Nice run video i like what I see bro last night i saw some one with this motor on display when I see the piston i know i would like the engine.now i know it real good.. thanks for the ride 💯👍🙏
@Littleevil9975
8 ай бұрын
Long time no see bro cool build thanks for sharing it bro
@mbrrideitlikeyoustoleit8436
6 ай бұрын
Thanks yea I kinda slowed down on riding it’s been kinda cold. I can’t wait for summer.
@jmrides777
5 ай бұрын
Great run. Seemed real easy for your build to hit 50mph.
@Op1zilla
8 ай бұрын
Whatch out for the pop up, sounds good tho 👽👍
@mikemiller3303
8 ай бұрын
Sounds awesome brother ride safe
@SuperTrikeBicycle.
8 ай бұрын
Real gps view ... awesome
@BuildBreakFix
8 ай бұрын
Very clean and mean!
@jray4957
8 ай бұрын
Nice got some power to it
@KevinTodd
8 ай бұрын
I finally get to see one run what pipe are you running and is it in stock configuration nice ride brother ride safe✌👀👍
@mbrrideitlikeyoustoleit8436
8 ай бұрын
Yes stock just pwk21 carb upgrade stock
@joseayala6981
5 ай бұрын
Can I ask I jets did u use?
@aaronalbers91
8 ай бұрын
That's pretty cool almost 50mph and that's stock badass
@mbrrideitlikeyoustoleit8436
8 ай бұрын
At 6:00 I hit 50
@pitapitabread
3 ай бұрын
@@mbrrideitlikeyoustoleit8436 is it really all stock with a jrl/bofeng carb'?
@Jarrod_D
8 ай бұрын
WOT,WOT 🚴💨💨💨💨 WOW
@BuildBreakFix
8 ай бұрын
Just to note: that cloud is not the engine exhaust behind jarrod's emoji 😂
@Op1zilla
5 ай бұрын
🚴💥☁☁☁☁
@meskalin64
26 күн бұрын
Dont forget the stop signs!
@MrThatnativeguy
8 ай бұрын
Link to the Olyin cylinder head? I know smolik makes heads but i think they look a little too showy for my liking.
how do you adapt a pwk carb to it? do yoy have a link to the intake, im wondering because i have one lying around and i would like to swap it, i just cant seem to find the 21mm intake adapter.
@swamplife2413
3 ай бұрын
Drive it like you stole it!!
@user-ye7vp8ll7m
8 ай бұрын
Is that the bottom and part of the top of a yd 100?
@SuperTrikeBicycle.
3 ай бұрын
Nice run. Where are you at sea level? Im in central Texas, Can consecutively hit 50mph. My record 3 times ive hit 53mph on a good day.
@mbrrideitlikeyoustoleit8436
18 күн бұрын
Nice I’m in Arizona
@sethgarrett1994
8 ай бұрын
How are the crank seals will they need replaced out of the box or are they seated nice
@mbrrideitlikeyoustoleit8436
8 ай бұрын
They are seated nicely.
@nothanksgoogle5879
8 ай бұрын
Mine had the slightest little shavings on then. Legit hair thin. But they looked to be seated properly.
@grendelsgarage9723
5 ай бұрын
Nice rip!!! 🎉🎉🎉
@mbrrideitlikeyoustoleit8436
18 күн бұрын
Thanks
@michaelbrinks8089
8 ай бұрын
Is the avenger 85 an iron sleeve jug ?
@mbrrideitlikeyoustoleit8436
8 ай бұрын
No It is not a iron sleeve
@michaelbrinks8089
8 ай бұрын
@@mbrrideitlikeyoustoleit8436 thanks for info.
@kimdecastro9156
7 ай бұрын
sounds nice
@nothanksgoogle5879
8 ай бұрын
I can't get mine to run right. It runs like poop unfortunately. All I did was open up the intake manifold a little before installation. Can't get squat past 1/4 throttle and tops out around 20ish mph.
@justanothermotorizedbikech5138
8 ай бұрын
Run the motor on idle and spray brake cleaner on the gasket areas if the motor reacts you have an air leak if not it could be a jetting issue or your squish isn’t tight enough
@1RickSanchez
6 ай бұрын
Have you run into issues with the crank seals yet? Mine only lasted about 20 miles.
@mbrrideitlikeyoustoleit8436
6 ай бұрын
I probably need to check mine thanks because it runs great but having trouble with it idling. Haven’t started it for a couple weeks now haven’t had time.
@1RickSanchez
6 ай бұрын
Dont remove/port your bearing shields. I did and now it wont run right with ALL new gaskets and seals. I'm gonna try Smolik's viton seals with my ported sheilds before tearing into it.@@mbrrideitlikeyoustoleit8436
@joshjoshua6479
7 ай бұрын
Clean ride, how does it hit 50 mph?
@mbrrideitlikeyoustoleit8436
7 ай бұрын
It’s the new average 85cc stock except the pwk21 carb. 10t/36t on 26” wheels
@mbrrideitlikeyoustoleit8436
7 ай бұрын
It’s the new average 85cc stock except the pwk21 carb. 10t/36t on 26” wheels
@glennford2493
3 ай бұрын
Mines on the way
@mbrrideitlikeyoustoleit8436
18 күн бұрын
Nice
@notsure2024
7 ай бұрын
What rear sprocket you running and do you have a pipe on it
@mbrrideitlikeyoustoleit8436
18 күн бұрын
10t/36t stock pipe
@loud.p500
7 ай бұрын
planning on combining an avenger and a shifter kit, hopefully it should go even faster then that. is that a stock motor?
@mbrrideitlikeyoustoleit8436
7 ай бұрын
Yes stock engine all I did was upgrade the intake and put a PWK 21 mm carburetor. The engine is stock stock pipe Stockport timing.
@mbrrideitlikeyoustoleit8436
7 ай бұрын
That’s gonna be awesome with the shift kit. Are you gonna post it on your channel? That would be awesome Would love to see how it turns out.
@loud.p500
7 ай бұрын
@@mbrrideitlikeyoustoleit8436 i probably will post it, it will probably be a fairly budget build too. Gonna try and keep it under $700 cad
@loud.p500
7 ай бұрын
@@mbrrideitlikeyoustoleit8436 did you add a reed valve?
@mbrrideitlikeyoustoleit8436
7 ай бұрын
No reed valve I’m using the intake off Amazon for the 212cc. SJVLXHI Black Intake pipe for 212cc GX200 VM24 pwk24 Mini Bike Go Kart a.co/d/8VUg2NR
@nothanksgoogle5879
8 ай бұрын
I'm running 20ish:1 with premo
@mbrrideitlikeyoustoleit8436
8 ай бұрын
I’m running 32:1 87 octane
@nothanksgoogle5879
8 ай бұрын
I do have 50-72 main jets for the nt speed carb though.
@vanderley43
7 ай бұрын
Como faço para comprar um moto desse? Brazil
@vijaykorvekar1009
5 ай бұрын
Cost of cylinder, cylinder head, carburetor, crankshaft, piston and exhaust pipe
@laynesworldchannel2437
7 ай бұрын
What's your brake setup
@mbrrideitlikeyoustoleit8436
7 ай бұрын
I’m using pit bike brakes. Best brakes I’ve ever used highly recommend them.
@Baby_ellis
7 ай бұрын
What’s the gearing?
@mbrrideitlikeyoustoleit8436
7 ай бұрын
10t/36t
@RaoulDuke224
7 ай бұрын
That's what I'm doing to my phantom 85 trying to anyway I got the same performance Head
Пікірлер: 70