i replaced the belts on my atlas 10f with the adjustable link belts and they work perfectly. they also cut down on vibration. the lathe actually runs smoother with them. at first i only changed the belt for the motor to countershaft the inner belt was fine. the lathe seemed quieter and smoother so i replaced the inner belt which was fine it was just super old being the original. changed that one also and the results were really great. i highly reccomend them
@savage22bolt32
4 жыл бұрын
My brother-in-law saved one from getting scrapped and gave it to me. It's grimy & looks pretty beat. As I started cleaning it up I thought, how the heck am I going to replace that dried out vee-belt? Well, now I have some very clear guidance. THANK YOU SO MUCH !!!
@cjc1216
4 жыл бұрын
I have been trying to figure this out and find the belts forever and i just came across this video, thank you so very much sir now i can get the old girl up and running and back to work finally
@VegasOBie
4 жыл бұрын
This was my first KZitem video as you can tell. But it was an all day event because I have to figure it all out myself. Glad it helped.
@VegasOBie
4 жыл бұрын
i love KZitem UNIVERSITY, where I can find out how to fix ANYTHING. I'm gald my little input added the the UNIVERSITY'S information.
@gosolobox
Жыл бұрын
Any more info on the QC box for the little 618? Very cool..
@DanTheFordFixer
3 жыл бұрын
Thanks I had wondered why the back gears would fall out of my lathe when I tried to use them the ball and spring must be missing.
@georgespangler1517
3 жыл бұрын
They have link belts,,,much easier and smoother running and you don't have to go through the Hell of taking spindle apart,,,25 dollars and 5 minutes.
@snafuhobby
5 жыл бұрын
Hi Robert, enjoyed the video getting ready to change my belts too. What can you tell me about the qc gearbox. I'd love to have or build one for mine
@VegasOBie
3 жыл бұрын
See new link above.
@joeybobbie1
3 жыл бұрын
Hi, where did you find a Gear Box for Threading that fit the Atlas 618? I didn’t know that was even available on these Lathes. Is it some kind of Aftermarket item? I would really appreciate any information.
@VegasOBie
3 жыл бұрын
It came with it when got it (Used) ????
@VegasOBie
3 жыл бұрын
See new link above.
@thomasutley
3 жыл бұрын
Robert, great video, very helpful. If you still have this machine, can you tell me the width and height of the original Atlas data plate shown at the beginning of the video? I have the artwork done to make a replacement for a lost tag but don’t have to measure for scaling the photo I traced. Thanks!!
@VegasOBie
3 жыл бұрын
After restoring the Lathe I used it for a while then bought a Grizzly G0824 and gave the Atlas to my son. He lives 80 Miles away, but I am going to his house the 3rd week of Aug 21 so I'll get some photos for you. An other follower wants photo / Video of the Quick Change Gear box that came with the lathe and I hear never had one???
@VegasOBie
3 жыл бұрын
See new link above.
@thomasutley
3 жыл бұрын
@@VegasOBie Awesome. Just sent the access request for the Google Drive folder!
@VegasOBie
3 жыл бұрын
@@thomasutley I think both links are now shared to ALL? I'm new to this SHARING THING?
@thomasutley
3 жыл бұрын
@@VegasOBie Got 'em. Thanks again, very helpful!!
@georgespangler1517
3 жыл бұрын
There's a so much easier way,,it's called a link belt,,,so much better runs smoother and you don't have to take anything apart,,,25 dollars and takes 5 minutes to install
@johnjenkins6609
4 жыл бұрын
Robert is that a QC gearbox on your 618? Did you make that?
@VegasOBie
4 жыл бұрын
I'm not the original owner. As you can see I got this cheap due to condition. I did disassemble, clean, adjust, replace old wiring, put an OFF/ON Switch on the front and then put back together better than I got it. I did NOT add anything except for the tool post and front switch. I gave it to my son and went out and bought myself a Grizzly 14" x 40" lathe.
@johnjenkins6609
4 жыл бұрын
Robert OBremski the 618 was never available with a QC gearbox is why i was asking and I’d be very very interested in seeing some pictures of the QC gearbox on the lathe
@racing7006
3 жыл бұрын
@@johnjenkins6609 Did you ever find out anymore about the added gears?
@VegasOBie
3 жыл бұрын
Yes, it came with the lathe.. I gave this one to my son and I bought a Grizzly Gunsmith Lathe.
@johnjenkins6609
3 жыл бұрын
I’d be really interested to see pics of it if he’d be willing to take some of the qc gearbox
@wesleyburnham451
3 жыл бұрын
I would like to know the size of the pulls are for the drive belts
@VegasOBie
3 жыл бұрын
Sorry I don't own the Lathe anymore, I bought a Grizzly G0824 and quite happy with it.
@antoniolouro9347
2 жыл бұрын
hello, where did you get the lathe screw spindle replacement box?
@VegasOBie
2 жыл бұрын
It came with it and I no longer have the lathe, I gave it to my son... SEE: the link above for more PICTURES of it.
Пікірлер: 39