Road salt have toasted my fenders and your video have given me inspiration to replacing them this summer. Thanks a lot from Norway.
@Geno_780
2 жыл бұрын
Just wanna say thank you for these helpful videos. I've saved $$$$$ watching them and working on my Audi in my driveway... THANKS!!!!!!!
@leighharron
2 жыл бұрын
Great video, you’re very clear and easy to follow, thanks for sharing this. I like your leaf trick too! 👍
@RlativityVSinscurity
Жыл бұрын
Great video, need to do this to mine just have to find the parts car. Can't believe how calm and chill you are in those tight spaces. Obviously a ton of experience. Thanks again man.
@aaronsatterfield4457
2 жыл бұрын
About to do this exact project. Thanks for the thorough tutorial man!
@deejay4837
Жыл бұрын
How'd it go??
@bryanhager1545
3 жыл бұрын
Don't want to see you hurt, throw you a tire under that thing or a jackstand. Thanks for all the content.
@abelvillalobos7852
2 жыл бұрын
The leaf trick is nice in a pinch! I usually use paper from a receipt.
@john1genius
2 жыл бұрын
Fairly straightforward,I know now what the job is worth!
@kingjim8583
Жыл бұрын
Thank you for all you do for us brother 🤛
@ryanstimets8143
3 жыл бұрын
If you put a performance clutch on a 6 speed manual trans in a 2011 Audi A4 will this allow the trans to handle more torque?
@robertziton8893
2 жыл бұрын
Any thoughts on getting that windshield washer reservoir removed on the driver side
@MadManPookie
3 жыл бұрын
Hey nap town happy 4th. I was always curious as to why these models have to be jacked up so high in the air before the tires actually come off the ground. Is it a failing part.
@LarLar74
2 жыл бұрын
Awesome video, man! Really helpful! :)
@stefanambams
2 жыл бұрын
Do you buy pre painted parts? Have a site you buy from? Thanks!
@tergo2479
2 жыл бұрын
I was cringing the entire time. Jacks aren't designed to hold weight over a period of time, only to lift. That's what jack stands are for. Other than that, super helpful. Thanks for posting.
@bradchristianson5134
3 жыл бұрын
Your a savage love your videos keep it up
@DarNico
3 жыл бұрын
Another good vid. Could you give the specs on those Koni shocks?
@steveslusser3814
3 жыл бұрын
Hello naptown tuner. Live your channel. I have a question. Is the 4.2 litre V8 Volkswagen from a Toureg a good engine? Thanks for all you videos
@ggangupherebadaraco6423
2 жыл бұрын
Where you get those clips for the fender line the first one you where putting
@NhatNguyen-xs7kl
Жыл бұрын
What are all the bolt and screws size needed to remove?
@casca6664
3 жыл бұрын
Do a vid on replacing heater/airconditiong flap motor mine center console ones are bad and I wanna see one done before I do it.
@robertziton8893
2 жыл бұрын
That was very helpful to get the right fender off. Thanks., but when you get to the left fender the windshield washer reservoir is in the fender blocking access to those last 2 screws in the door jamb. Any hints on how to get that reservoir out of there. I already removed the two visible screws?
@7hcfV
Жыл бұрын
you can just pull it out by pushing it towards the fender and towards yourself at the same time so it gets un-caught by the filling tube.
@rajm4547
Жыл бұрын
Great video
@EJR20
2 жыл бұрын
Hey man is the belly pan still available?
@vegetaisownage
2 жыл бұрын
Great video man, At the end of the video where you fixed the gap, Did you you just tighten the top screws? How did you do it?
@dayinthegrind688
2 жыл бұрын
I think he just shifted the positioning of the top screws by pushing them in
@Sugarkryptonite
2 жыл бұрын
Loosen the top screws, push the fender in by hand and start tightening the screws back up as you go along.
@OutwithK
2 жыл бұрын
Will this work for an Audi A5?
@yufanchen6072
Жыл бұрын
Will B9 be similar to this?
@chazdickerson2014
2 жыл бұрын
Is that a red s4 in the back ?
@bbjazzmanjazzman7721
Жыл бұрын
Always clean ALL the dirt and debris from the body working areas..dirt can easily cause bolt or screw cross threading and or stripping out..where there was factory weather caulking.. clean that away and apply fresh material.. sealant was applied there for a reason the QC saw in testing.. Black plastic Push pin clips are what is used in much of the plastic fender and splash guard areas in Nipponese mfg autos, it breaks away under less stress than the part it holds so it helps prevent rips and tears in plastic panels and similar parts as well..
@mrmanitoba
2 ай бұрын
I just did the drivers side More of a pain as you have to remove the washer reservoir
@stig5763
3 жыл бұрын
Hey brother, I have been having some weird rough starts. Misfires occurring for the first 5 seconds of warm up. Are my coil packs and plugs bad?
@westtexas501
3 жыл бұрын
Any short blocks for sale ?? 2011 audi A5 2.0t???🧐
@alexbaker7346
2 жыл бұрын
where did you order the fender at, and about how much was it?
@icyboy3535
3 ай бұрын
Did you find one?
@alextoma9785
11 ай бұрын
Best🎉
@johnyu4790
2 жыл бұрын
Yes KONI shocks 👍🏼
@aaronwashington3964
2 жыл бұрын
Hi this is Erin Cascade Maryland I like to see how you change a fuel pump B7 A4 Audi 2.0
@mobster2
3 жыл бұрын
Can you do a video on how to buy tires? I’ve heard the new Michelin AS4 are really good, but there like $1k. How do you buy tires?
@ryanstimets8143
3 жыл бұрын
Hey a little off topic but does anyone know how much hp a 2011 A4 transmission can reliably handle?
@vagcentral2252
3 жыл бұрын
8 speed auto b8.5 either 400/500tq. Manual b8 360 tq. If you have 6 speed probably around 350tq.
@ryanstimets8143
3 жыл бұрын
@@vagcentral2252 thank you much appreciated
@KushChroniic420
Жыл бұрын
2012 not in the title, different process or just typo?
@jdm_mike91_90
3 жыл бұрын
You from Annapolis?
@Order-in-Chaos
3 жыл бұрын
Do you think someone would survive with a huge confederate flag on a huge flag pole in front of their house in Annapolis?!
@robertziton8893
2 жыл бұрын
Just needed to remove the filler neck, then it came right out.
@qwl6iu
Жыл бұрын
U still have the parts car
@kirk4478
8 ай бұрын
What about the 2 T30's Behind the Fender Seal and the Plastic Pop Rivets That like Ya Know,,Actualy PUT the Fender Seal Back in Place?? Did this tonighy on My S5 on Drivers Side With the Water Bottle. What a Bitch to put it Back 100% Factory!! New Fender I Had to Rivet All the Mounts In that I had to Drill Out of the Old Fender. If it Wasnt A Perfect Condition 2012 S5 "Special Edition" I Would Push this Damn Car into a Lake🤟
Пікірлер: 52