What a sweet little diesel-not a bit of smoke almost immediately, sounds like a nice runner! Very much enjoyed watching Sir-thanks for taking the time to put this up.
@73DiamondReo
9 ай бұрын
thanks for watching
@davidzamora4423
10 ай бұрын
First time seeing your videos. Thank you for sharing this. Very interesting.
@73DiamondReo
10 ай бұрын
Thanks for watching!
@halfinchholes88
9 ай бұрын
What a nice little engine! I was skeptical when you could hear and see the water sloshing around inside. Thankfully, a low-spot to hold the water back from entering the cylinders. In the end, you saved it from the scrapper, and hopefully bring some life to the cable excavator. Look forward to your next video in this series!
@73DiamondReo
9 ай бұрын
I’m happy with how it runs. Worth putting some money into now
@albertdouglas7477
10 ай бұрын
Nice job....
@gleanerk
9 ай бұрын
Totally enjoyed watching every minute! Meant for scrap but you gave it back it’s life ! Well done fella !
@73DiamondReo
9 ай бұрын
Glad you enjoyed it
@duanelawrence78
9 ай бұрын
That engine runs great and no smoke either!!✌️🇺🇲
@73DiamondReo
9 ай бұрын
Yes it does!
@HODGEPODGEDODGEGARAGE
9 ай бұрын
*Fantastic job Frank!* 🙂👍 You put in the effort where most people would have gave up. You just showed proof that just because an engine might be stuck, it's not ruined. Happy to see the cable hoe move at the end too. Take care, be safe and happy wrenching 🔧🔩
@73DiamondReo
9 ай бұрын
im glad i didn't waste my money on scrap. wait until next weekends video
@JourneymanRandy
10 ай бұрын
Good save and it sounds nice too. 🔧🔩
@mischef18
9 ай бұрын
After ya got it unstuck it runs like a champ bro, great video too. Safe travels. Ken.
@73DiamondReo
9 ай бұрын
Yeah I’m quite happy with it
@Mhurtle65
5 күн бұрын
Nice man.....
@73DiamondReo
4 күн бұрын
Glad you liked it
@VintageFarm1086
9 ай бұрын
That's a nice little engine. Good job on getting it going. I am looking forward to seeing the engine swoop.
@73DiamondReo
9 ай бұрын
Not 100% positive on the direction we are headed right now
@JonathanFederoff
9 ай бұрын
Compressor for the win!
@walterlamb4756
9 ай бұрын
What a find! Hope the conversion goes well!!!
@neilmcintosh1200
9 ай бұрын
Now that was a result!!
@kenfrazier616
9 ай бұрын
score on the find, sounds great
@waltergorzkowski7246
9 ай бұрын
Nice job on getting it going. Great save Frank
@73DiamondReo
9 ай бұрын
Thanks wally
@SteamCrane
9 ай бұрын
I really enjoy watching you work thru the issues!
@73DiamondReo
9 ай бұрын
i cut most of the ads out. didn't realize they put so many in there.
@SteamCrane
9 ай бұрын
@@73DiamondReo I am not monetized, but you still get blitzed with ads on my stuff. So most of those ads probably benefit YT, not you. Yootoobs business model is probably not sustainable. I note that most of the ads are low end, like late night TV. Anyway, I watched the whole video, and really liked watching the process. That trailer looks like something you'd like to have several of.
@73DiamondReo
9 ай бұрын
Trailer should be pretty handy to have around. I think I did alright with my scrap yard auction buy between the trailer, tank of fuel and the engine. Next video will be equipment related.
@SteamCrane
9 ай бұрын
@@73DiamondReo Keep 'em coming!
@lewiemcneely9143
9 ай бұрын
Way to go, Frank God Bless!
@73DiamondReo
9 ай бұрын
thanks
@lewiemcneely9143
9 ай бұрын
U 2, Pal!@@73DiamondReo
@DieselCreek
9 ай бұрын
Put the compressor on the trailer
@73DiamondReo
9 ай бұрын
i might. I have that other compressor on wheels that needs fixed yet. less cfm but would be more handy
@oldamericaniron5767
9 ай бұрын
Where some people see scrap other people see potential. Should make great repower for the 10B.
@73DiamondReo
9 ай бұрын
I thought so but still not sure the route im going to go yet
@oldamericaniron5767
9 ай бұрын
@@73DiamondReo Like the weather, I’ll tell you more about it after it’s done.😀
@NopeMcNoperson-v3i
9 ай бұрын
Alright, my suggestion? Rig up the trailer and both pieces of equipment so that you can put either the power washer or the air compressor on it according to which you need to cart around at the time. Maybe fashion a steel frame base for each device and drill all the bolt holes in the trailer and bases you'll need. If this isn't the dumbest thing you've read today, then I'm losing my touch. Anyway, keep making cool videos, man. See you on the next one.
@73DiamondReo
9 ай бұрын
thats definitely possible. thanks for your input
@daviddziomba9664
2 сағат бұрын
I would make your air compressor portable. Dave D.
@johndorazio3759
9 ай бұрын
There are around 45hp I believe
@73DiamondReo
9 ай бұрын
should be plenty
@richardcavalloro8355
9 ай бұрын
Wow, that engine runs great. Cant wait to see it installed. The clip at the end brought up a question. What kind of work do you do to the tracks and undercarriage of your equipment?
@73DiamondReo
9 ай бұрын
I really haven’t done much. Replaced some track pins is about it. The Lima 24 I want to repin the entire track. Do you have a machine that needs track work?
@richardcavalloro8355
9 ай бұрын
@73DiamondReo don't own anything yet but I love the old equipment. There's one on marketplace I've been eyeing though
@73DiamondReo
9 ай бұрын
@@richardcavalloro8355what is it?
@richardcavalloro8355
9 ай бұрын
@@73DiamondReo 1958 Bucyrus 22-b
@TCI425
9 ай бұрын
Engine sounds great. Put it in the 10B and make er sweat.
@73DiamondReo
9 ай бұрын
sounds like it would have a nice bark to it
@Jeremy-q3g
6 ай бұрын
Are you still using an air operated impact wrench? Guess you like your tools as antiques as well😂
@73DiamondReo
6 ай бұрын
All the time unfortunately
@petergardner2334
9 ай бұрын
id like to keep the original engine
@73DiamondReo
9 ай бұрын
might still be an option. parts are hard to come by but i need to really access its condition
Пікірлер: 55