I absolutely love all things adaptive. Used to use adaptive learning and therapy when I worked as a music psychologist. I even use that on myself. I know the names of all the keys on my synthesizer. But I don't want to have to think about it so I put the name of every key on the home screen of my phone so it's sinking in subconsciously. Every time I open my phone I see the keys and I always have it on sitting in front of me when I'm playing. Thank you for the fantastic video have a good day soon sir.
@billyyoder8171
5 жыл бұрын
Thank you Curtis. Good job. I appreciate your videos. Merry Christmas to you and your family.
@cruzflores6981
2 жыл бұрын
Do you have any video on Isuzu DPF Regeneration procedure w/ MS906BT?
@jhackme
4 жыл бұрын
good video Curtis but why wasn't the tablet used on it`s internet side to retrieve the update file for the trans module that's why the newer unit IE. the maxi sys élite with j2523 bought ?
@AutelConsultancy
4 жыл бұрын
Hi Jack. Many people have a misconseption that you can program ( get the manufactuers calibration file) from the tablet. This is not true ( The only 2 manufacturers that can do this is bmw and mercedes) The rest of the vehicles you need a laptop and OEM subcription with the j3534
@jhackme
4 жыл бұрын
@@AutelConsultancy thank you Curtis.. I was sure of that your a gentleman for your response; your filling the void .On the cutting edge of the need your filling iam a 30 yr tech master ASE certified also have my bachelor in CTE. career technology education thank you in advance many blessed days Vince AKA >>>> jack
@Marrs6696
Жыл бұрын
If I buy a tcm on eBay for my ford focus. If they program to my vin# will it work?
@theguy6199
5 жыл бұрын
Curtis, please define in detail what the term 'coding' means as it relates to using scanner devices on autos. The term 'coding' seems to have emerged on the scene over past 8 years or so...prior to that, we called what I think is now being referred to as 'coding' as 'programming' or 're-programming' of electronic modules with new updated operating software, typically to address issues and problems that have been identified as software related. Back when I was working on cars (now retired) we would 're-program' a PCM or TCM for various sundry driveability issues...and very rarely 'reprogram' a body system module... and that was it. So. I'm interested in exactly what is being referred to as 'coding' by techs in the field today...I assume that it means more than just retrieving and analysing and erasing body/chassis and powertrain module codes.
@kamsornthan5985
5 жыл бұрын
You should make autel scan tool that diagnoses the problem and show location and pictures of the part needed to be changed.just a thought just a thought.
@sorryimajerk735
3 жыл бұрын
so you mean a robot? like completley take all skill and talent out of the technician? give your head a shake
@hamradiostation_M0UGE
2 жыл бұрын
Does this need to be done if you are only changing fluid and filter ?
@omarbarreh6586
4 жыл бұрын
Hello Curtis. is the same thing for GM Chevrolet Cruze. My Mecanic having issue using his Maxisystem Pro telling me after changing new TCU with solenoid replace he try to relearn the transmission the scanner finishing the program.
@marktirabassi7160
3 жыл бұрын
Hi , I was just curious how you got to be where you are today ? Did u go to college or a trade school to learn about software first.? We're u a garage mechanic like me ? I'm a little shy if I can learn this. ? But TKS for the great video ?
@AutelConsultancy
3 жыл бұрын
HI Mark , Great question. I have no formal education. I really just been good with computers in general so it was easy for me to make the transition into cars. ( thats what they basically are today .. computers on wheels) But the words of encouragement I can tell you , is that if you done 1 thing for at least for years.. you will be perceived as an expert in that field. Ive been doing this for 12 years so I learned a lot. Dont be afraid .. imagine if I was afraid to go into this field.. i would be were I am today
@marktirabassi7160
3 жыл бұрын
@@AutelConsultancy TKS for a speedy reply , I'm seriously thinking about getting a scanner . Good to know u can answer questions well. That's been half the battle in this auto field . I'm retired from postal service . Mechanic 32 years . But will work on cars on the side maybe. TKS . Don't know who to like more ? You or scanner damned . ;)
@Todd-W
2 жыл бұрын
can this be done on a 6l80e simply to reset the adaptive learning without changing parts?
@rugo841
5 жыл бұрын
Great video . im about to buy the elite. Thanks😀
@AutelConsultancy
5 жыл бұрын
Great. Would love to be able to represent you. Take care
@mrdman094081
2 жыл бұрын
👍👍👍
@eulalioaguilar1658
5 жыл бұрын
Good morning Curtis, I have the maxi pro elite and am having a hard time with a Honda Civic 2015. I replaced the srs module and airbags and now need to recalibrate the system but can not finalize the process. I read two permanent dtcs and when prompted to clear them even though it reads that they have been cleared once I start the car again they return. Please help.
@HERBYWALLACE3
4 жыл бұрын
Question, can this until reset the transmission mileage counter after a fluid flush. Let me know thanks
@victorme6678
2 жыл бұрын
I want to get one
@SinotaphMusic
4 жыл бұрын
Thank you Curtis. I just want to know if can do the following: BMW Programming, BMW Coding, DME and CAS ISN, Key Programming, BMW Ecu Programming, coding, Ecu Swapping, CAS Replacemnts, VIN changes, Ecu Cloning/Tuning, BDM Functions for BMW CAS4, Porsche BCM,... And Used keys reset as well as in all other cas?
@AutelConsultancy
4 жыл бұрын
HI Mzamo.. The autel do some of these functions your requested. However you might need a speciliazed tool to execute the other functions like ecu cloning , Porchse BCM used keys reset and etc. If you would like me to educate you on which tools that will execute this you should book a consultation with me at www.autel.setmore.com and click the diagnostic tool consultation
@mahmoudhantouli5434
5 жыл бұрын
Maxisys 908P and I keep this tool up to date every year and I was contacted to online even it's miss up the CAS system Hope to hear from you soon
@AutelConsultancy
5 жыл бұрын
I personally havent had that issue before but It just might it could be multiple number of things.. It could be software related.. It could be the component that was replaced isnt matched properly.. You are going to have to ask your rep to conduct a data logging and walk with you through the process to see what the problem could be. Maybe trying using the dedicated OEM BMW software with the j2534. This way you will be able to go do to the source and get the files through them.
@mahmoudhantouli5434
5 жыл бұрын
See this is what's happening God come to us Runnin with no problem only what's her bump we did change it and I offer the customer to do updates if it is available and he agreed I hook up the scan tool online with the car and battery maintainer from Snap-on medal off session the tool ask to shut the ignition off I did that after that no communication Anyway
@AutelConsultancy
5 жыл бұрын
@@mahmoudhantouli5434 Hey Mahmoud ..in the future .. Never program an ECU module if the service manual does not instruct you to do so. It could possibly result in "bricking" the ECU. ( I know this because when I do programming on other OEMS with the j2534 they warn about doing this) I have the same philosophy with the updates on the Maxisys . Sometime when you update ( when you dont need to) you will find that the newer software is not as stable as the previous version ( it may have glitches). Next time only update the ECU if its a brand new module and if the OEM instructs you to program it .
@1fnjo790
5 жыл бұрын
@@mahmoudhantouli5434 , God come to us runnin with no problem only what's her bump we change it? I think her bump was Baby Jesus and all was calm , all was right until you tried to reprogram the manger with 3rd party programming flash files downloaded from some Chinese Web site:-))
@1fnjo790
5 жыл бұрын
Maybe the Ying and the Yang got crossed with the Alpha and Omega.
@jhonacevedo821
Жыл бұрын
I am trying to change my TCM module in a 2013 ford focus, I try to learn it but when the drum passes it gives me an ERR. in red x that has been interrupted. My old TCM went through calibration so I know I'm doing it right, do I need to do anything additional to the new module before I retrofit it?
@AutelConsultancy
Жыл бұрын
Does the USED TCM have the same tear tag information as the original?
@jhonacevedo821
Жыл бұрын
@@AutelConsultancy My faulty module is K00 and the module that I bought used is K05. Before buying it, let me know and if it is compatible from the 2012-2018 models
@AutelConsultancy
Жыл бұрын
@@jhonacevedo821 Its imperative to have the exact tear tag information. If its different your going to have problems like this because the hardware levels are different.
@jhonacevedo821
Жыл бұрын
I understand the two modules that I have are from different hardware, but I have seen videos that change k00 to k05 tomorrow I will make one last try with tips that I have been able to collect anything I will tell you how it went
@AutelConsultancy
Жыл бұрын
@@jhonacevedo821 Ok no problem. Let me know if you can get it to work. I never have any luck when the tear tag is different. If it was an older car you might be able to get a away with it .
@angelbarajas1551
5 жыл бұрын
what battery maintainer do you recommend & i already have the maxisys, would u be able to set up a laptop. & how much would you charge
@1fnjo790
5 жыл бұрын
On a budget and always aware to keep unit dry indoors out of rain you can get by using an IOTA DLS 90. I don't care for how it will sparks at the battery terminal when attaching it's negative cables at the battery terminal , but try to first touch the negative cable clamp to a good ground away from the battery to discharge the capacitors of the maintainer before attaching the negative clamp to the battery
@1fnjo790
5 жыл бұрын
An IOTA DLS 90 is a low cost Maintainer I get by fine with , but you need to be careful to keep it from getting wet and out of the elements. Seems to always generate a spark when attaching maintainer to battery clamps, so first I attach positive clamp of maintainer ,next I touch the charger negative cable clamp to a decent ground away from the battery twice to discharge the internal Capacitors before attaching the negative clamp to the Negative battery terminal to avoid spark.
@dashtyATG
3 жыл бұрын
Hy Chris I'm just about to buy the same 1 from a friend of mine he's gotbit in chaina as i heard you saying stick to the American made! with only 7 month left update. Is it ok to buy and can i register it on my name how can i work with you if i get it from elsewhere?
@AutelConsultancy
3 жыл бұрын
Hi Dashty, Of your located in the USA then I said its good to get a tool from a USA supplier so you can get USA support . If you purchase a tool from usa and ship it to your region , the tool might get blocked. You can book a diagnostic tool consultation with me each time you need support (97USD) or if I sell you the tool directly then I can offer support for the tool for life.
@dashtyATG
3 жыл бұрын
@@AutelConsultancy ok I'll get back to you if o buy any other tools as I've IM508 so far it's been working perfectly in iraq I've made so much money with it. I'm planning to jump up to some other better tools and I've already learned a lot from you. Thank you very much.
@MWalsh_NY
5 жыл бұрын
Does this work for a used TCM?
@AutelConsultancy
5 жыл бұрын
Yes.. but it depends on the year make and model.
@tomalokas8564
3 жыл бұрын
Can we do tcm programming with ms908
@jaxmismo2862
4 жыл бұрын
I have autel im608,,, my problem is cannot do programming and relearning TCM PCM and PSCM ,, of Ford Fiesta,,, my country is in Philippines
@uuzx0
2 жыл бұрын
How to adapt CAS4 without dflash and pflash
@SinotaphMusic
4 жыл бұрын
And Used keys reset as well as in all other cars?
@Joelelmacizoful
5 жыл бұрын
Hello, I bid and won a maxisys elite on eBay for only $1140 and I was wondering if I should register right away or should I wait a couples of months?
@AutelConsultancy
5 жыл бұрын
Dude.. are you sure thats a new unit? Anyhow you are only allowed to do 9 diagnostics then you have to register the unit .
@Joelelmacizoful
5 жыл бұрын
Yes, amazingly I won a brand new one for $1112 plus $27.97 shipping. I just registered and I have 2 years of updates and 2 years warranty. I really want to learn how to use it. I subscribed to your channel to watch more videos and learn more about how to use it. Thanks for your fast reply.
@1fnjo790
5 жыл бұрын
@@Joelelmacizoful , Wow Nice Score. I thought I got a great deal on a used nearly new MaxiSys Pro 2 years ago for $1500 from a distressed shop with most of it's update period remaining . I had to buy an expensive update to repair a firmware issue back in February . I just did my first sucessful BMW reflash programming and coding updates on all the available modules that had one on a 2011 BMW 328I just for the H@ll of trying . I'm really surprised Autel doesn't show a diagram prompting you to use the USB cable between the tablet and VCI necessary to do the programming. I have almost 6 months of updates still and want to sell it off while it's still worth something and the buyer can get USA support and transfer registration ,and re download all the car software again if it needs to be reset or develops an issue .
@rabidc0d3r25
3 жыл бұрын
Can I use the MaxiCheck MX808 for this procedure?
@AutelConsultancy
3 жыл бұрын
I cant be sure unless I check by VIN with the engineer. But I dont think it is.. but i could be wrong. If you really want to know you can go to my website www.auteltech.co.za and click the diagnostic tool consultation. Thanks
@victorme6678
2 жыл бұрын
How much is the Autel jbox?
@AutelConsultancy
2 жыл бұрын
It depends on ware you get it from and I wouldn't just purchase it as there are other jboxes that are better
@automaniacUSA
3 жыл бұрын
I'll buy an autel from you. I need a scanner that can do tcm relearn on subaru
@AutelConsultancy
3 жыл бұрын
There multiple options, I would suggest booking a consultation so I can show you with tool is right for you.
@AliSalman
5 жыл бұрын
Could you please advise me on which cheaper Autel could make quick learn for dodge TCM 2018 8 speed
@AutelConsultancy
5 жыл бұрын
I havent done a proper diagnosis on your situation so I cant gaurantee the tool im recommending is going to solve your problem. At minimum I recommend the MS906BT. If you go any lower than that model your probably waisting your money
@BehzadEghtesad
2 жыл бұрын
I re learn my ford focus 2012 transmission with Autel but it made it worst ! no my car dose not drive anymore! DONT USE AUTEL FOR FORD FOCUS
@jamesshadrick7235
4 жыл бұрын
Called again no luck??????
@AutelConsultancy
4 жыл бұрын
Hey James, Go to my website site auteltech.co.za to book a consult with me. Ill be able to serve you better there.
@mahmoudhantouli5434
5 жыл бұрын
Hi dear friends it is very good to but don't take it wrong when it's coming to work on BMW coding or Reprogramming not worth a penny
@AutelConsultancy
5 жыл бұрын
Hi Mahmoud. No offense taken. It really just depends on your personal requirments . As long as my clients are giving me good testimonials on the programming thats all I care about. Which tool are you using to do the programming?
@jamesbarratt593
3 жыл бұрын
Having faith in people. That sounds like a bible expression, and when was that written. Look at the world. People. People are fault.
@JoseAlvarez-kw4sd
5 жыл бұрын
My dear,you speak to much just go to do how and that is it
@AutelConsultancy
5 жыл бұрын
HI Jose.. You can skip to the section where you find useful. I need to give people the oppurtunity to understand what services I render and I want to show people how complex the tool is and how I am able to help the client address these issues.
@mofixcars6002
Жыл бұрын
❤
@jaxmismo2862
4 жыл бұрын
I have autel im608,,, my problem is cannot do programming and relearning TCM PCM and PSCM ,, of Ford Fiesta,,, my country is in Philippines
@AutelConsultancy
4 жыл бұрын
Its possible though. I have a client who does remote programming to customers in your country.
Пікірлер