Should I adjust tension for both mechanism sides , or for only one mechanism (left hand sided)
@marcopolo4954
3 ай бұрын
What to do, when there is enough tension, but Aventos HF does not soft close in the end of closing position?
@SteelerPride99
Ай бұрын
I have had this system for several years and one of the telescopic arms snapped due to the plastic portion breaking. Anyone have this happen or know why it happened? I thought it might be the tension on the lift system was too tight, so I loosened it, but then cabinets droop very low and are not very practical.
@luclacasse5217
Жыл бұрын
Great job! I have a problem, my doors open up to high and hit the ceiling, is there a way to stop the system to open to high? My system is Aventos HF
@BlumInc
Жыл бұрын
We offer angle restriction clips for AVENTOS HF!
@vincentpaulino4917
11 ай бұрын
What bit do you guys use to adjust the aventos door
@musthavechannel5262
Жыл бұрын
Hi thanks for the demonstration video. I have an Aventos HF system that opens too fast, exactly like the demo in the video. Looking at the tension adjustment settings, it is already set to least tension (the reading is all the way to the bottom). I have double checked the installation measurements and they appear to be correct. i.e., TDH = 382mm Blum Assembly screws distance from top calculates to, 382 * 0.6 - 57 = 172.2 Arm attachment point's lower screw position calculates to, 382 * 0.5 + 47 = 238 Everything appears to be in order until the door is opened and it slams to the top :( Do I have a faulty mechanism? Thanks.
@BlumInc
Жыл бұрын
Hey there! It could be that the lift mechanism itself could be too strong for the weight of your door. Please email us at marketinginfo.us@blum.com, and we can provide a bit more information about this. Thanks!
@user-ih3yz2it8j
Жыл бұрын
Help me understand the exact spec on the bit being used. I've tried a number - not of which move the tension adjustment.
@BlumInc
Жыл бұрын
We recommend a #2x2 POZI driver bit for AVENTOS adjustments.
Пікірлер: 11