Gorgeous plane!! Your enthusiasm for the Avanti totally shows!!
@pug306hdi
Жыл бұрын
great video! Currently waiting on my Wemotec 80mm EDF unit with HET motor 1865KV. Seeing these kinds of speeds is just Wauwwww
@raffaelerossi5183
Жыл бұрын
Great fly. I recently bought a new Avanti S. Great plane very stable.
@TheLowelllife
Жыл бұрын
I get 20 minutes on stock motor on 8s2p8400MAh (138A full power) Li-Ion when at 50%. And 9 minutes when actually having fun. Guys say it's the fastest EDF in the club. Odyssey ordered. Thank you for the new addiction! -DeadstickDuck p.s....... Looking forward to P45b.
@sendit_rc
Жыл бұрын
That's what I'm talking about 👏
@paulcarruthers1314
Жыл бұрын
Great flying I thought you’d touch a wing tip at one point.
@chrisr4274
11 ай бұрын
Can you run that system on 6s and 8s? I want to up grade my Avanti S. You have done an awesome job with yours. Can you recommend a good fan and ESC? Affordable but fast. Thanks
@philippeveyt7961
Жыл бұрын
That's amazing. You fly almost 5 minutes and using only 3250 mAh. If my calculation is right, you draw 39 amps average, which is superlow. I don't understand how it is possible...
@nml5536
Жыл бұрын
description says 4000mAh
@philippeveyt7961
Жыл бұрын
@@nml5536 telemetry told 3250 after the flight if I heared it correctly
@EDFjetRC
Жыл бұрын
I fly on 8s
@stark1758
Жыл бұрын
How does the Freewing 12 blade 80mm handle 8S without coming apart? That plane rips!!!!!
@lancelink88
Жыл бұрын
Great video. Why didn't you install the wing knives?
@EDFjetRC
Жыл бұрын
slowes down the plane
@stevewoodcock4240
Жыл бұрын
Hi I’m loving your videos. Can I pick your memory about your old Sebart Mini Avanti S. it’s setup with Mini Avanti V2 JP Hobby retracts with brakes (powered by 3S 450mah lipo 55g) Wemotec midi Evo 90mm 11 blade fan partnered with HET Typhoon 650-68-1500 36mm motor. Wemo 11 90mm Midi Evo coupled with HET 1500kv 650-68 36mm spec says 80a 2368W 3.69KP Hobbywing HV (5-12S) 120amp ESC (opto) FrSky TD R18 and 2x 1100mah life flight batteries (132g) X20 Radio Hitec HS-5085MG servos Turnigy 5000mah 25-35C 4S LIpos x2 in series, 8S, in good condition not puffed 980g weight combined. On the bench I've measure WOT on two types of 8S lipos : 45C Graphene 2023W 75A 25C Turnigy 2271W 80A Bench tested WOT with 10S. 109A 3874W On testing it would struggle to lift its nose, even with 10s. I’ll upgrade the front strut to raise the nose on taxiing. Am I on the right direction with this setup, or should I be looking at a different motor fan setup? I’m not after crazy speed, just a good practical setup. Thanks
@rusbry
Жыл бұрын
Which Freewing edf did you use? they have 2 12 blade units. any modification to fit the motor? My Avanti just arrived and I want to get it into the air asap. Thanks for your videos!
@N2RIT
Жыл бұрын
You install this motor on the stock Freewing 80mm Fan? Man that plane rocks.
@supernoir_YT
Жыл бұрын
Nice! U use 3 Flight mode DR as the manual write for Mini Avanti? (DR 100% on landing and spin with full Flaps for ailron&elevator) Im now ready for maiden, Thank U the answer 😊
@EDFjetRC
Жыл бұрын
no just 1 flight mode... standard 10mm deflection is enough
@supernoir_YT
Жыл бұрын
@@EDFjetRC Thank U!
@shayankumarnag8650
Жыл бұрын
Sir have you made this yourself
@blacksheeprcmodelers959
Жыл бұрын
stock fan but a different motor?
@daysdesigns
Жыл бұрын
Does anyone sell these Li-on batteries you speak of? I'm assuming you swapped motors?
@EDFjetRC
Жыл бұрын
Get Molicel P45B from Nkon.nl
@blacksheeprcmodelers959
Жыл бұрын
are you USA? or
@daysdesigns
Жыл бұрын
@@blacksheeprcmodelers959 yes. USA
@Fatpumpumlovah2
Жыл бұрын
Gee in your other video ypu said Avanti sucks for high speed
Пікірлер: 27