SATA cable Serial ATA power supply ATcom
Total length 18cm
The length of the wires is 13cm
Molex male connector (4 pin)
SATA connector female 15pin (power supply)
Compatibility: with a power supply unit with a free Molex male connector
Delivery set: adapter, soft pack
Warranty: Most suppliers are ready to exchange / return within 14 days
This model is designed to connect components with a SATA male power connector (SSD, HDD, CD / DVD). The wires themselves are made of UL-Style 1007 copper. By colors: one 12V wire (yellow), one 5V wire (red), two ground wires (black). It is connected to the power supply using a 4pin Molex connector: on the mother body, on the male contacts. Internally, the device (HDD, DVD drive) is connected using a SATA connector: male on the body, on female contacts.
How does this adapter work? The adapter converts the Molex female connector on the power supply to a SATA female connector. After connecting to the power supply using the Molex connector, you can connect a device with a SATA interface (black flat).
How to stay safe and start operation, a short algorithm 1. You must first de-energize the system unit before connecting the adapter to the power supply connector. 2. If necessary, unplug the connector by holding the housing, not the wires. 3. Make sure that the connected element meets the recommended power ratings and that the key (figure) of the connector is in the correct position. 4. Do not insert the connectors forcibly, if you cannot connect or the connection is tight - disconnect and reconnect.
Негізгі бет Atcom 3798 cable
Пікірлер