Very helpful. I knew about about the autopivot but not that it could be height adjusted.
@janomehqjanomecanada4908
3 жыл бұрын
Yay! Thank you sew much!
@raggedyanna6-Missy
Жыл бұрын
Which foot did you use for the appliqué please
@cynthiafiekers2120
2 жыл бұрын
Can I adjust the pressure foot tension while sewing? I sew rope and the pressure foot tension has a tendency to “warp” the rope? I have an S7
@janomehqjanomecanada4908
2 жыл бұрын
Yes, in the settings mode, you will be able to adjust the foot height for pivoting and the pressure of the presser foot. Page 90 of your instruction manual has more detailed information. Happy Sewing!
@amystogsdill2083
Жыл бұрын
Hello, sorry to bother you but had a question. I came across your video which is amazing. I have the Janome MC 8200QC and when I am sewing my zipper tabs onto my zippers after it goes over thickness of the zipper it doesn’t come back down tight to the thin layers of fabric. So it kind of makes squiggle lines. How do I get it to adjust from the thick to thin? Thank you so much
@amystogsdill2083
Жыл бұрын
Looks like the pressure foot lever is loose, not sure how to fix this? Thank you
@janomehqjanomecanada4908
Жыл бұрын
Hi Amy! The presser foot will adjust to the different layers when it's truly flat and straight. You can adjust the presser foot pressure to further accommodate and customize the thickness. Happy Sewing!
@cathierobb8712
2 жыл бұрын
Is there an auto pivot on mc6700p
@janomehqjanomecanada4908
2 жыл бұрын
HI Cathie! No, the MC6700P has a manual presser foot lift, though use of the knee lifter to raise the presser foot is almost like auto-lift, lol!
@bernadettefoden9609
3 жыл бұрын
Hi can you use auto pivot on the janome memory craft 8900 qcp?
@janomehqjanomecanada4908
3 жыл бұрын
HI Bernadette, the MC8900 does not have an auto-pivot feature, but you can select to needle down to stay in the fabric, and use the knee lifter to raise the presser foot, so that's achieving the same result as auto-pivot
@twinstar9
3 жыл бұрын
Where is the auto pivot function on a 9400
@janomehqjanomecanada4908
3 жыл бұрын
it's the first icon on the screen - a presser foot with needle - when it's highlighted in yellow the auto-pivot is active
@twinstar9
3 жыл бұрын
@@janomehqjanomecanada4908 If would be so great if we could see the screen on the machine closer. Thank you.
@janomehqjanomecanada4908
3 жыл бұрын
@@twinstar9 thanks for the feedback. I can't get too close because of lighting and the strobe-like effects viewing the screen through a lens, lol! but I think this is pretty close so everyone can see which buttons I'm selecting.
Пікірлер: 17