I can clearly see the potential of this program. thanks for creating this video!
@jasonderby7635
9 ай бұрын
you definitely have your finger on the pulse when it comes to Arch technology. Many firms will be adopting this next year.
@ima9641ne
6 ай бұрын
Thanks you a lot cause I am a last year student in ecological architecture field and those days I really needed a way to show how my envelope interact with environnement and nature . I WILL USE IT definitely
@user-ze2ki7jq7c
Жыл бұрын
Hello Balkan. This is really cool. I should no longer use Maps and AutoCAD for these purposes. 😀
@icecube15
Жыл бұрын
I followed the steps , its really add great value.
@LaurenceMehlhorn
9 ай бұрын
This is good to visualize potential of a site..location..And there be able to create the floor layout in Revit..and on a final note the model can be then added to Lumion or twin motion to add a fly through of the area and add vehicles ect..as a selling factor and proposal tool for the city permit..another words it is good for permit or Zoning presentation to the city.. once approved by the city engineering..Very good to visualize site potential.
@thehealthyepicures946
10 ай бұрын
this is mind-blowing! Please more videos on the theme!
@mohammedibrahim2960
5 ай бұрын
thanks a lot really loved your explanation, and I will be using FORMA for my proposal in internship.
@jobenlozano3338
27 күн бұрын
thank you
@interior-Yutopia
11 ай бұрын
It is an interesting enough program. However, there are still many shortcomings. Since buildings are not raised on the topography, it seems to be working against sunlight analysis and energy efficiency management.
@hagentrondheim3675
7 ай бұрын
very interesting , thank you. Is it possible to import the site borderlines from a dwg siteplan ?
@andrimarbjarnason2348
11 ай бұрын
Nice tutorial, but can you show us how you get the roads to show in Revit? You can see the in Forma but they don´t come in to Revit
@edoardoalegiani
5 ай бұрын
hello i saw your video and it's great, i was wondering if you could do one where you start from a proposal of Autodesk Forma and go to working in detail on Revit. thank you
@marisasugangga3035
Жыл бұрын
Thank you for this cool tutorial!
@chilombe
Күн бұрын
Can you run all possible tasks in Forma for "free" (inclusive of your AEC subcription); or do some tasks incurr an added fee? I only ask because the tutorial mentions "ordering" items for "free", which implies that "ordering" some other items might not be free.
@mocha-6957
Жыл бұрын
You are my king
@fredschriever8806
5 ай бұрын
Thanks very much. Do you have a much more detailed video on the detailed use of the 3D Sketch option ? Thank you.
@alvarobiglia4746
9 ай бұрын
es un software increíble para la planificación
@prettyboychuks3368
7 ай бұрын
youre too blessed
@ClaudioFrusteri
Жыл бұрын
Super Fantastico, ormai sei un riferimento assoluto in materia! Grazie🔝🏆🏆🏆🍻
@3dMistri
11 ай бұрын
CAD Mapper is a great tool for bringing map to any 3d software like Sketchup, Rhino, Autocad with layers and we can further design it inside our software. Forma force you to stick to autodesk software only.
@mahsanm1268
11 ай бұрын
Thanks. The error that occurs results in not importing the roads. Is there a solution for it?
@octavioenriquellanoslizcan5381
10 ай бұрын
Hi, thanks for the vid, is it possible to analyze a 1km x 1km region?
@eastudio-K
Ай бұрын
I this a better option than using infraworks?
@SohaibAtia
9 ай бұрын
Great video! However, i feel like this is like a more simple version of infraworks
@mihaigheorghiu2048
8 ай бұрын
I actually thought this is gonna be some AI stuff similar to Testfit. It doesn't really look like that. Yet. The (only) REAL benefit here seems to be the topo. Surrounding buildings are a 'nice to have' for now, as they are yet to be coordinated with the topo and that pretty much invalidates some analysis :)
@shaktivelio3553
7 ай бұрын
Can you copy paste in FORMA and how did you select per level to change the function?
@kal9th
Жыл бұрын
Thanks teacher handsome😊
@victormackenzie1222
Жыл бұрын
Wow, bravo 👏 🙌
@sanjana_learning
8 ай бұрын
Can we import data in the form of 3dm or skp into forma?
@hawthorn3499
Жыл бұрын
Hello Balkan does your balkan architects site have Dunamo tutorial videos ???
@harry1975ist
9 ай бұрын
Hi Balkan ..is this same as Formits?? ..cheers!!!
@proektsochi
Жыл бұрын
Great videos. And now, taking into account the departure of Revit, we are only looking))))))😮💨
@pavillon9365
Жыл бұрын
How the streets were exported?
@davidtosin509
Жыл бұрын
Thank you for this vid, I have a question, can we model our building from rev it and import in to forma?
@MrSamuelmacalister
Жыл бұрын
yes - export as an obj or IFC and bring in via the Forma library. There is an option to sync back revit data, but you need to duplicate your forma proposals so it doesn't overwrite it
@febrianoanthonio9221
10 ай бұрын
How to rotate obj imported file?
@jakengland1
Жыл бұрын
Hello >>>> thank you for you tutorials >>>> I've a question>>>> how we can Model a curved shape has vertical and horizontal curve in REVIT?
@MrSamuelmacalister
Жыл бұрын
There is a sketch design feature in Forma where you can do splines and curves based on the FormIT engine. There is also a new Rhino beta workflow in the extensions
@jakengland1
Жыл бұрын
@@MrSamuelmacalister Can you show me the procedure by recording a video? thanks
@FreeKiLLuminati
Жыл бұрын
Wow this forma is very nice but I've made a student account and it's finished the year or two can't remember But why the building is not attached to the ground correctly?
@balkanarchitect
Жыл бұрын
I think that the software is just overlaying the building data over the elevated surface data, it would be really hard to automatically fit all buildings perfectly.
@MrSamuelmacalister
Жыл бұрын
you can edit the site to flatten it to the correct msal@@balkanarchitect
@ArbaForma
Жыл бұрын
@@balkanarchitect it is possible to move each building up and down to specify how they should meet the ground if you "release to basic building". You will then be able to access each part of the building and if you slightly drag-move it, then it will fall/jump to the terrain without moving it sideways. You can also use the move tool to move the building in the z direction
@itsdw2323
Жыл бұрын
If it’s free, it’s wonderful.
@MrSamuelmacalister
Жыл бұрын
its included in the AEC collections
@santiagojaviergarciamanso491
7 ай бұрын
£192 monthly
@omidpoorsaleh
Жыл бұрын
❤❤❤❤
@PedroPfrompembs
Жыл бұрын
Do you know if this is accessible for Students?
@balkanarchitect
Жыл бұрын
I'm not sure, if you have a student license you can try. If you do, please let me know. I'm interested in this too!
@henryglennon3864
Жыл бұрын
I fail to see why this is a separate product from Revit, except for the fact that it doesn't look like the software was built on top of AutoDesk's garbage proprietary 3D engine. If you could actually reliably free model and snap to objects in 3D in Revit, this product wouldn't need to be.
@AussieBIMGuru
Жыл бұрын
Autodesk has claimed that Forma will expand to encompass and replace Revit in time. I'll see it to believe it of course, but they arent building major changes on Revit intentionally now, it's coming into maintenance mode I think - not end of life but end of meaningful change.
@henryglennon3864
Жыл бұрын
@@AussieBIMGuru have they released a timeline for when this junk will become a full BIM modelling system? Because right now it's a bad version of TwinMotion combined with a bad version of Ecotect circa 2010
@HeiseSays
Жыл бұрын
@@henryglennon3864 I swear there was a product just like this years ago. I remember using it to mass up and test a stadium design and then import it into Revit. (I can't remember the name)
@MrSamuelmacalister
Жыл бұрын
revit is 25 years old now, so we are developing the next gen BIM. It will take some time though :)
@henryglennon3864
Жыл бұрын
@@MrSamuelmacalister what have you idiots been doing for the past 25 years, then? Anything other than collecting rent and doing the bare, bare minimum to update your products. ArchiCAD is even older than Revit, but it didn't take them years of delays to release the ability to measure and reliability snap to objects in 3d. There are programmers making more credible BIM plugins for Blender than this.
@Gaborsk1
Жыл бұрын
Hello Balkan Architect I don't know how to create a new hub. Do you care to show that?
@tarikinfo7716
Жыл бұрын
Thanks for this astuces.... Is this service free???
@Dammocless
Жыл бұрын
Nothing is free my friend read my comment above
@MrSamuelmacalister
Жыл бұрын
Its part of AEC Collections on subscription
@MediaCreators
Жыл бұрын
Looks like Giraffe in 2020.
@AussieBIMGuru
Жыл бұрын
Basically what spacemaker was, so you're not far off!
@HeiseSays
Жыл бұрын
This is just AUTODESK PROJECT VASARI.
@MrSamuelmacalister
Жыл бұрын
haha - great observation. Not quite the same engine, but similar principals
Пікірлер: 66