Video corrections:
- None yet.
In this video I discuss the installation of the following parts:
- Rear Main Seal
- Oil Supply Tube to Turbos
- Front Flange and Crank Seal
- Upper and Lower Oil Pans
- Oil Pump and Tensioner
- Oil Level / Temp Sensor
- Oil Pressure Switch
- Engine Mount Brackets
- A/C Compressor Bracket
- Turbo Coolant Return Lines
Chapters and Part Numbers:
00:00 Intro
02:45 Rear Main Seal
Gasket 078103181C
Seal 078103171L
04:22 Oil Supply Tube to Turbos
O-Rings N90777301
07:00 Oil Pump and Tensioner
Tensioner 078115124
07:57 Front Flange and Crank Seal
Gasket 078115189H
Seal 20026412B
11:25 Upper Oil Pan
18:05 Oil Pan Tubes
O-Rings N90613201
20:00 Lower Oil Pan
22:45 Oil Level / Temp Sensor
23:11 Oil Pressure Switch
23:54 Turbo Coolant Return Lines
24:15 Engine Mount Brackets
24:58 A/C Compressor Bracket
25:20 Outro
More info on my 2001 Audi S4 project:
Audizine build thread:
www.audizine.com/forum/showth...
Oil Check Valves / Distribution Tube Servicing - 2.7T Audi
• Oil Check Valves / Dis...
Maxspeeding vs Audi OEM Rods - Balancing - Are the MS Rods balanced out of the box?
• Maxspeeding vs Audi OE...
Audi B5 S4 A4 Rear Control Arm Rebuild - Bushing Removal / Install and Powder Coating
• Audi B5 S4 A4 Rear Con...
Audi B5 S4 A4 Rear Diff Refresh - Powder Coat and Output Seals
• Audi B5 S4 A4 Rear Dif...
Audi B5 S4 Stage 3 K04 $10k+ Parts Haul - PB Garage 2.7T Build-Off Challenge
• Audi B5 S4 Stage 3 K04...
Audi B5 S4 2.7T K04 Engine Assembly
• Audi B5 S4 2.7T K04 En...
B5 2.7T 01E K04 Engine Pull and Build Specs:
• B5 2.7T 01E K04 Engine...
Негізгі бет Автокөліктер мен көлік құралдары Audi 2.7T Oil Pan / Pump / RMS / Front Crank Seal - Installation
Пікірлер: 85