The smiles on your faces says it all. Great job well done
@SailingAnneMon
2 ай бұрын
Thank you ☺️
@johncurry6047
2 ай бұрын
Well done!! I can go to bed now!!! I was so impressed I watched all 17 episodes. That is some boat you have there. looking forward to more from you😃😃😃
@SailingAnneMon
2 ай бұрын
Thank you! 😃
@farmerjimbob67
2 ай бұрын
Care and precision by the bucket load- brilliant job - well done!
@Cptnbond
2 ай бұрын
What an amazing project to carry as DIY's, a real inspiration of what can be achieved with the will power of two people. Cheers.
@SailingAnneMon
2 ай бұрын
Thank you ☺️
@imar758
2 ай бұрын
You have done very well. Congrats to both of you. All the best to you and your boat.
@SailingAnneMon
2 ай бұрын
Thank you ☺️
@guidouytterhaegen
2 ай бұрын
You better use fine tread rod,and certainly not rvs to pull the cutlass in. Big work though!! That keel.
@robertszyszynski7959
2 ай бұрын
GOOD JOB .
@dingomaxy7682
2 ай бұрын
Awesome job ah!!
@KatamaranLarry
2 ай бұрын
Nice! Perfect!!!😊
@SailingAnneMon
2 ай бұрын
Thank you ☺️
@markusm3761
2 ай бұрын
👍🏻 great job
@SailingAnneMon
2 ай бұрын
Thank you ☺️
@gordonagent7037
2 ай бұрын
Hi Thomas and Petra from the Gold Coast, Queensland, Australia, I just found your channel and this keel really caught my attention when I visited your home page. Firstly I think you have made a wise decision with the old hydraulic keel, unless you were prepared to do a thorough rebuild you have chosen the best decision and secondly, wow, that keel pour was just awesome, I had my doubts as saw a very similar attempt on another channel with a bad outcome, yours was simply spectacular, will you spend some time and fair the surface at some stage because I suspect it will cause drag through the water and also promote marine growth as it is, just a thought. Also, that sleeve you fitted, put them in the freezer for a few hours or better still in dry ice and the diameter will shrink enough to make it an easy interference fit. Love what you guys are doing, have subscribed and given a shout out to friends to look and subscribe. Hope you had a good nights sleep.
@SailingAnneMon
2 ай бұрын
Thank you those kind words 😊 would love to visit Australia one day, hopefully with this sailboat! Yes, we will fair the surface (currently working with that and other stuff needed in order to finalize the keel) 😊
@perrrah
2 ай бұрын
momentskaftet från döds, grymt jobbat!
@adrenazanetti3660
2 ай бұрын
Curious, how much does the lower keel weigh? Great video! A job well done and one I’d never tackle myself!!
@SailingAnneMon
2 ай бұрын
It weighs 3700 kg (8100lbs) 😊 thank you! And we hope we won’t have to do it again 😅
@jonasjohansson9060
2 ай бұрын
Hej! Några tips: Man kan tillverka en borrmall i plywood eller liknande för att undvika att hålen hamnar på fel ställe, kanske kan vara bra att komma ihåg till något annat jobb. Angående gängstängernas åtdragningsmoment...Det är enormt stora skillnader på klämkraften i ett skruvförband om man smörjer gängor eller ej. Det kanske känns självklart men jag tror många skulle bli förvånade över HUR stor skillnaden är. För att "ta bort" dessa skillnader finns ett verktyg som sträcker skruven hydrauliskt till rätt värde och sedan lägger man åt muttern. En bekant till mig var på studiebesök på Wasa Yachts när de fortfarande byggde båtar(lääänge sedan). Och om jag minns rätt så användes just den metoden. Finns kanske kunskap kvar om detta på varvet fortfarande. Jag tycker inte man bör chansa med kölar..Ganska viktiga prylar att ha. Mvh. Jonas
@andersnilsson6625
2 ай бұрын
Grattis till ett bra jobb 💕😀😄🇸🇪
@SailingAnneMon
2 ай бұрын
Tackar ☺️
@offpro
2 ай бұрын
Imponerende!
@SailingAnneMon
2 ай бұрын
Tack ☺️
@jeanrieu5855
2 ай бұрын
Bonjour, je viens de découvrir votre chaine ! Travaux fort intéressant ! Car suis également en rénovation d un voilier ancien en acier ( plan CAROFF ) EN FRANCE. Et vais devoir faire des modifications de quille 😅 Avez vous fait le moulage et la fusion de cette torpille/ bulbe ? Auriez vous qques vues de l intérieur de l embrillon de quille (saumon ?) sur la quelle sont repris les boulons/ écrous de vos tiges filletés ? Afin de comprendre et voir comment sont fait les renforts pour supporter la masse ( quel poids de plomb ??) Je dois prévoir un lest de 4 tonnes pr mon voilier ( 13,5 x 4,60 Mètres ) Merci à vous si vs pouvez me consacrer un peu de temps ! Pas très facile de + quand on ne parles pas la même langue ! Bon courage à vôtre projet 😊 Jean Marc.
@ChrisBrocksmith
2 ай бұрын
Anti seize will cause a decrease in torque capability by about 10%.
@chhindz
2 ай бұрын
Some people's idea of DIY is change the oil and impeller.
@adrenazanetti3660
2 ай бұрын
🤣😂👍🏼
@jeffreynerdin3522
2 ай бұрын
Great work. Sorry if I missed this explanation, but what are the plans for filling mom the window in the rebuilt keel?
@SailingAnneMon
2 ай бұрын
Thank you ☺️ We plan to keep the hole empty, but cover it with plates 😊
@jeffreynerdin3522
2 ай бұрын
@@SailingAnneMon You can put a waterproof safe down there to store your gold bullion and your doubloons or you could turn it into the world’s most challenging geocache. So many opportunities. No wasted space in a boat.
@MUDNROCKS
2 ай бұрын
Are you going to re-torque those nuts again once the epoxy has set fully ? What's the plan for locking them up, double nuts or secondary nylocks or something ?
@SailingAnneMon
2 ай бұрын
Yes, we will re-torque them after the epoxy has cured 😊 we will lock them in with epoxy padding, but as we’ve done a proper pre-tension while torquing the nuts locking them isn’t needed as the rod will act as a spring with its pre-tension 😊
@HakanSjo
2 ай бұрын
Fantastiskt jobb! En fråga. Ni ser ingen fara med att ha muttrarna till kölbultarna i underkant av kölen. Smäller ni på så är det ju dom som tar smällen…?
@SailingAnneMon
2 ай бұрын
Tack ☺️ muttrarna är infällda i kölen så de är lite skyddade av kölen i sig. Vi resonerar lite såhär; om vi touchar lättare så kommer muttrarna skyddas av att de är infällda. Om vi å andra sidan går på grund så rejält att muttrarna tar skada har vi då också andra skador att ta hand då också 😊
@HakanSjo
2 ай бұрын
Det är säkert ingen fara och kommer gå bra. Lycka till med det fortsatta arbetet.
Пікірлер: 38