🙏🙏🙏🙏🙏🙏💯💯💯💯💯, thanks for the detail, most people just run over it, and never dig into the details
@brucecustommotors
3 жыл бұрын
My pleasure, yeh we have to help each other out🔥🔥💯💯
@dennis17116
Жыл бұрын
Best video I’ve seen on KZitem. Excellent work!
@brucecustommotors
Жыл бұрын
Thanks 🙏
@elevatedcustoms8515
3 жыл бұрын
Man you've helped me so much , with my build , thanks bro truly, you're really appreciated!!!!!
@brucecustommotors
3 жыл бұрын
🙏🙏🙏💯💯💯💯💯one team one dream
@elevatedcustoms8515
3 жыл бұрын
@@brucecustommotors thanks bro
@Beardchanics
3 жыл бұрын
Great tutorial as usual man. Engine bay going to look even better with this part on. Stock one are really not pretty!
@brucecustommotors
3 жыл бұрын
Yes definitely 💪💪💪💪💪💪💯💯💯
@morpheus232001
3 жыл бұрын
Unloosen = Tighten Great vid. Those intakes are expensive 😫
@brucecustommotors
3 жыл бұрын
lol yeh, sometimes a upgrade for oem is necessary, and not too expensive
@onaiwugt9037
3 жыл бұрын
You make it look so easy..., maybe I can get there one day. Great vid and appreciate your dedication.
@brucecustommotors
3 жыл бұрын
lol, I have my fair share of cuts
@soldriving
3 жыл бұрын
Wow, another great video and a lot of work. Thanks BCM.
@brucecustommotors
3 жыл бұрын
My pleasure, and thanks for all your great inspiring Audi and Car content
@TrillMk6
Жыл бұрын
I have a Mk6 Gti Going Stage 1 With IE With A IE Intake And a CTS Turbo Back Exhaust What should I work on getting next ? Any ideas. Love your videos sick build and very informational 🔥
@DerAlterMann
29 күн бұрын
Thanks for this vid, helped me a lot in the removal. I'm just stuck at the connectors at 9:14, whatever I do I can't get them off. What's the trick?
@jamesforrest234
3 жыл бұрын
Did you disconnect the battery for this .? Did you need to take the fuse out of the fuel pump fuse ? Can you show?
@brucecustommotors
3 жыл бұрын
I just disconnected the battery, because every time the door opens are car is illuminated, the car fuel injector will prime and squirt out a little fuel
@DaytonaGrey-RS5
3 жыл бұрын
Loved this video! I am watching all your videos this weekend. I have a 08 TT fwd, with some mods. Mods are GIAC Tune, Neuspeed cold-air intake, Becker axle back exhaust, R8 Ignition coils, replaced the cam follower/screws/gaskets, and some more. I want to add more power/reliability to my car. I love my car and have 130k miles on it. I have done these mods in past year and am getting more and more confidence in working on engine. Where should I go to keep my car running smooth and gaining power? Intercooler? IE intake manifold/ exhaust? I would love to hear your opinion. I love the sound of your car. I ordered a Unitronic downpipes and sent it back bc I was told I couldn't pass a emissions test unless I went with unitronic stage 2. I think I want to stay with GIAC but am open to your suggestions. How did you get your car to sound that amazing? Thanks in advance!
@brucecustommotors
3 жыл бұрын
Main your car sounds awesome, inter cooler definitely can get your air cooler and give you more power intake manifold is a plus giac is a good tune, the power curves are a little different from apr and ie, but the all are about the same, Check out my CT’s down pipe video, I do a walk they of the exhaust
@brucecustommotors
3 жыл бұрын
And thanks for the love and support
@waynejordan7473
3 жыл бұрын
Hey Bruce . I’m getting an Audi A4 Quattro delivered on Monday . Do you know of any tunes for the stock motor . I’m trying to get about 275 bhp on the stock setup . I have another vehicle with a k04 and a custom tune getting over 300whp but I’m not familiar with Audi platforms. I got the a4 with relatively low mileage . About 37,000 miles and it’s being financed but I do plan on keeping it because I like the k04 turbos . And don’t want a crazy amount of boost but I do want to be able to get that throttle response and power . Any help Is appreciated and great job with the vids.subscribed to you too brother
@brucecustommotors
3 жыл бұрын
Here’s a few ideas. kzitem.info/news/bejne/qImgnWqFfKuIn4I kzitem.info/news/bejne/q42YuqqCf4Wbppw kzitem.info/news/bejne/tYyjrJOajqFeeX4
@ayoubwajdi9351
9 ай бұрын
Awesome video bro
@chrisk6573
2 жыл бұрын
Hey Bruce dying to see street tests of the new IE intake and tune. I cant seem to find that in your library. Have you made that yet?
@72defender
3 жыл бұрын
Another gem bro! Question: Are you switching to an IE tune from an APR tune?
@brucecustommotors
3 жыл бұрын
Thanks Brother, im going to do a comparison video soon, and put out part 2 in a day or so, to see, hoe it feels , and yes , as long as you have your serial code, you can always switch back, you just have to pay the apr service fee
@72defender
3 жыл бұрын
@@brucecustommotors Gotcha! I’m looking to mimic exactly what you did here. The weird thing is, the tuning shop I go to one of the guys there told me IE tune not designed for APR K 04. I was like “huh...”I’ve never heard anything like that before...” The turbo is not proprietary to APR so I can get any tune. I think he meant it may not give same results. Either way, my intake manifold is not working properly and I refuse to buy an OEM one. I’ll wait to see what you come back and report in Part 2. Thanks again! 🙏
@michaelschmidt9561
2 жыл бұрын
How to program new manifold ECU ?
@nerdsnerdic3653
Жыл бұрын
Bruce! How much hp can you add with an ie intake manifold? On stock ko3 turbo audi a4 b7 stage 2+ is it worth the money,? Or buy a bigger turbo? Bigger turbo plus intake manifold would be optimal I think but if you have to choose.
@R3MILI
3 жыл бұрын
Codes for intake manifold P1018 P3135 My intake manifold in A6 2007 2.7 is bad . My car consume 10 liter in 30km city , and 7 lit in 100 km highway . Does it consume so much becouse the intake manifold ?
@brucecustommotors
3 жыл бұрын
yes
@R3MILI
3 жыл бұрын
@@brucecustommotors hello , i didchange the manifold set but still my car dont has acceleration and consume fuel like before , i thought maybe the problem is in this throttle body , what do you say ? kzitem.info/news/bejne/0WOLtoR7e56bqGU
@rhondaross8475
6 ай бұрын
What is the cost for this type of repair?
@davidvcds1685
3 жыл бұрын
How do you like the Wagner intercooler? I’m trying to decide between the Wagner and the IE one
@brucecustommotors
3 жыл бұрын
Have both , same numbers
@davidvcds1685
3 жыл бұрын
@@brucecustommotors gotcha
@Hoolibumbum
2 жыл бұрын
Great video. Question: Did you break the connector for the injector that stayed stuck inside?
@brucecustommotors
2 жыл бұрын
No but I bought a repair kit anyway for new seals
@Hoolibumbum
2 жыл бұрын
Bruce Custom Motors got you. I meant the plastic electrical connector though. I’ll be doing this tomorrow and I’ll be cleaning the valves. Q5 2.0
@blvdjae7433
3 жыл бұрын
would this manifold increase stock hp without tune ?
@brucecustommotors
3 жыл бұрын
yes
@DevinJohnson.
3 жыл бұрын
What’s your 0-60 at? And this is on stock internals right?
@brucecustommotors
3 жыл бұрын
Yes and 3.8
@DevinJohnson.
3 жыл бұрын
@@brucecustommotors damnnnn no shit. Kept reading online about stock block power handling and everyones saying rods are good till about 350 so thats amazing. Lookin at gettin a b8 so this is some good motivation haha. Btw already subscribed and watched a bunch of your videos all of them are hella thorough i love it big ups my guy keep it up
@silverstacker5174
2 жыл бұрын
That water pump plug is giving me headaches. I can't get it off.
@deevee6203
2 жыл бұрын
Can you hook up a catch can to the stock pcv valve ?
@brucecustommotors
2 жыл бұрын
yes
@TheDiamondLadder
8 ай бұрын
@@brucecustommotorshow?
@Rgunt8905
Жыл бұрын
You turned that audi into something JDM. Smh what an insult.
@MrLove-vi4dj
2 жыл бұрын
I wonder has Bruce ever had a knock sensor problem ⚠️?
@jamesmacpheators7222
3 жыл бұрын
Currently stuck on unplugging those fucking 3 plugs. The electronics one(the biggest one) is being a stubborn piece of shit! My thumb is raw from trying to pull this thing out. Pull out game is weak. Haha
@brucecustommotors
3 жыл бұрын
Lol did you finally get it, or you got a baby
@jamesmacpheators7222
3 жыл бұрын
@@brucecustommotors brooo! I'm stuck. That part that your car doesn't have, it's stuck in mine. The bottom nut (10 triple square) is stripped and I can't get this bitch out. I really don't want to take it to a shop since everything else was pretty damn easy. This is basically at the end of taking it out too.
@Veersa
3 жыл бұрын
Where did you get that little breather for the oil catch can? I have the same one
@brucecustommotors
3 жыл бұрын
I added it to release crankcase pressure to avoid oil leaks www.ebay.com/itm/25MM-Oil-Mini-Breather-Cold-Air-Filter-Fuel-Crankcase-Engine-Filter-US-/234017935717?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@grantbradley5084
3 жыл бұрын
That IE manifold is a great addition to your motor. That plastic intake manifold detracts from the beauty of the motor. I’m so glad I had that manifold installed on my Avant. Not only does it look great the added performance and lack of turbo lag is definitely worth the investment.
@brucecustommotors
3 жыл бұрын
Yes brother you actually leaned me into , getting it
@grantbradley5084
3 жыл бұрын
@@brucecustommotors glad to hear, your going to love it!
@BlaizeB8
8 ай бұрын
Hey I was just wondering if you knew the hp gain? And I was also wondering if you needed to tune your car after you put the manifold on?
@OmegaSupremeWCheese
3 жыл бұрын
Love the videos Bruce! Thanks for all uploads it's been a huge help to a new audi owner.
@brucecustommotors
3 жыл бұрын
My pleasure, god bless bro💯💯💯💯
@luckytech1645
3 жыл бұрын
Great vid! I appreciate your channel but I can't lie sometimes my favorite part of the vid is your car in slow motion switching to the music at the end.
@brucecustommotors
3 жыл бұрын
🙏🙏🙏🙏💪💪🙏🙏
@bidz5963
Жыл бұрын
dont need to remove Intake manifold to replace the waterpump done it without doing so just a little harder to reach things is all
@frankwhite8413
3 жыл бұрын
What does cold start injector mean on the Audi a5 2.0T???
@brucecustommotors
3 жыл бұрын
there cold start which is when you start your car, when it has been off long enough to be cold, and fuel injector, which specifically were you speaking of
@frankwhite8413
3 жыл бұрын
@@brucecustommotors it might be the fuel injector, should I order the s3 ones?
@brucecustommotors
3 жыл бұрын
@@frankwhite8413 might swell they have potential for more, power and are almost identical to our factory ones
@frankwhite8413
3 жыл бұрын
@@brucecustommotors thanks Bruce...
@Idunno195
2 жыл бұрын
How much horsepower did you gain from this?
@MrRojas-iq9cu
Жыл бұрын
ohhh damn i didnt think the IE would work because of mine being plastic intake manifold
@princesadollah5748
3 жыл бұрын
What year is your Audi A5? And do you have any advice for someone that’s getting ready buy one I’ve only owned 350z and 370zs trucks but I just seen a5 for first time and fell in love with it
@brucecustommotors
3 жыл бұрын
check out my play list kzitem.info/news/bejne/0Ixom2agmqt3dG0
@customcars5628
3 жыл бұрын
BRO, THIS VIDEO IS AMAZING, IVE BEEN WANTING TO REMOVE MY INTAKE MANIFOLD , AND A SHOP WAS GOING TO CHARGE ME 800, I'M CONFIDENT I CAN DO IT MYSELF KNOW!!!!! LOYAL SUB SCRIBER!!!!!
@brucecustommotors
3 жыл бұрын
My pleasure bro, here for anything you need
@gclucky365
3 жыл бұрын
Can't wait to see part 2. One day I'll have the courage to dig deep into the engine.
@brucecustommotors
3 жыл бұрын
It’s coming asap
@elevatedcustoms8515
3 жыл бұрын
@@brucecustommotors second that
@72defender
3 жыл бұрын
Bro, what are your thoughts on the Loba K04? Seems like those things can make some good power numbers.
@brucecustommotors
3 жыл бұрын
haven't used it personally, but I think its a growing company
@KaiThouKing
10 ай бұрын
Okay where is Part 2
@cam9sec
3 жыл бұрын
Now I'm going to have to buy one
@brucecustommotors
3 жыл бұрын
It’s worth it, also if you wanted to do a food cleaning or run flap delete, the same process applies
@Eah2019
3 жыл бұрын
Yup definitely subscribed I have an Audi A5 I’m thinking doing mods on
@brucecustommotors
3 жыл бұрын
🙏🙏🔥🔥🔥🔥🔥🔥🔥🔥🔥
@eddyserif9847
3 жыл бұрын
I bought used intake just like yours but didn't came with hardware, do you know if someone is selling just hardware
@brucecustommotors
3 жыл бұрын
Here it is but you can go to Home Depot and source it’s yourself performancebyie.com/products/ie-intake-manifold-install-kit-2-0t-tsi-ea888-gen-1-2-longitudinal
@eddyserif9847
3 жыл бұрын
Thank you so much, I would just need to figure out the bolts size they go thru the intake to head , THANKS AGAIM
@kushalagarwal6271
3 жыл бұрын
Do you know how to change the power steering fluid in these cars i try to put a hose down there and suck it all out but i can only get a inch in there because of the filter
@brucecustommotors
3 жыл бұрын
I’ll do a video
@kushalagarwal6271
3 жыл бұрын
@@brucecustommotors thanks man
@tuwhelzreally741
2 жыл бұрын
love your video, just got me a 13 adui a6 2.0t. what you buy to make the bov sound. please help me
@brucecustommotors
2 жыл бұрын
kzitem.info/news/bejne/zmyZ0mlssJd9dHY
@braxtonhamby9658
3 жыл бұрын
What’s the best ko4 to go with in your opinion and what about iE ko4?
@brucecustommotors
3 жыл бұрын
apr /ie/ cts all the same
@Elmauritrader
Жыл бұрын
Is done for Q3 2.0t
@jonboy194
3 жыл бұрын
your videos keep getting better.. great stuff!!
@brucecustommotors
3 жыл бұрын
Thanks brother, appreciate the support 🙏🙏🙏💪💪💪💪💪💪💪
@bootneylee9802
3 жыл бұрын
So far so good. 👍
@brucecustommotors
3 жыл бұрын
😅😅😅😅😅💯💯💯💯💯🔥🔥👌💪💪
@vladimirmacko1481
3 жыл бұрын
is part 2 on its way?
@brucecustommotors
3 жыл бұрын
here you go brother kzitem.info/news/bejne/xKWq1a18oIWVlmk
Пікірлер: 104