After a LOT of research I may have found a semi-permanent to possibly longer term fix for the "Video Cable for Image Processing
C1107 02 [009] - Signal Failure" code we are all having.
This is applicable to Audi A6/A7 (C7 & C7.5), Q5, Q7, Volkswagen Touareg, Porsche Cayenne (possibly Macan as well) and maybe more.
This method would have not been possible without the video by @rossmanngroup made many years ago explaining the chip heating process.
I strongly recommend watching it prior to carrying out this repair at your own risks.
• Reballing flip chip GP...
As mentionned in the video please make sure to do the following FIRST prior to messing with your camera:
1-SCAN YOUR CAR AND GET YOUR ERROR CODES!
2-check your fuses (A7 & A11 on driver side fusebox)
3- Test cable continuity with a multimeter from the camera(J852) to the imaging module(J851) under the passenger side carpet.
4- If cable is not bad, proceed with the work explained in my video at your own risk.
This was a quick video I made in order to test the theory. Please excuse the poor video edit and some improper terms I may have said during this video. Documenting and explaining all of this was a very last minute decision.
Join the conversation on Audizine here :
rb.gy/wbl9d
Негізгі бет Audi/VW ACC, Lane assist: No camera vision Free fix! (code C1107)
No video
Пікірлер: 122