Great tips Ryan Gorilla glue is a ployurethane based glue that's why they say to put water on one surface . Thanks .
@RyanCookCarvin
3 жыл бұрын
Thanks for the info! tru tru
@royallen4778
3 жыл бұрын
Thank you Ryan for your demonstration on joining wood. I asked you a month or so ago how it was dine. You told me how, and I used it already. but viewing it makes it so much easier to understand, Thanks again. I am learning a great deal from watching your videos.
@RyanCookCarvin
3 жыл бұрын
Glad I could help! amazing
@virgilthewolf8950
3 жыл бұрын
Cheers for that I’m really enjoying the way you do your tutorials there fun and extremely helpful. I have only been carving a few years self taught and only just recently stumbled across your videos, seen lots of carvers doing the “ look at me videos “ but unlike most videos yours are actually tutorials and I’m learning heaps from you. Cheers again more appreciated than you most probably realise.
@MathieusChainsawCarvings
2 жыл бұрын
i like to countersink the screwholes and plug m op with a dowel, i hit less screws like that as well :-). Thanks for sharing.
@samvitale868
3 жыл бұрын
What is up Ryan water works with the glue for sure!!!😎3️⃣☮️👍🏻👀👋🧐
@RyanCookCarvin
3 жыл бұрын
cool cheers bud thanks
@cordeliablakeslee7964
3 жыл бұрын
I've heard good feedback about the Stodoys plans.
@gypsywolf58
3 жыл бұрын
Thank you SO MUCH, FOR THE GLUE & SCREW VIDEO!!! You're always, ALWAYS, helping me!!!! ( everyone) Happy New Year!!
@glenmckelvey5952
3 жыл бұрын
Happy New year
@RyanCookCarvin
3 жыл бұрын
happy new years to you both :)
@gypsywolf58
3 жыл бұрын
@@glenmckelvey5952 happy new year Glen!!
@brianmoore7910
3 жыл бұрын
Great tutorial Ryan 👌 keep up the great work 👏 can't wait for the wings
@RyanCookCarvin
3 жыл бұрын
Thanks so much!
@duanevanwinkle3488
3 жыл бұрын
Very Helpful!!!! Gorilla Glue recommends on the bottle to Dampen Bonding Surfaces before applying glue. It activates adhesion!!!!
@RyanCookCarvin
3 жыл бұрын
Thanks for the info!
@benthechainsawsculptor7553
3 жыл бұрын
Yeah buddy! Looking forward to the wing vid!!
@RyanCookCarvin
3 жыл бұрын
u bet
@RyanCookCarvin
3 жыл бұрын
really same thing applies from this vid thou too
@larrydale3906
3 жыл бұрын
Thanks alot, still got some practice to do but I see this in my future.
@RyanCookCarvin
3 жыл бұрын
You can do it!
@neilfreeman4443
3 жыл бұрын
great tips Ryan thks for shareing
@RyanCookCarvin
3 жыл бұрын
Happy to help!
@iancocksedge3938
3 жыл бұрын
hi ryan. happy new year, great video, very helpful, thanks. keep up the great work and stay safe.
@RyanCookCarvin
3 жыл бұрын
Thanks, will do!
@olafgeisler8967
3 жыл бұрын
that is a very good representation of the extensions and the adhesive technique, very good 👍
@RyanCookCarvin
3 жыл бұрын
Glad you like it!
@jordanzothegreat8696
3 жыл бұрын
Thanks buddy, I was dwelling together joints, but I trust you with some trim head deck screws and the glue
@RyanCookCarvin
3 жыл бұрын
u bet man will work for almost anything
@lizakin1274
3 жыл бұрын
Great tops Ryan.
@RyanCookCarvin
3 жыл бұрын
thanks liz happy new year
@DrBobDeYoung
2 жыл бұрын
Thanks for the tips. i was wondering, just exactly, what type/model of face/breathing protection you suggest...thanks
@griffinswoodworks
3 жыл бұрын
Needed this vid to add to my confidence level with doing larger joinery stuff.... much apreciated, Ryan. Happy New Year, bro - Take care - Griff
@RyanCookCarvin
3 жыл бұрын
Happy new year!!
@nexuschainsawmassacre2546
3 жыл бұрын
thanks for your great tutorials, cheers
@RyanCookCarvin
3 жыл бұрын
Glad you like them!
@craiglittle1836
2 жыл бұрын
Could you please tell me what type of drill you use and type of screw ? I’m thinking I need a hammer drill as my screws strip out currently. Thank you for all you do. You certainly have inspired me and helped me with your many tips. Samish Island wood carver Wa.
@akron20
2 жыл бұрын
Ryan, I bought a 10 foot tall totem pole type carving. How can I best add a base so that I can display in the middle of the room and not worry about it tipping? Thanks much
@darnellsprmla47
3 жыл бұрын
So I did it too :D just using Stodoys woodworking plans :)
@RyanCookCarvin
3 жыл бұрын
Oh nice!
@shootthemoon6072
3 жыл бұрын
What a happy looking Samsqantch Edit- Yeti. Lol
@romannepoitras8981
3 жыл бұрын
Ryan, what chainsaw carving book would you recommend for a beginner?
@shootthemoon6072
3 жыл бұрын
The users manual😂
@rodneymeshigaud8128
Жыл бұрын
Do you only use gorilla glue? Or have you use other types? Titebond etc?
@srdjansimic669
3 жыл бұрын
Pionir
@RyanCookCarvin
3 жыл бұрын
thanks
@buildtalibanbackbetter5923
3 жыл бұрын
I do my joints on my kayak 😀
@RyanCookCarvin
3 жыл бұрын
lol great spot specially holding a fishing rod in other hand
@spikewillow4552
3 жыл бұрын
"Like A Glove"
@RyanCookCarvin
3 жыл бұрын
Spike can you message me on Facebook
@michelfounaud1645
3 жыл бұрын
very informative. the difficulty is to obtain two perfectly flat surfaces when it is necessary to assemble larger pieces. how are you doing? Thank,s ryan. Michel
@RyanCookCarvin
3 жыл бұрын
doing great thanks the two flat surfaces come from 2 clean cuts
@michelfounaud1645
3 жыл бұрын
@@RyanCookCarvin Thank,s ryan
@amandahoward4933
Жыл бұрын
Can you join two 3ft logs together to make a 6ft log to make a bear if so how ?
@shootthemoon6072
3 жыл бұрын
You may have addressed this before, but what kind of mask are you using? The medical ones make great woodgrained boogers, but that's not what we're working towards. 🤔 Or are we? 😂
@srdjansimic669
3 жыл бұрын
Log homes
@RyanCookCarvin
3 жыл бұрын
thnx
@Ruf-Art-by-Tim
3 жыл бұрын
Alberta boy says.....well if I ever find the desire to screw a Yeti....I know who to ask for more advice, do you find that chloroform helps ? No really in all seriousness, that will come in " Handy" !
Пікірлер: 60