бұрын
Order some RED LINE oil, tha absolute best oil available.
@TELOVR
2 жыл бұрын
Will this compressor fill a 90 cubic inch 4500 psi carbon fibre tank? Love the video btw!
@OrdoAirsoft
2 жыл бұрын
Yes it will fill a 90 cubic inch tank, it will just take a bit longer. Just watch the temperature of the compressor to make sure it doesn't overheat.
@TELOVR
2 жыл бұрын
Ok, thanks for the information!
@colinsunday9149
Жыл бұрын
Can I use my air compressor at home to fill these ..I have a 120 gallon
@OrdoAirsoft
Жыл бұрын
That depends on the output pressure of your compressor. I have not found any consumer stores (home depot, lowes etc) that sell compressors that are capable of filling an HPA tank
@PETRAKOV1
Жыл бұрын
How is now after one year,still working whitout problems?
@OrdoAirsoft
Жыл бұрын
Still no issues just regular maintenance.
@m4rtas419
2 жыл бұрын
What is durability of this china?
@OrdoAirsoft
2 жыл бұрын
So far so good should be durable enough to pay for itself before breaking. Have not had any issues yet.
@daimo1115
9 ай бұрын
still working?
@PeakyBlinder
Жыл бұрын
What model is it, I need that
@OrdoAirsoft
Жыл бұрын
They propably have an updated version of this now. Look on ebay thats where we ordered this from.
@joeyuleman7076
Жыл бұрын
How long does it take to completely fill an empty tank?
@OrdoAirsoft
Жыл бұрын
About 5 minutes of running the compressor.
@imaboss1998
2 жыл бұрын
How long does a 3500 psi tank last or how many bbs
@OrdoAirsoft
2 жыл бұрын
All depends on how much psi you are running and what system you have. For us about 2 days of gameplay.
@CalebRitz
2 жыл бұрын
Can't you just use a air compresser from like home depo?
@OrdoAirsoft
2 жыл бұрын
No, these tanks can go up to 4500psi, normal shop air compressors usually run 150psi.
@HORSEDICKoMPEG
Жыл бұрын
So, After a year, It still going well?
@OrdoAirsoft
Жыл бұрын
Yes everything is still working properly so far!
@Lucky7Graphix
2 жыл бұрын
Can you put an inline air filter or like a separator on it where the fill line whip comes out?
@OrdoAirsoft
2 жыл бұрын
It has a built in filter at the end of the fill whip that is replaceable, but if you wanted to add another one I am sure you could modify it.
@russellkiefer8976
2 жыл бұрын
@@OrdoAirsoft I wouldn't recommend it unless the fittings are all HPA rated. Most pipe fittings and filters would be for normal
@yannickjanssen2375
Жыл бұрын
I came across a video of someone reviewing this compressoe stating that there was some minor oil build up in the tank. Is it safe to use because I've also hesrd that oil in a hpa tank is essentially a bomb that can combust on fill ups spontaneuously?
@OrdoAirsoft
Жыл бұрын
You must keep up on the maintenance with this compressor. Inspect the fill whip filter after every fill up. Also, make sure the oil level in the compressor is proper.
@DomDiCiacco
Жыл бұрын
Where can I buy
@OrdoAirsoft
Жыл бұрын
We bought ours on Ebay.
@Scoobydcs
Жыл бұрын
will 1 tank last all day?
@OrdoAirsoft
Жыл бұрын
Depends on many factors, but unless your running an LMG chances are 1 tank will last the day, at least these 68 cubic inch ones will.
@travismalseed5692
2 жыл бұрын
Have you filled any larger tanks? Would it fill a scuba tank?
@OrdoAirsoft
2 жыл бұрын
We have not tried any larger tanks yet, but we have heard of people filling scuba tanks with it - you will probably have to fill it in sections to allow the compressor to cool (ex: 4min intervals)
@russellkiefer8976
2 жыл бұрын
Do NOT use it for diving. This is not properly filtered for breathing.
@orangemike802
2 жыл бұрын
Where did you order this compressor? If we're in Canada..how would we order one at a fair price and reliable source?
@OrdoAirsoft
2 жыл бұрын
We ordered ours on amazon. You pretty much have to buy online since none of the big box stores are going to know about /carry something like this. There are other alternatives but this is the cheapest compressor for the money that we could find. Pays for itself in the long run
@orangemike802
2 жыл бұрын
@@OrdoAirsoft yeah.. I've been noticing some now with no oil, no water and compact and portable but highly concerned with their durability. Tuxing, GX... what do you think of those?
@OrdoAirsoft
2 жыл бұрын
As of now, we don't have any experience with those brands. Ours is a two-stage compressor so it gets very hot when operating and water is is must. I would research those other ones to make sure they are reliable
@dorinmihai2342
2 жыл бұрын
It's still reliable this HPA Fill Station?
@OrdoAirsoft
2 жыл бұрын
Yes, still works perfectly, and has paid for itself. We love it
@goddl1789
2 жыл бұрын
@@OrdoAirsoft What's the brand name and model? I just bought a HPA gun today, and wanting to get a fill station.
@Sauron191
2 жыл бұрын
I’m thinking of getting something like this .. I get my 88ci/4500psi tank filled at my local dive shop but when I pick it up it’s quite warm, once it cools down naturally the pressure drops … Does the water feed on these things stop the tank warming up and giving the maximum pressure at room temp?
@OrdoAirsoft
2 жыл бұрын
The tank will still be warm after filling but not as warm as getting it filled at a scuba shop. The water feed is to cool the cylinder head on the compressor, you are always going to have some pressure drop after filling once the tank cools to room temp.
@Sauron191
2 жыл бұрын
@@OrdoAirsoft Yes I understand that you’ll loose a bit but I mine was quite hot when I collected it and dropped to just above 3000psi once cooled down, so lost near on 1500psi give or take … The tank is 100% fine, nothing at all wrong with it. Can you allow them to cool and then top them up??
@OrdoAirsoft
2 жыл бұрын
You can allow them to cool and keep filling, the reason they get so hot is because they are filled very quickly with the method they are using. Also, you should not fill them up to the max psi rating maybe fill them to 4000 psi instead.
@albertwesker4266
2 жыл бұрын
You can put Your tank in water to cool itself during filling...thats what scuba shops do with bigger tanks...
@drewmurray6480
2 жыл бұрын
Hey bro i am still pretty new to hpa but got the topa hydraulic version it's exactly the same as the entry level Yong heng and just has a plain blue outside and my tank is a 4500 68ci aussie made gladiatair carbon fibre tank and i just fill 1500psi then wait 5 or ten minutes before going again so im not doing a hot fill but what i want your opinion on is the small canister tampon filters lol that they come with, should i invest in a bigger longer one they are only about 70aud or is the small standard one fine ,also though about running both of them together, just so i don't get any crap in my air tank but some guys are going to the trouble of desicant filters and double cylinder moisture removers .any help and information would be greatly appreciated
@Yodas_Stick
Жыл бұрын
I have this compressor and have used it for my paintball tanks, I’m now getting a Slp (super low pressure) tank for my airsoft pistol setup and I just wanted to make sure it can be used with this air compressor before I hook it up… but I don’t see why it wouldn’t work
@OrdoAirsoft
Жыл бұрын
Yeah it should work fine
@SAUCE206
2 жыл бұрын
Do you have to replace the filter after each fill? Or can you get multiple tanks out of one filter? Is so how many tanks per filter?
@OrdoAirsoft
2 жыл бұрын
We usually get 4-5 tanks per filter, it also comes with 3 spares when you buy it.
@aabsas4517
2 жыл бұрын
@@OrdoAirsoft can i get a link where to get the exact one? i'm scared if i bought the wrong one and afraid of getting my tank explode, i've never tried refilling myself any tips about not to do and to do? thanks
@aabsas4517
2 жыл бұрын
@@OrdoAirsoft and also is there ways to change the psi to 3000 because 4500 psi is illegal in my region thanks
@OrdoAirsoft
2 жыл бұрын
With this compressor you can fill to whatever psi you want up to 4500. So if you want to only fill to 3000 that will work perfectly fine. We can't give you a link because ours was ordered from ebay and those listings are always changing. Order the one that doesn't have the auto cut-off feature because I have heard those are nothing but issues. As far as filling tanks goes just watch the gauge carefully, and follow the steps we went over in our video.
@Tunnelrat6666
3 жыл бұрын
How this going after a few months now?
@OrdoAirsoft
3 жыл бұрын
It's been running great, no issues yet!
@alifhakim5251
3 жыл бұрын
@@OrdoAirsoft hi, ive been using same compressor like yours. Once i finished with the refill process, i released the valve, supposedly it should be releasing all the air from the compressor, but turn out it is also releasing the air from my fill nipple. After all the air has been released out, i found out the o ring has broken. is it normal for the o ring to be broken or ive missed some important step.
@OrdoAirsoft
3 жыл бұрын
Replace the o ring first, but also your fill nipple may need to be replaced on your tank because its a 1 way valve it should not let air back out of the tank.
@EggyLive
11 ай бұрын
10:54 10 bucks for 1 filling? holy cow. what a rip off.
@FLAlesslethal
6 ай бұрын
NO NO NO DO NOT. WHY DO YOU THINK IT HAS THE HUGE FAN AND HAVING TO USE A BUCKET WITH ICE WATER AND THEN THINK ABOUT THE MOISTURE ITS FEEDING YOUR MARKER. NOT TO MENTION IT IS A PUMPING TIME BOMB BRO. " MONITOR YOUR HEatgage! Really? People are so desperate... Just wait and save a little more cash. I really cant believe im seeing this video!
@Mr89netrom
24 күн бұрын
Fan cools motor, the water is for cooling the compressor part itself. You would thing pumping 200x the atmospheric preassure wil make some heat. I wil agree that condensation can be an issue. But allso moisture itself can be an issue. Then a filter-dryer will be better.
Пікірлер: 81