Thank you very much James. This has been a wonderful tutorial.
@Fix_n_Fly
Жыл бұрын
James, thank you for sharing your build with us. I’m just waiting for one to become available. I’m a child of the 50’s and the Mercury 7 were my new hero’s. (Sorry Lone Ranger and Tonto) W2FTR 73
@JamesMegaWatt
Жыл бұрын
Thanks for your comment Frederick, appreciated. Good luck with your build. 73s DE OT5Z
@juanpiq1
2 жыл бұрын
Thank you very much James for the video. I bought the MK3 and have had it for 1 month. I have only done the test in the bank so everything you explain will help me a lot. Happy New Year, 73
@JamesMegaWatt
2 жыл бұрын
Good luck building the comlete system! Thanks for the kind words and Happy New Year to you too.
@hb9zcf476
Жыл бұрын
Super contribution. I forgot to start with PUTTY. You helped me so much. And a very easy instruction to build up this rotator. Mny tnx, 73
@JamesMegaWatt
Жыл бұрын
Thank you for the feedback, glad it was of help to you!
@wildbill1
Жыл бұрын
Thanks for the nice video. i am just getting into satellites my self and have been looking for a good auto beam controller. SARCTRAC seems to be the way to go. Plan on mounting the beam at the top of my roof.
@timothyboyd5669
Жыл бұрын
Wish SO-50 sounded like that here is the US. It is a total mad house. Everyone steps on everyone
@VinnieVanhoecke
Жыл бұрын
Bedankt voor deze heel goeie video! Zeer goeie samenvatting voor de SARCTRAC MK3 en ik hoop ook zo eentje te kunnen bemachtigen (heb alvast de makers hiervan gecontacteerd) Ik heb een tijd geleden eens de nyansat gemaakt maar is helaas niet zo weatherproof :D
@mieszkogulinski168
9 ай бұрын
Isn't it a problem that the rotator has a heavy antena (with counterweight) on one side and nothing (no counterweight) on the other side? Also, 73 de SQ2KTN
@cyprimole
Жыл бұрын
Hi, Great video I am just setting mine up. Have tried putty and got the motors to move as you did. Now trying to setuo Satpc32 but cannot get it to work. Could you give me some starters....thank you
@naskar229
Жыл бұрын
Hello, what kind of stepper motors are you using?
@calarfe
Жыл бұрын
Hi, nice video. Any idea if sartrac Mk3 works with ham radio deluxe ?
@ed190trejo
Жыл бұрын
I'm in germany, where did you buy your SARCTRAC MK3? I can't find a link to buy in europe?
@JamesMegaWatt
Жыл бұрын
I bought it through the official website, I believe it was Australia...
@nickturin432
11 ай бұрын
What kind of homemade power supply do you have? Could you make a video about it?
@JamesMegaWatt
11 ай бұрын
Hi, unfortunately I don't have time to make a video on it right now, however, I did write a blog post about it about 10 years back: project-eps.blogspot.com/2013/05/linear-regulated-bench-power-supply.html?m=1 Hope it helps!
@PaulGrahamM0PGX
2 жыл бұрын
I've made something very similar to this, except it uses an ESP32, geared stepper motors and wifi for rotator communication. What is the sensor, a magnetometer and a gyro? I guess they are none-ferrous bolts for a counterbalance? Do you read the sensor during a pass? Doesn't the RF interfere with the sensor when you TX? Looks good :)
@JamesMegaWatt
2 жыл бұрын
The manual describes the sensor as 'Absolute position sensing 3D Magnetometer/Accelerometer'. You are right, I should use non-ferrous bolts, but they are not. It is what I had available, and it works, but I agree, it is a point for improvement. Don't know yet if the RF interferes with the sensor when TXing, I'll find out soon.
@PaulGrahamM0PGX
2 жыл бұрын
@@JamesMegaWatt thanks for your reply :) I get interference on mine when I TX, so I use the sensor to find North and level. I use stepper motors on mine so count the steps to keep track of where it's pointing. I was using 3D printed planetary gearboxes but have recently taken delivery of small commercial ones from China that have very little play on them, so it will be interesting to see how well these work. Any way, congratulations on your rotator, it looks good :)
Пікірлер: 23