This is the best tutorial I have found on this machine. Thanks
@AdamsAnalysis
3 жыл бұрын
Glad it was helpful!
@dougnorton5143
Жыл бұрын
To all of you watching this, one important place to also check when looking for leaks in the system is the evaporator core. This is where UV dye is basically worthless unless you have a gross leak in it. The best method I have found is by using a high quality electronic sniffer such as the one in the video. Simply place the wand into the passenger side air duct and with the fan on low. Simple but works.
@drollfeather5700
3 жыл бұрын
Amazing video thank you for taking the time out to explaining how to use the machine.
@AdamsAnalysis
3 жыл бұрын
Glad it was helpful!
@BizzmarkBajimbus
5 ай бұрын
Great video, thank you for your help.
@papichulo9705
4 ай бұрын
does tue ma home stop by it self? when recovering ?
@stevenpcope
4 ай бұрын
Useful, thanks.
@firefighterted5906
2 жыл бұрын
Great video! Thank you for taking the time to explain how to use this machine. Do you know the size of the calibration weight(I can't find mine) and if you can use the recycled Freon to recharge? Thank you in advance.
@pfoxhound
2 жыл бұрын
If you check for vacuum, when system is charged - it is positive pressure, so you can get a leak under positive pressure - not negative. How to test it for positive pressure leak?
@crazybeavis7978
11 ай бұрын
How to u get the machine out of high pressure lock out mode ?
@AdamsAnalysis
9 ай бұрын
Good question, I would have to consult the manual. Most machines have an air purge function to help reduce high pressure in the storage tank. This is often a slow process.
@carlovisciarelli7862
3 ай бұрын
Adam how do you use the oil injection?
@user-te3pn4pb4u
11 ай бұрын
curious do you ever use a micron gauge on vacum test and do you check super heat and sub cooling
@AdamsAnalysis
9 ай бұрын
Most automotive AC equipment only reads to in/Hg on the vacuum side of things. It is also interesting that most automotive technicians do not run calculations for super heat or sub cooling.
@alasek
2 жыл бұрын
I would like to know how to inject oil with the machine and how to equalize the hoses You didn’t show those steps You said you didn’t add oil because nothing came out Can you make a video explaining how to add oil and equalize the hoses
@AdamsAnalysis
2 жыл бұрын
I will add it to my list. Thanks!
@adin22222
Жыл бұрын
How do you inject the dye in the system
@bosivain
2 жыл бұрын
Hi does the machine put new refrigerant in or recycle what came out? thank you
@mobileair6416
Жыл бұрын
It recovers it through a drier and then goes into a recovery tank. A vacuum is pulled on the system to remover moisture(air). Then the refrigerant is pulled back into the system.
@GregsAutomotive
5 ай бұрын
My oil system dont work. Ihave to take off compressor and oil manually.
@nbarrager
3 жыл бұрын
It's weird to see one of these that isn't covered in oil and uv dye and generally beat to shit
@AdamsAnalysis
3 жыл бұрын
I hear you there!
@jesussalazar5503
2 жыл бұрын
Hi do you know how to calibrate the scale and magent
@AdamsAnalysis
2 жыл бұрын
I would have to review the manual. I'll consider it for a video about machine maintenance.
@anthonym2277
2 ай бұрын
You should have told us to check the oil container before you showed us how to recover.
Пікірлер: 26