@Sudha Sethi How old are you? because u look like 8 years old and ur already enthusiastic about aviation hopefully you become a good pilot
@Rohitkumar-um3tc
5 жыл бұрын
me
@CaptShami
5 жыл бұрын
Washik what a coincidence I am just starting up X-Plane
@airbus7378
5 жыл бұрын
Does X plane mobile count?
@OrionFH
5 жыл бұрын
airbus 737 no
@prasanthtadiparthy4896
5 жыл бұрын
Expecting More Videos in the 737 NG FFS in future .
@rickyrickardo8218
5 жыл бұрын
wow, whats name of your hair stylist))
@SaturnusLead
4 жыл бұрын
Vanilla Ice
@FlyWithRookie
3 жыл бұрын
💀
@brahimbaaboura7054
Жыл бұрын
Baa-integrality LicenSEAR Cpl ATPL LicenSEAR-Bel
@chrippaaa
5 жыл бұрын
Hi guys, nice video. Your sim is missing the flap speeds on the speedtape. In the real aircraft, once you select for example flap 15 a green "15" will appear next to the minimum speed for flap 15. My guess is that perhaps you don't have the grossweight programmed. Another tip if you are interested, normally flap 40 would be used in a cat 2/3 as the angle of the aircraft with 40 compared to 30 gives is more steep and therefore you are more likely to see something at minimums :) Also, flap 10 is a "drag"flap and will never be used in level flight unless you are trying to loose speed, see how the thrustlever moves up when you select it? More thrust=fuel burn :)
@uncleoky
5 жыл бұрын
Thanks for explanations. And what about their final heading? Is it a preperation for go arround or what?
@chrippaaa
5 жыл бұрын
uncleoky normally we put the inbound heading/runway heading. Lnav should arm automatically in case of a go-around 🙂
@aymericsuze2450
5 жыл бұрын
Please match your heading bug !
@kevinkall8547
3 жыл бұрын
How is this autoland when it needs pilots to set flaps and put down the gears?
@michaelmitiszek1538
5 жыл бұрын
Shouldn't you always try to touchdown with minimum landing speed? How often do you use flaps 40 or is it not possible when doing an autoland with autoflare?
@Sim737Pilot
3 жыл бұрын
In the FMS on the INIT REF page, you select the flaps you will be landing with depending on conditions, rwy, ect. As shown, the standard flaps 30 was selected and a corresponding VREF speed is shown next to the flap 30 settings. The VREF speed is then bugged on the tape and normally add +5kts to account for minor oscillations as you never want to be below VREF spd for your landing weight and flap setting.
@coltongerth8444
5 жыл бұрын
Finally, compare 737ng to a320
@aljaz182
5 жыл бұрын
Is my impression correct in that the F/O is pilot flying and captain pilot monitoring? The decision to continue after passing minimums falls on to captain, sure, but why does the captain take over the controls? I would think changing who is pilot flying at a critical phase like flare would cause more confusion than necessary. I don't want to sound smart, because honestly I don't know. I'm jsut looking for an explanation and hence why I'm asking.
@NinjoMCS
5 жыл бұрын
Aljaz Prislan 👽
@RoRailSystems
5 жыл бұрын
In real life for precision approaches, most airlines tend to put the captain in charge with the landing so the first officer will be the Pilot Monitor just to avoid confusion during this critical phase of the flight.
@chrippaaa
5 жыл бұрын
The reasoning is, the captain is PM to be able to look out for visual cues. The FO's task is to monitor the instruments and in case of any deviation initiate a go-around. Some airlines do it like this and some leave it to the captain to be PF. Both ways have it's pro's and cons, changing controls at this low of an altitude might seem strange but like I wrote it has the benefit of giving the captain the capacity to look outside. Hope that explains it for you :)
@Sim737Pilot
3 жыл бұрын
@@RoRailSystems It's the other way around. The Captain is ultimately responsible so he makes the call whether to continue or go around. The only way he can do this is being PM for CAT II, and CAT III approaches.
@Toyotale.
5 жыл бұрын
about time you upgraded from the 737 classic to NG
@TakeDeadAim
5 жыл бұрын
In what ridiculous world does the PM take over from the PF at decision height? Anyone who actually flies knows that you get a feel for how the aircraft is responding to current conditions and gets a feel for how to anticipate control inputs based on those conditions. For the PM to all of the sudden then take over at the critical height is an absurd and potentially dangerous practice. There are no "pro's" to it. You either have confidence in the first officer to fly the entire approach/landing or the Capt will decide he will fly it. The ONLY reason the PM should suddenly take control is in emergency and then in that case he's going missed.
@TakeDeadAim
5 жыл бұрын
THIS is exactly the sort of dangerous practice which comes from people who spend too much time trying to fix things which are broken and get WAY to comfy in the sterile environs of full motion sims. Go fly the line or even suggest this and see the reaction you get. Just wholly impractical in the real world where most FO's are fully qualified and fully proficient and sometimes even a better "stick" than the Capt. He/She either flies the entire leg or they don't.
@NeTfLeXr6s
5 жыл бұрын
You got that it was an autoland right? The only thing the PM took over from the PF is the trhust levers which were on autothrust during the entire approach. After touchdown the PF (former PM) will disengage the AP and manually keep the aircraft centered. On a "normal" CAT I/II ILS Approach either the Captain or the FO will commence the entire approach. NOT during an autoland.
@twkster1
5 жыл бұрын
You should "park the attitude". I have flown jet aircraft of various types from small business jets to the B747 over a period of 40 + years. One thing I have learned during this time is that various airlines and credible organizations introduce changes to SOPs based on causes of previous accidents. Each Airline I have flown for (3) had some differences in their SOPs, and most had some level of credibility in their reasons. In this case, there are many advocates in the Flight Safety Industry who promote the switch over at "Landing Commit Point" as discussed here. THE SINGLE LARGEST CAUSE OF LANDING ACCIDENTS IS A FAILURE TO "GO-AROUND" in a timely way - if at all! SO - the difference in this SOP style is that Flying Pilot is pre-loaded to 'GO - AROUND" and only if the Monitoring Pilot Sees the proper cues and the aircraft is in a Position to Land - then that Pilot takes control and lands the aircraft with a "Positive Handover". Having said that, every company I have worked for still used the Flying Pilot Lands the aircraft, but there are many credible airlines doing it this other way - and it has some very positive reviews in the Flight Safety Industry. The ADVANTAGE to this style besides the philosophy of 'EVERY APPROACH IS A GO - AROUND " unless interrupted by a landing, is that there is no need to look up from the instruments at DA and acquire the Runway Environment and "DECIDE" during an Approach To Minima.... In this case the Pilot Monitoring is already looking outside and has acquired the runway and analyzed "Position To Land" saving critical seconds and increasing safety margins. Just because something is different from what you have been taught or exposed to previously does NOT make it wrong. Cheers
@GiddeonFox
5 жыл бұрын
What was the loud alarm noise that sounded right at touchdown? Is that normal?
@jchang133
5 жыл бұрын
that is the Autopilot disconnect sound. That is somewhat normal.
@geoffeg
5 жыл бұрын
Request for you: You're unable to reduce power to climb thrust after takeoff. Both engines stay at takeoff/flex power and do not respond to throttles, either manually or via auto-throttles.
@ПетрКоваленко-в1ц
Жыл бұрын
Well, a/t system have the possibility to be manually decrease after passing 800 feet in ARM mode
@CaptShami
5 жыл бұрын
Congrats on your new NG
@domantasjakaitis6176
5 жыл бұрын
Finally a NG
@stevenrojas8251
5 жыл бұрын
It was time that you upgraded your flight sim
@ajpineno9113
4 жыл бұрын
Why didn’t you get a max 8, the next gen is the older one
@tomstravels520
4 жыл бұрын
Because as we found out after the accidents....there are very few Max simulators going around because supposedly pilots wouldn’t need them
@kramerkramer7465
5 жыл бұрын
A very good instrumental landing .
@captaina330
5 жыл бұрын
VIVEEEE Pranas Drulis
@AlexAugustinex
3 жыл бұрын
I'm running to xplane11 to try this out myself...
@pbr2805
3 жыл бұрын
Can I have the classic simulator being that you don't need it anymore?
@DJGaryHubbard
5 жыл бұрын
Your right your procedures are not 100% accurate
@callejarvholm
2 жыл бұрын
I miss Pranas
@krikorm3355
3 жыл бұрын
Sorry guys, but your instructors have NO idea of B737 procedures and why the B737 behaves the way it does, and they are teaching you crap!
@Sim737Pilot
3 жыл бұрын
The video aligns with my operator's FCOM manual. What errors did you notice?
@Degnemla
4 жыл бұрын
This is not visi00 is it?
@Ziadcoolable
5 жыл бұрын
Finally you guys got the NG
@TheGarlicMan
5 жыл бұрын
They put the gear down far too early for my liking.
@Sim737Pilot
3 жыл бұрын
Several operators FCOM manuals state this is when to put the gear down. However, other operators may wait until around 4nm out.
@vikeshp
5 жыл бұрын
Trims for flare not a go around
@jayashrishobna
3 жыл бұрын
it's for both, according to mentour pilot
@НовиСадСрбија
5 жыл бұрын
Dusan Pavlovic my serbian brother 😀
@dusanpavlovic7195
5 жыл бұрын
Yes I am...
@НовиСадСрбија
5 жыл бұрын
@@dusanpavlovic7195 да ми је један овакав симулатор код куће... Откуд ти у литванији? Лепа је то прича
@emirhankandemir2149
3 жыл бұрын
fail passive explanation is wrong.
@gabrielprates8385
3 жыл бұрын
It is very short and basic but not wrong. Indeed a 737 with fail passive does not engage the rollout mode
@emirhankandemir2149
3 жыл бұрын
@@gabrielprates8385 yeah i misunderstood
@IrishManJT
5 жыл бұрын
Nice.
@deborshikashyap6745
5 жыл бұрын
Boeing cockpit looks very weird😰
@andersongeorge4653
5 жыл бұрын
*HAHAHHA SO U ARE A AIRBUSLOVER* ?!
@deborshikashyap6745
5 жыл бұрын
+Anderson Danice are u AIRBUS LOVER
@deborshikashyap6745
5 жыл бұрын
+Anderson Danice yes i m
@odidiharjo1230
5 жыл бұрын
Its vintage
@henryrugg4971
5 жыл бұрын
If it ain't Boeing I ain't going
@pauliuspetrauskas9688
5 жыл бұрын
Awesome!
@timothy.niklas
5 жыл бұрын
Why Taxi light? xD
@everettrailfan
4 жыл бұрын
Why not?
@koolmoin92
5 жыл бұрын
A question Isnt it's suppose to be SINGLE CH on the FMA when the VOR/LOC is captured and then change to CMD when flare arms after the self test indicating that the 2nd autopilot is now connected to the flight controls? And the why not set the missed approach heading on VOR/LOC capture?
@NinjoMCS
5 жыл бұрын
Foster101 fuck no wtf
@koolmoin92
5 жыл бұрын
What's WTF in this, if you think other wise care to explain?
@ramind10001
5 жыл бұрын
Foster101 I have to say no. CMD, means the autopilot computer is engaged, it is show during the whole flight. And after activating APP, single ch appears indicating only one autopilot is engaged, now you can also engage the other one, then it either shows LAND 3, or some other type of configuration you’re using.
@koolmoin92
5 жыл бұрын
@@ramind10001 yea but that Land 3(in fail operational) or CMD (in fail passive) comes only after the self test and when flare arms, before that it's SINGLE CH (after LOC capture) even if the 2nd autopilot button is pressed( coz the 2nd autopilot is still not connected to the flight controls). But in the video it's different.
@ramind10001
5 жыл бұрын
Foster101 NO, see CMD, is shown both for fail passive and operational aircraft, Land 3 is unique to fail operational, and is show when the second autopilot is engaged and after the test. I’ll send you a pic from the sim :)
@johnathanwetherill456
5 жыл бұрын
I'm going to say becasue the guy has his stripes that he might know a little bit more than all the keyboard experts commenting below . Xplane 11 does not make you a pilot .
@Sim737Pilot
3 жыл бұрын
But it makes you more of a pilot than MSFS2020 ;-)
@aldev6381
5 жыл бұрын
No need to allign the heading selector with runway heading once the localizer is captured?
@danielwals6251
5 жыл бұрын
Yes that's true.
@mbmedia916
5 жыл бұрын
its normal to do so and I do when landing, they may have either forgot about the heading or the standard missed turns to the heading selected incase of a go around
@Sim737Pilot
3 жыл бұрын
No it is not. The reason pilots (mainly the Pilot Monitoring) keeps the heading updated is good CRM- crew resource management, as if ATC vectors you earlier than you expect and your heading is way off, you don't want to arm HDG SEL and have the aircraft initiate a turn in the wrong direction.
Пікірлер: 97