Great stuff and sounds 👌🏼👌🏼 I fixed my cold start exhaust flap rattle... removed the flap actuator, removed the C spring and opened it up by a few millimetres, then refitted it....what this does is put some extra tension on the flap spindle and as a result the rattling stops 👍🏼
@jasonwalsh9211
2 жыл бұрын
What next is the burning question ? ... I've been considering colour coding the front seat backs to match the bodywork
@danielvorisek8362
Жыл бұрын
Best comparison I had seen so far for RS3
@fopply
3 жыл бұрын
Was thinking about to buy a milltek exhaust for my rs3.. and after this video i will buy one for sure! Great video & thanks for sharing it 😁
@frax77
3 жыл бұрын
Thanks buddy 🙏 You will loooove it 😁
@primer_rs
3 жыл бұрын
The exhaust rattle you get from these is actually from the turbo actuator mostly. It uses a vacuum based actuator rather than a boost varient. As a result under partial load you get that rattle where the wastegate is rattling.
@frax77
3 жыл бұрын
Ah yer, I've heard people refer to the dreaded wastegate rattle....probably explains why it still does it! 😆
@lizfriedrich9990
3 жыл бұрын
Great video again - well done! ...and I do love watching other people working!
@atrophytv6329
3 жыл бұрын
Amazing as usual! Thanks for the quality content 🔥
@mike786551
3 жыл бұрын
Awesome sound man!! I'm on the stock rs3 sport exhaust currently but this is tempting!
@brandonaitken1180
Жыл бұрын
All you need is non-resonated midpipe and a stage 1 tune.
@gandules06
3 жыл бұрын
Awesome sound! You've got me thinking hard about switching over! Great video!
@goldamurr2148
3 жыл бұрын
Omg! Perfection! xx
@MM-cr7dq
3 жыл бұрын
Great sounding system!
@EastWood2004
2 жыл бұрын
The sound is a dream! Unfortunately I can’t make the sound from 8Y model.
@alexander-malafeev
3 күн бұрын
Thanks for the video! How many decibels do you think you get approximately is from Milltek and OEM in launch mode?
@frax77
3 күн бұрын
Appreciate it....in terms of actual decibles, I really wouldn't know. It's definitely louder, but the real difference is higher in the rev range. 👍
@JoseHernandez-ef9zi
2 жыл бұрын
Brilliant video!
@garns8878
3 жыл бұрын
I own a golf r and this makes me want a rs3 saloon so bad
@frax77
3 жыл бұрын
Haha they're a great car...but so is the Golf R 👍😁
@matthewmatthew5978
3 жыл бұрын
Hi guys That is a really nice comparison! So thank you very much for it. Would you say that you have more downshift pops and bangs with the milltek inferno? 🥰 Greetings from Good old Germany
@frax77
3 жыл бұрын
Vielen Dank 🙏🙏🙏. I wouldn't say there was 'more' pops and bangs, but they are certainly louder than before. A down-pipe and a tune would definately give you more hehe
@SupercarSeany
2 жыл бұрын
@frax77 I am installing one of these on my tt-rs this weekend. Did you guys find that one of the harnesses was barely long enough to reach the motors after you moved them to the milltek?
@frax77
2 жыл бұрын
@SupercarSean no there was enough slack on the RS3 install 👍
@EastWood2004
2 жыл бұрын
Great video. So your rs3 didn’t have the opf? I have ordered an rs3 8Y which comes with opf. I want to know how to make best roar 5 cyl sound without ecu mapping.
@frax77
2 жыл бұрын
Mine didn't have OPF. I know there are options for OPF cars but I'm not sure if they require remapping. A simple cat back will at least get you on the right track 😊
@nabeelj7
3 жыл бұрын
Hi Mate This sound amazing and the neighbours won’t be annoyed too. I got 2020 RS3. Will the same upgrade will void my warranty? Thanks for assistance
@frax77
3 жыл бұрын
Thanks mate. It's best to check with your dealer but as it's only a cat back it shouldn't void your warranty. Good luck 👍
@OSKAR-ch7jk
2 жыл бұрын
Nice video but I think OEM Sound very good 👍,I got 2020 OPF and With Miltex will be Massive Different.
@milandombi5040
Ай бұрын
Full Decat?😊
@frax77
Ай бұрын
No, this is cat back, so retains the factory primary cat.
@ushittyuglylc5037
2 жыл бұрын
I want to modify my m3/Audi rs3. Can you recommend me? Thank you
@frax77
2 жыл бұрын
Start with a catback exhaust or a stage 1 tune. Video of my stage 1+ will be coming soon 👍
@ushittyuglylc5037
2 жыл бұрын
@@frax77 can't wait👍🏻👍🏻
@stevenbrown6366
3 жыл бұрын
Love the video! Well done and informative. So much that I just purchased the exact same for exhaust system for my 2018 Nardo RS3 as well. Have a 2 questions if you don't mind answering please. I did not get a wiring adapter for the valves in my kit, as described to be included when I ordered. Did you need to do anything with the valve wiring harness at all when installing the Milltek? I realize we reuse the OEM valves. Can't see why a wiring adapter would be needed however. Also do you reuse the chassis brace you removed to take off the OEM exhaust? Don't recall see it reinstalled in the video. Thanks in advance sir. Thanks again for sharing your experience and putting this nice video together for us.
@frax77
3 жыл бұрын
Thanks Steve, appreciate the positive feedback. Firstly, yes the chassis brace gets reused in its original position. Secondly, in terms of wiring you shouldn't need any adaptors or patch harnesses, you simply reuse all the factory valve motors and their existing wiring. Once you take the valve motors off the OEM exhaust and put them on the Milltek one, then they simply plug back in to the exisiting valve motor wiring on the car (once you've installed the new exhaust). Hope that helps. If you need more info or pics just DM me on facebook or instagram. 👍
@stevenbrown6366
3 жыл бұрын
@@frax77 That helps massively!! Thanks so much. I figured as much on the wiring harness. Might be required for a different car model perhaps. If using the same valves, makes sense it would connect to the car the same way. Reattaching the braces makes sense as well. Will be using exhaust paste as you gents did as well. Bet you're loving the car even more with richer tone. The car is simply perfect for me but it's nice to have great aftermarket support to sweeten it up a bit more. I'll be watching more of your videos for sure. Thanks again!
@frax77
3 жыл бұрын
Happy to help. More vids coming soon 😊
@simonprescott590
2 жыл бұрын
Lovely sound! But the Delta at 12:03 ❤️
@frax77
2 жыл бұрын
Haha yer, it has quite a story behind it. Will do a video on it one day. 👍
@simonprescott590
2 жыл бұрын
@@frax77 sounds great! Is it an intregale?
@frax77
2 жыл бұрын
Yer, Integrale Evo
@HashBrown99Gaming
2 жыл бұрын
Just to clarify, this catback exhaust means the CAT is still there but there's no muffler/resonator etc right?? Im looking for a new exhaust but I wanna keep the cat in case the car gets inspected and I've also heard removing the cat causes the car to stink.
@frax77
2 жыл бұрын
Yes that's correct. The cat is in the dump pipe. The cat back system is literally just from base of the dump pipe back.
@stormtropper88
2 жыл бұрын
So the car just has the miltek exhaust on and that’s it?
@frax77
2 жыл бұрын
The only other addition is the IE intake....otherwise it was mechanically stock at the time of filming.
@stormtropper88
2 жыл бұрын
@@frax77 nice that bitch sounds awesome
@stealthhtm23
3 жыл бұрын
great vid! it sounds awesome!! what wheels does Brian have on his car?!
@frax77
3 жыл бұрын
Cheers mate. Bryan runs Koya SF11 in their Onyx colour (like a dark gunmetal). They look pretty sweet 👌
@stealthhtm23
3 жыл бұрын
@@frax77 yours are much nicer, but too rich for my blood lol
@DHODN
3 жыл бұрын
Sounds nearly the same on video. How is the difference in real life? Milltek or Bull X
@frax77
3 жыл бұрын
I haven't heard a Bull X to be able to compare. I would say the Milltek is 30% louder than stock, just at a rough estimate.
@domturbocharged7660
3 жыл бұрын
Hey man! I was on the fence with this exhaust but after this video i’m sold!🔥 how is the highway drone for the cabin since this car would be my daily, also when I called to order this they said that the valves on the miltek come already assembled, do I use the stock ones and still unscrew them on my stock exhaust? Thanks!
@frax77
3 жыл бұрын
Highway drone is fine for me. For really long trips I just close the valves. The valves are assembled, you just need to transfer the motors from the stock system to the new one. You will love it man 😁👍
@frax77
3 жыл бұрын
@@domturbocharged7660 that's it! It will all make sense once it's lying in front of you. Best of luck. Let me know how you go 😊
@domturbocharged7660
3 жыл бұрын
@@frax77 yes thank you also do you have any pictures of what the hangers are supposed to look like? When you say to flip them over what do you mean?
@frax77
3 жыл бұрын
@@domturbocharged7660 msg my thru IG or FB and I'll send you thise pics. 👍
@domturbocharged7660
3 жыл бұрын
@@frax77 awesome just messaged you!
@job5908
3 жыл бұрын
What made you go with milltek? I’m looking at awe track exhaust too. Thanks.
@frax77
3 жыл бұрын
There are heaps of options which can make it a bit confussing. For me it came down to a simple design and good pricing. Oh and the exhaust tips....I was originally thinking of IE, but not a fan of their tips.
@job5908
3 жыл бұрын
Thanks for the video I ordered the same catback! Did you bring the OEM catback home? I don’t think it will fit inside the car.
@frax77
3 жыл бұрын
@@job5908 congratulations! Yes, I brought the OEM exhaust home and hung it on my wall (watch my video of the Swisstrax garage floor install and you'll see it). But, I used a friends truck to go grab it a few days later. You might be able to fit it in the car but you'd want to wrap it up well to avoid damage to seats and centre consoles. 😊
@gettipsie
3 жыл бұрын
Lovely Frax,sounds amazing man! What average fuel consumption do you get when driving dynamic and comfort? PS great job!
@frax77
3 жыл бұрын
I think you might be the first person to ask about my fuel economy 😊 To be honest mate I never really look, but I'm happy to do a comparison and let you know. Spoiler alert, I have a heavy foot 😆
@gettipsie
3 жыл бұрын
@@frax77 Haha,i love the fact u have a heavy foot so keep pushing it and keep up the great work. I will hear from you. Thanks in advance.
@gettipsie
3 жыл бұрын
@@frax77 Please try a comparison in dynamic and comfort. Thanks mate.
@samvalinouri3502
3 жыл бұрын
Hey mate, loved the video, may I ask where you got your exhaust from??
@frax77
3 жыл бұрын
Performance Crate. Tell Xen I sent you...awesome guy to deal with 👍 (info in description)
@tallroc
3 жыл бұрын
So I’m guessing it didn’t throw a code ??? Good explanation to about cabin noise. I’m wondering if to trade up from a pfl but it sounds mint and some people wreck the noise of fl ie. zututu
@frax77
3 жыл бұрын
Nah no codes thrown. Generally speaking the PFL are much louder with more pops and bangs. Us FL boys keep trying to be as noisey as the PFL crowd lol
@tallroc
3 жыл бұрын
Well keep up the good content can’t wait for your downpipe results
@derrickgarcia303
3 жыл бұрын
How loud is it inside the car? And does it have any drone on the highway? Thanks
@frax77
3 жыл бұрын
The cabin on the RS3 is really well insulated so it's pretty quiet inside. In terms of drone, it's minimal. As you pass by roughly 2500rpm the harmonics increase a bit but personally I don't find it offensive. Keep in mind that as it retains the valves, you can just pop it in to comfort for long drives. 👍
@dustinkrew5513
3 жыл бұрын
Sounds good ! Is the milltek all you have done for exhaust work? Looks in the video that you had no secondary catalytic converter‘s just befor the down pipe ?
@frax77
3 жыл бұрын
Thanks mate. Yes, the Milltek is all that's done at the moment. The FL RS3 with the performance exhaust doesn't come with secondary cats... well not here in Oz anyway. 😊
@dustinkrew5513
3 жыл бұрын
@@frax77 no problem! And I guess the cars come different for countries. I just got my milltek cat back in the mail yesterday so I’m going to get it putt on today
@frax77
3 жыл бұрын
@@dustinkrew5513 very exciting. You will love it 👍
@dustinkrew5513
3 жыл бұрын
@@frax77 definitely and I waited four months to get it !
@frax77
3 жыл бұрын
Haha me to.... thanks Covid 🤦
@spariola
2 жыл бұрын
Hi , go your car have OPF ?
@frax77
2 жыл бұрын
No, mine is pre OPF.
@natusvincere1844
2 жыл бұрын
Hi im a french guy, there is a real difference beetween before and after ? it really worth the investment ?! thanks
@frax77
2 жыл бұрын
There is a significant difference between stock and the Milltek. Keep in mind that this is the non-resonated version. Go for it mate, you won't be disappointed.
@natusvincere1844
2 жыл бұрын
@@frax77 thx for your opinion. With th RS exhaust (OEM) you dont have second cat, is it true ?
@frax77
2 жыл бұрын
Yes that is correct. Just the primary.
@devodunne4997
3 жыл бұрын
You know that when you start the car you have to out it manual again in dynamic to open the waves
@frax77
3 жыл бұрын
I run a CETE controller which keeps the valves where I set them (as well as drive mode and auto stop/start setting)....but yes you're right, this is the case for those without some form of override controller.
@AudiTTRS
3 жыл бұрын
Hello !! I got same one. YEAHHHH!!! THE SOUND IS AMAZING,right ? :-)
@frax77
3 жыл бұрын
I'm loving it man 😄
@matthewmatthew5978
3 жыл бұрын
So you both are sattisfied yes? 😁 i am actually looking for an aftermarket System too
@frax77
3 жыл бұрын
@@matthewmatthew5978 still loving it 😁👍
@kevinweaver8187
2 жыл бұрын
What headlights are those?
@frax77
2 жыл бұрын
At that stage they were just factory with a slight tint wrap on them.
@afourie4625
3 жыл бұрын
Is this an OPF model rs3?
@frax77
3 жыл бұрын
My RS3 is a 2017, so non OPF.
@TheMrdeashawn
2 жыл бұрын
rs3 with opf or not?
@frax77
2 жыл бұрын
Not 😄
@Kevin_MK7RSR
2 жыл бұрын
God that sounds good. Any other mods like intake, Tune, etc. ? Thanks.
@frax77
2 жыл бұрын
At the time of filming just an intake. Car is now tuned as well....video coming soon 😁👍
@Kevin_MK7RSR
2 жыл бұрын
@@frax77 Thank you 👍🏻 Sorry one more question, not sure if I missed it, but did you do the down pipe, and if so, is it de-catted?
@frax77
2 жыл бұрын
Just a cat back. Downpipe is still standard.
@Kevin_MK7RSR
2 жыл бұрын
@@frax77 Ahhh, ok thanks. That is surprisingly LOUD for just a cat-back. My Golf R is getting TTRS DAZA swapped and I have a 3.5" cat'ed downpipe going into a 3" X-Force Exhaust + Open intake, intercooler, Stg 2 tune, and I'm trying to estimate what mine will sound like based off your video (Very helpful, love the OEM Vs. Modded) soooo, should be pretty frikin' loud 😅. Here is one of the build episodes here on KZitem : kzitem.info/news/bejne/lW5usp53gmqKZII
@tev_seven6008
3 жыл бұрын
Hey mate how did you get your front lights flashing ?
@frax77
3 жыл бұрын
Oh they aren't flashing mate, it's just the way the camera picks up LED light....something to do with shutter speed versus frequency of the lights. 😊
@donyu84
8 ай бұрын
Hi ! May I know is stock car ? I mean no remap ? Thanks
@frax77
8 ай бұрын
At the time of the video, it was stock, yes.
@donyu84
8 ай бұрын
@@frax77 thanks and it was impressive but did you said is not much different if you are driving ?
@frax77
8 ай бұрын
In terms of performance, it's not a huge change, no.
@donyu84
8 ай бұрын
@@frax77 I mean the sound from inside the car 😅 can’t hear much different? Thanks
@frax77
8 ай бұрын
Ah yes, the cabin is very well insulated so if your windows are shut it only sounds a little louder. BUT, outside the car sounds amazing 😄
Пікірлер: 116