Great video. Nice and detailed. I have heard that the occupancy sensor can be coded out on vcds but nobody has actually documented the process. Is this even possible on vcds?
@TinoR626
6 ай бұрын
You can code it out with vcds but the light will be on, as it will have codes for the airbags being turned off.
@xav____
Жыл бұрын
The Recaro seat looks great !!
@ChampagneS3
Жыл бұрын
Thank you. It's super comfortable too!
@neilaneilaneila
Жыл бұрын
My 2017, Golf R seat, assembly weight turned out to be 54 pounds. In my case, I am replacing it with a Racequip fiberglass with Sparco sliders and brackets, which totaled 37 pounds for a difference of 17 lbs. Admittedly, not nearly as much as I expected, but weight savings nonetheless. Yours is probably pretty similar. You have a more functional seat, so there may be a pound or so difference but that’s about it I would guess.
@shangeetibodo2496
11 ай бұрын
very nice and detailed thanks
@cjlewis5455
2 ай бұрын
Hey, what are the resisters called please ? I'm getting Sparco R100 seats fitted but haven't been able to source the resisters I'll need to avoid warning lights. Also what are the jumper cables as I can't seem to find them either. Im in the UK / Scotland, Thanks
@ChampagneS3
2 ай бұрын
They are just generic resisters you can find at any local electronics store. As for the jumper cables I found them on amazon
@ChampagneS3
2 ай бұрын
Just search 3 pin female to female jumper wire or cable
@cjlewis5455
2 ай бұрын
@@ChampagneS3 excellent thanks
@alessiocentritto
2 ай бұрын
sooo good :)
@wiscopyro
2 ай бұрын
But it doesn't get rid of the seat belt light, so you get to hear the warning thing continuously while driving.
@ChampagneS3
2 ай бұрын
Seatbelt light? If you don't have it buckled it whole chime.. Just like regular operation. But there is jot seatbelt light warning as you are using the original belt and buckle
@wiscopyro
2 ай бұрын
@@ChampagneS3 Unless the seat belt is Bluetooth connected to the computer, how would the computer know if you unplug all of those wires?
@ChampagneS3
2 ай бұрын
@@wiscopyro if you watch the video the seatbelt occupancy sensor is still plugged in. You will not get any light, I drive the car like this with no lights or warnings which is the reason I made the video to show it
@wiscopyro
2 ай бұрын
@@ChampagneS3 Ok, thanks
@neilaneilaneila
Жыл бұрын
Good timing, I’m probably doing mine this weekend, already got the same parts off Amazon. Did you get the weight difference? I’ll try and remember to weigh mine and post it here. The R and S3 should be pretty much the same. I’ve got the sparco base, brackets and sliders with a Racequip fiberglass seat.
@ChampagneS3
Жыл бұрын
Man I should have weighed mine! I totally forgot! Let me know how they work out. Looking forward to your progress this season 👌👌
@stefano5892
11 ай бұрын
Hi, I didn't understand from the video if you removed the presence sensor on the seat and where from? Could you explain to me? Thanks and congratulations for the video and result!
@ChampagneS3
5 ай бұрын
Sorry for getting back to you so late. You'll need to remove an occupancy sensor if you decide to put both driver and passenger seat into the car. If you're doing just the driver seat you will not need a occupancy sensory
@ArkECSGO
Жыл бұрын
Hey bro i installed recaro cs in my golf mk6 and i adapted the airbags(not ressistors) with good results, but im getting airbag light for 2 erros, seat occupied passenger sensor and drivers position sensor. Do i need 100% ocr sensor mat from a stock seat or could i jump it?🙏
@ChampagneS3
Жыл бұрын
You need to have the seat position sensor moved to the new seat which is attached to th belt buckle. Did you install 2 seats or just 1?
@ArkECSGO
Жыл бұрын
@@ChampagneS3 i installed two seats driver and front passenger
Пікірлер: 23