that doesn’t matter, what matters is the heat of the glass. he needs to rotate the glass stick so the glass stays apart of the stick longer, and heats up even more a consistency as runny as maple syrup before letting it drop (possibly even in a deeper water basin too)
@skullzyy6633
Күн бұрын
@@WrenFairXhe’s still right🤣 he said he would snip the very end and yet again he didn’t
@2dmaximum991
3 ай бұрын
Bro snapped the middle again
@LimLostAse
3 ай бұрын
Yes.
@billyruiz5478
3 ай бұрын
For real
@kurdgamer2256
2 ай бұрын
Hey the creator if you see this you have to curvet little bit
@Aspect-ethan
Ай бұрын
this is a real "aww shoot, here we go again." moment
@Peter-o8l1s
25 күн бұрын
Hes does it on purpose 😂
@williamkendall-ki1wy
3 ай бұрын
Video: “The very end” My eyes: “The very middle” 😂
@Basil-z9e
26 күн бұрын
Lol
@WrenFairX
5 күн бұрын
that doesn’t matter, what matters is the heat of the glass. he needs to rotate the glass stick so the glass stays apart of the stick longer, and heats up even more a consistency as runny as maple syrup before letting it drop (possibly even in a deeper water basin.)
@williamkendall-ki1wy
5 күн бұрын
@@WrenFairX I said that because the guy said how people said he did not cut the end and then he said he did and it was clearly not the end
@imalwayswatching5103
3 ай бұрын
Dude refuses to snip the goddamn end
@crabiiiscool
13 күн бұрын
Anything for views I guess
@LockInLogIn
12 күн бұрын
@@crabiiiscool 😮
@Dosznews
7 күн бұрын
EXACTLY BRO THAT’S WHAT I’M SAYING
@Young-mind.TheMillion
7 күн бұрын
Bro's milking the series, gotta get that bag, yaknawadamsan
@WrenFairX
5 күн бұрын
that doesn’t matter, what matters is the heat of the glass. he needs to rotate the glass stick so the glass stays apart of the stick longer, and heats up even more a consistency as runny as maple syrup before letting it drop (possibly even in a deeper water basin.)
@Schwiftygetter
3 ай бұрын
Glass wasn't heated enough basically, it should be much more liquid consistency like maple syrup, he is letting the drop fall too quickly by its own gravity, he should be rotating the rod in his hand to keep the molten glass pooling together before letting it fall into the water :) - Professional glass blower
@oliverwithers9736
3 ай бұрын
Yeah that’s what I said too. It’s got nothing to do with where the drop is snipped it’s that it isn’t anywhere near hot enough and needs to be as hot as he can physically get it before it falls so rotating it stops it from falling too early. Source: I dunno I’ve just watched like 100 vids of people making them.
@v1ncebutjustthehat633
3 ай бұрын
Wonderful insight
@theepic1751
2 ай бұрын
So if you’re a professional glass blower, and glass is clear, and something that’s clear could be called invisible, and something invisible isn’t there since it can’t be perceived, you’re now technically a professional blower.
@homevideos5902
Ай бұрын
He can't control how much gravity is pushing
@oliverwithers9736
Ай бұрын
@@homevideos5902 no, but rotating the rod causes the drop to not fall and stay apart of the rod longer allowing it to get hotter.
@SeniorCrude15
3 ай бұрын
THE VERY END.
@Cyptydes
3 ай бұрын
wtf is your pfp gng
@Autistic_Wooper
3 ай бұрын
You have multiple of the subscribtions I have
@SeniorCrude15
3 ай бұрын
@@Cyptydes I like wolves
@SeniorCrude15
3 ай бұрын
@@Autistic_Woopergreat.
@RusselRodinas
3 ай бұрын
Shut up@@Cyptydes
@Animeplatypus
28 күн бұрын
Bro snapped the middle lol
@teknofex10
3 ай бұрын
At this point he's just trolling us
@Djsjsjsjs-q3s
3 ай бұрын
No good eye protection and not even snipping at the end smh🤦♂️
@minecraftnoob4273
3 ай бұрын
You need to rotate the the glass rod as you melt the end of the rod
@greg5145
2 күн бұрын
The actual reason is the uneven heat distribution if anyone is curious
@Caleb-ke3zk
27 күн бұрын
When you finally find the music mark rober uses
@enorb_art8211
3 ай бұрын
Get better goggles those don't protect your eyes from the light of the torch
@girls_girl101
3 ай бұрын
We all know that that drink was placed there specifically💀💀
@DarkSho21
3 ай бұрын
dude really snapped it in the middle
@EEEEEEEEEEEEEE-pn3be
26 күн бұрын
Bro you have to use a hammer or pinch it AT THE VERY END
@HeroXeun
Ай бұрын
My guy just has the power to make unbreakable prince Rupert drops
@Cotton-xs5ib
Ай бұрын
Bros gas bill after he finally gets one 📈📈📈
@dylanmaycock-jones5014
Ай бұрын
“today i will be marking a package glitter bomb” type music
@Chase_287
3 ай бұрын
You even said you would snip the END OF THE DROP
@keiramcendree6646
25 күн бұрын
YOU SNAPPED THE MIDDLE AGAIN BRO!! THE TIP OF THE TAIL!!
@innermoon5360
Ай бұрын
THE FUCKING END
@swiftyoooo
7 күн бұрын
i gotta respect the commitment to the engagement farming
@seanrose6957
5 күн бұрын
Bro snapped the middle again🤦♂️ I feel like he’s just trying to extend this series as far as he can
@Cubcakes844
3 ай бұрын
Cold water no ice. Spin the glass to make it work
@emissne
8 күн бұрын
bro snapping the tail off is brother making the most indestructible object in the world 💀💀💀
@Rylandsandberg-d3p
19 күн бұрын
Mark rober owns this song lol 😂😂
@alicjajasz
9 күн бұрын
Bro just made something indestructible and is ignoring it 💀
@amgoober93
Ай бұрын
Do it in ice water. Or with a hotter torch. You should be able to get more tension inside the drop if it contacts from the change in temperature more rapidly. Greater change in temperature means more fractures
@laurafast408
Ай бұрын
You snapped the middle, not the end😂
@gorizzla
6 күн бұрын
quick, guys! point out that he's snipping the middle so that he gets more engagement!
@terrotafk
4 күн бұрын
this is like his whole channel at this point
@jafsereyt8523
2 күн бұрын
“I snipped the vary end” *snips the middle*
@rachelmccauley9986
7 күн бұрын
You're making a stronger friends with its drop
@ogbuzzy1974
20 күн бұрын
Sometimes the bubbles indicate it wasn't hot enough. Bubbles cause issues with the internal tension in the drop
@Thegamindino15
2 ай бұрын
The very end to u is the middle to us he just trying to keep this series going lol
@BenP-ho8hb
6 күн бұрын
THE ENDDDDDDDD OF IT
@mikinius
Күн бұрын
The hottest point of any flame is the very end of it.
@pcgamer7490
7 күн бұрын
So it works by realising stored pressure at the bulk thing. Since u use a hollow rod it’ll have air pockets where the glass can expand and not shatter
@izusoda
8 күн бұрын
using the torch up close actually delivers less heat than if you held it slightly back and let the tip of the flame heat the glass
@ThatBoyAK
12 күн бұрын
He just accidentally made the strongest piece of glass ever
@rxmbo3749
9 күн бұрын
The ragebait is top notch
@Anime_edit_of_e
3 ай бұрын
The glass rod needs to have no whole in the middle
@MasterOfBlueFlamesFM
3 ай бұрын
you can mak3 an unbrakeable window if you made enough
@darcyharpur1150
11 күн бұрын
Imagine trying to look through it
@ElistetItIs
8 сағат бұрын
I think the problem might be that you move the torch a lot this causes areas to cool down (even if just the tiniest bit) I'm no expert but I think that shouldn't happen since it manly shatters cause if the sudden cooling from the water from what I know so I think the constant moving of the torch allowing areas to slightly cool destroy's the effect. Maybe a bigger torch that envelops the whole drop would help cause you don't need to move it then and the heat is even.
@Eaza_27
9 күн бұрын
Dude, the torch has to be blue. That’s the color of the hottest flame you have to use to make a prince Rupert drop
@Superking_gaming
14 күн бұрын
And then, he has infinite power, the unbreakable prince rupert
@spongebob2.08
6 күн бұрын
At this point he’s doing this to mess with us
@ElleryBailie
3 ай бұрын
He needs to try snipping it in the water
@DylanCisneros0925
Ай бұрын
Tbh he did make the true unbreakable glass
@FPSHORUS
3 күн бұрын
It’s because your using a hollow tube. The drop can only be made by a solid glass tube.
@_Ledoot
8 күн бұрын
Bro got advice and refused to believe it
@strickersniper7909
8 күн бұрын
Bro called pliers scissors
@callmeOVIYAA
7 күн бұрын
Bro get the container of water closer to the glass so when it melts there’s no air bubbles
@Owlplayz11
29 күн бұрын
Make a shield out of prince Rupert’s drops and test a bullet on the shield
@Rebel4Life777
Ай бұрын
Snapping the end ❌ Snapping the fucking middle still ✅
@krazyaidann
3 ай бұрын
I know how, dont melt it from the bottom, it makes the drop a little long and i think which is causing it to not break when the tail is destroyed. Instead melt it from the side not to high up and i think you will get a genuine prince rubert drop.
@FunnyBunnyIsCool
9 күн бұрын
THE VERY END! My guy like what-
@tashablue
3 ай бұрын
You're still not on the very tip. Rotate your tool 90°, situate the tip on the middle of the pliers & squeeze.
@cricketuserr4030
Күн бұрын
Not the ad, get yo bag!
@NalaLay-xr8vk
13 күн бұрын
From what I've seen, they've always used thinner glass. Not as thick diameter on the glass stick.
@alexxaz515
8 күн бұрын
“The end” 💀 Bro it’s so obvious it’s the middle
@DiegoRamirez-hn1ur
6 күн бұрын
He said “nah ima do my own thing”
@CherryRexy
Күн бұрын
The hatred I feel is inconceivable
@calvindehoff9045
7 күн бұрын
I think bros doing it on person so more people engage with his content. It’s working lol
@HatWhite
9 күн бұрын
Cool fact, when your prince Rupert’s drop is glowing, touch it, the feeling is like no other (kids don’t do this)
@Pepe_SDL
3 ай бұрын
btw theorethically blue fire is way hotter than normal fire so i suppose he downgraded his torch... and he probably noticed it was slower at melting the glass but didn't say it for the content.
@PaladinGames5
5 күн бұрын
Bro used the marcus rober music
@_biggiewiggie2
3 ай бұрын
bro we mean THE ABSOLUTE END LIKE GOD DAMN
@PifteVerdonck
27 күн бұрын
Hold the flame at the same place the whole time
@johnrunge6349
3 ай бұрын
THE END OMG
@8wing73
2 ай бұрын
Glasses melting point is kinda a grey area. Instead of melting the drop fully you only partially melted it. Also known as slumping it.
@A_turkish_brother
Сағат бұрын
Mark Rober ahh music
@zxkry.
3 күн бұрын
Bro's just messing with us
@TheOldHistorian1929
3 ай бұрын
Maybe it’s because you’re moving the torch around so it’s redirecting heat in different areas making not even
@TheOldHistorian1929
7 күн бұрын
Yeah that’s what I thought
@averylockwood
5 күн бұрын
love the C4, best flavor too
@SquooshyCatboy
3 күн бұрын
you’re using the wrong kind of glass, man.
@angry_mig474
3 ай бұрын
When we say the very end we mean the very end, the very tip tail of it
@huang1111
3 ай бұрын
Cuz if you snapped the tailor won't break
@egg1490
3 күн бұрын
the problem might be that youre using a glass tube instead of a rod (that isnt hollow)
@brandonhinojosa660
3 ай бұрын
The very very end bro
@romarrmimis792
25 күн бұрын
It got to have no bubbles in it.😂
@dylanhulderson5785
13 күн бұрын
It's because you're using a hollow glass rod the bubbles inside mess with the stress of the shape thus making it not a prince Rupert's drop
@usarasanumitha4540
7 күн бұрын
Bro snap the very end of the tail
@alieninvasion2950
3 ай бұрын
Make the container larger so it cool before it hit the bottom and see if that helps
@Merley2011
21 сағат бұрын
The type of water matters too
@SuperMVR
11 күн бұрын
The very middle😂😂
@da1slimdenny804
5 күн бұрын
Supposed to let it drip into oil so it cools faster and don’t have air bubbles
@duinthadope420
3 ай бұрын
You're supposed to hammer the drop to add stress to the glass. Then it will shatter.
@excalibruh1380
7 күн бұрын
cant expect someone who calls glass detailed to do something right the 7th time
@zuziastolarska9123
3 ай бұрын
I think that when you are melting it the flame was on a "head" you need to not go down with flame chasing drop but leave it in the same place it on the tail. Do you know what i meen?
@pbchocolate584
3 ай бұрын
It looks like you're using a glass tube to make it. Air is getting trapped inside. You need to melt solid glass for it to work
@lejpkb
3 ай бұрын
He’s not even snipping it inside the water
@island.pro.roblox7830
6 күн бұрын
I think you should use a glass rod instead of a glass straw shape and see if that works better
@thewyguy4972
3 ай бұрын
You're supposed to twist the rod while you melt it so the tail is longer
@corbeast1239
3 ай бұрын
The very end don’t even cut it
@Meeeehungry
Ай бұрын
Blud does not learn from his mistakes 💀
@Fortnite-clips-and-streams
7 күн бұрын
You are using the wrong glass I swear to god I’m not lying
@icarus1049
3 күн бұрын
Bros Prince is not Rupert😂
@gavinshaffer6220
8 күн бұрын
You also need to not make it from a hollow tube. You’re getting air bubbles in the drop.
Пікірлер: 633