Tech Tip Tuesday is always so informative and interesting content. Thanks Doug 😀👏🔥👍🙏💯
@gwbuilder5779
2 жыл бұрын
Excellent tip Doug.👌 I will add that the same applies to the differentials. Most people think that the vent line is just for keeping water out, but if you put a catch can with a return, you can be sure the differentials have the proper levels as well.🤙
@Knackersjewels
2 жыл бұрын
That's a great idea, I've actually been having issues with a diff puking out the breather, even at the correct level. Time to get me an overflow bottle
@jimmesser5821
2 жыл бұрын
Good stuff!!!!!!! Keep them coming!!!!!
@jamesaikens
2 жыл бұрын
Nice work! I'd like to see a tech video on adding a 1BAR to my crankcase. Where to tap for it, and what would the readings mean in the logs. A good follow-up to that would be coolant pressure (where to place the sensor), and then a backpressure sensor and how to decode that data in your logs.
@invertedpolarity6890
2 жыл бұрын
I don’t race my car but I performed a trans fluid flush on my 2017 Camaro SS. I believed that a dealership flush was done but was unsure. Glad I did it myself as the level was 2 quarts low which would happen if you don’t check the fluid level properly.
@TheLastTater
2 жыл бұрын
Great info! Thanks for the support!
@JohnRoberts71
2 жыл бұрын
Great content thanks for sharing, very informative
@robinwendt5527
2 жыл бұрын
i love that doug and everyone @ motion likes to see nt only customers but other racers do good. just another reason I buy boxes of stuff with the dum dums in the box!
@youknow-kp6zd
2 жыл бұрын
U guys make me won't to get bk into car's again I had the badass rides uz to race the mountain in NZ lol
@NickelWhiteS550
2 жыл бұрын
That’s why I left my pan off after I installed my lock in dip stick to check where the true full mark is on my th400.
@Uglyducklyracing
Жыл бұрын
Any videos of how and where is best to install like how it is put into the system example trans lines or vent tube only ?
@chief3378
2 жыл бұрын
can we get a update on the Nova please
@1999evo1
2 жыл бұрын
Please ......
@bloodsweatandhorsepower2079
2 жыл бұрын
You guys should definitely do a tech tip Tuesday on the monocord
@lewisdeclouette6342
2 жыл бұрын
Good looking out preciate it
@curtjobity8360
2 жыл бұрын
Great content bro very informative thanks
@CARRIERGUY
2 жыл бұрын
Awesome!
@rickwatters7849
2 жыл бұрын
Your presentations are getting much better. You may want to consider not saying “ To tell you the truth” I have already assumed you are telling me the truth. Maybe say “what I have found is....” or “ our experiences have shown us”. You may also use a dry erase board to illustrate your verb length examples.
@richardcoleman9645
2 жыл бұрын
So is there a video how and where to install this please?
@WendySaysSo
2 жыл бұрын
Any Nova updates ?
@skylinejunky2200
2 жыл бұрын
thanks big time fam
@dunepunk78
2 жыл бұрын
Stubby LS oil dipsticks! Let’s make one ☝🏻
@RobertSiwik1968
Жыл бұрын
So is there a way to calibrate a dipstick,and how do you know how much to overfill the trans?
@kylethomas394
2 жыл бұрын
Have you done one about choosing the correct rear gear ? I’ve been asking around to see what i need and so far have gotten 3 different answers from 3 different people ,
@Knackersjewels
2 жыл бұрын
That comes down to personal preference
@30YearOldBunta
Жыл бұрын
What kind of force would cause the pan to get sloshed like that because I'm doing 2.04 60fts in my big daily driver and I'm having shifting issues but seemingly only at the track, street pulls fine if I roll into it. I might try something like this before I tear apart the transmission.
@claymore440
2 жыл бұрын
So what does he say about using what method to insure your transmission is at the correct level? Stock dipstick?
@joecameron3406
2 жыл бұрын
How about in line transmission filters
@courtneychappell8801
2 жыл бұрын
America 🇺🇸
@irvingbar4569
2 жыл бұрын
Im having that problem when I get on it it pukes from the breather can it be a bad converter 5.3 ls to a built th400 2500 stall happens when I hit 80 mph
@irvingbar4569
2 жыл бұрын
I did over fill the transmission but you would think it would puke the extra fluid until its happy I hope this overflow can helps
@jamieschnowske4981
2 жыл бұрын
I was always told that overfilling a trans can cause the fluid to foam and damage a trans
@barryacromp6775
2 жыл бұрын
Trans fluid has anti foaming properties factored in its ingredient formula overfilling normally causes weeping from the vent hence the need for a catch can.
@rossgebert-goldsmith183
2 жыл бұрын
Prime those converters good
@ClarksAutoAndPerformance
2 жыл бұрын
Do you plan on making a lid without a weep hole? Run the top fitting to the coolant catch can.
@JBarnes917
2 жыл бұрын
Why would you want to run it to the coolant catch can?
@JBarnes917
2 жыл бұрын
@@motoweenies4431 then you have the chance of trans fluid in your coolant or coolant in your trans fluid… both sound stupid
@JBarnes917
2 жыл бұрын
@@motoweenies4431 no let’s say you pop a head gasket, it pressurizes the cooling system and that pushes coolant now back to the trans. You had something simple that just took out your $10,000 trans.
Пікірлер: 42