Truly informative for all Yamaha A/V amp owners. My vintage (1998) DSP - A1 has a switch on the back for 4 or 8 Ohm. It has always stayed on the 8 ohm position for 22 years. 👍
@SlotHits777
2 жыл бұрын
I have that same one too (DSP-A1).. That thing is a flagship beast! :)
@Ty-qj6ws
Жыл бұрын
I'm hoarding my DSP A1, never letting go!
@spacejaime
Жыл бұрын
@@Ty-qj6ws - LOL! Me too.
@dennishill290
Жыл бұрын
Wish I had gotten a DSP-A1 for my collection... but I Still have my RX-Z11...!
@paddy9777
2 жыл бұрын
please make video on parametric eq and what settings are best
@thorodin3631
Жыл бұрын
I'd assume that the EQ would be best configured depending on the speakers you have connected to it.
@xmj6830
2 жыл бұрын
I just subscribed because what you say just make sense. I'm in the electrical/electronic industry and unfortunately many peoples around just ignore the fundamentals and go on preaching their inaccurate doctrines. Always check the facts! Thanks Gene for just doing that.
@danny51577
2 жыл бұрын
Doing a somewhat budget 5.2.2 setup when basement is finished remodeling. Just ordered a2a and 2 sb1000. I'm setting mine up however Gene tells me to. Haha. But seriously, whatever I've learned from this channel in the last 2 months is what in doing. That's why I ordered 2 subs.
@user-cl5ji1zi3j
8 ай бұрын
Wow gene I wish one day I meet you you knowledge in this field is outstanding you save my life with this video Thank you very much...
@hometheaterjoe9489
2 жыл бұрын
Thank you for the information Gene!! Great stuff as always!! Love your work… BOOM
@JadeB628
4 ай бұрын
I own the A6A. mine does not have a physical switch on the unit. but it does have it on the on-screen menu. However, Yamaha removed the 4ohm option via a firmware update and gave two options. 8 ohm and 6 ohm. I hope to see a new review of this awesome receiver. Thank you, Gene.
@cvee2614
2 жыл бұрын
Gene, great video and data points with regard to impedance selection and extra bass settings. Replacing my 27 year old RX-V690 Dolby Surround 5.1 (85 W/channel 2 channels driven) with the RX-A2A at 100 watts is a "beast" as you say. Dolby ATMOS sound is mind-blowing with volume levels set at -20 dB to -15 dB.
@williamkramer9069
2 жыл бұрын
50 watts at 7 channels is WILD. 25 is INSANE. Please do a video about all the advantages to adding an amp or amps to a receiver. Matt recently commented in a thread on ASR that people would be surprised how often AV receivers go into clipping. It would be nice for you guys to elaborate on that topic!!!
@EJHilt
2 жыл бұрын
They have in the past. Av receivers on its own power supply vs separates/ additional amplification. These are older videos and still useful today for anyone.
@MrJjburgess11
2 жыл бұрын
@@EJHilt 100% . I learned so much in the past year from watching all these videos.
@EJHilt
2 жыл бұрын
@@MrJjburgess11 it's a good channel on KZitem. And very educational on audio and equipment specs etc. Been watching audioholics for years. Enjoy the channel brother.
@williamkramer9069
2 жыл бұрын
I want a full hour deep dive talk. Maybe a "case study" of a 1500 or 2000 dollar receiver with 4 ohm speakers, 7 channels being driven vs what actually happens when you add a 5 channel amp and run 2 off of the receiver. Is it worth the cost in an average size room at less than reference (lets say 75db) listening level. What actually is happening over the course of a movie (or loud 2 channel) to justify extra amplification? It would be a interesting and educational video that no one has actually broken down with the expertise that audioholics could provide.
@ACSforEpic
2 жыл бұрын
My RX-A4A came in yesterday and I am beyond impressed with the sound quality this thing produces.
@southpawle641
2 жыл бұрын
I’m jealous!! When did you pre order it?
@ACSforEpic
2 жыл бұрын
@@southpawle641 I didn’t to be honest. I bought it Thursday night from Best Buy online and it came two days later.
@southpawle641
2 жыл бұрын
@@ACSforEpic dang. They really are selling the a4a at Best Buy. What’s your set up? 5.12?
@ACSforEpic
2 жыл бұрын
@@southpawle641 7.1 AVR Yamaha RX-A4A Polk CSI A6 center Polk TSx330T for lefts and rights OWM3 for surround sides Polk TL1 for surround rear Dayton Audi SA1000 amplifier powering my Sundown 15” sub in a 4.7 cube box takes 1,000 watts like a BOSS
@southpawle641
2 жыл бұрын
@@ACSforEpic nice! And the receiver’s amp runs all your speakers well?
@Chris21709
2 жыл бұрын
Thanks for that! Intending to get an A6A as part of a home theater upgrade as soon as they become available again (guess they're sitting on a ship off LA), replacing my old Onkyo TX-NR3007 (no HDMI 2.1). 7.1.2 system. Just looked up impedance on my old SVS MTS (6Ω), MCS (6Ω), and MBS (8Ω). Had thought lower than that, so good in any case.
@LarsonChristopher
2 жыл бұрын
You will love the upgrade. I did a surround system with 5 Martin Logan Sistine speakers (4ohms) and a Yam 3080. The amp handles the load and has more than enough power. Anthem is the upgrade when you need more power than what Yam, Denon, Sony, etc.. have.
@chipmunk6386
2 жыл бұрын
Like always.... Great info.! Thanks Gene. 👍👌👏
@RAMIRO61FERNANDES
Жыл бұрын
Great video. A true advice and comment with real measures. I have a A6A and I am learning a lot. Thank you, I want more ... The others youtubers coments about A6A is just bla....bla. I never give any credibility to coment that isnt based on real measures. Gene you are on the rock.
@ronspangle2840
Жыл бұрын
Better late than never.... Thankyou for your Power setting post for the Yammy A6A .. I just replaced my Denon X6500h with this new Yamaha receiver.. After several Reviews , a lot of complaints and praise, I took the plunge. Your other reviews that you posted with what this receiver puts out , and your honorable mention , told me this receiver is what I'm looking for . With other High end receivers/processors that are coming out without amplification without any Amps for twice the cost , kinda scares me on what the future cost of a home entertainment center will cost after buying enough Amps to fill your processor...... And the RX-A6A is the best chose for having the same power as the A8A and included BALANCED PORTS to Amp my front 4 Ohm speakers . This should carry me through for many years ....
@noahman27
Жыл бұрын
Thanks man. We just picked up an RX-A770 receiver and are figuring out how to set it all up. This seems like it will help us as we stumble thru the process.
@Edward135i
2 жыл бұрын
There's some topics gene will never stop talking about, cables and the impedance selector switch.
@TrevorDennis100
2 жыл бұрын
That sounds interesting. I wonder what he says about cables? Me thinks I'll go hunt that down.
@Edward135i
2 жыл бұрын
@@TrevorDennis100 it's snake oil, if you want the abbreviated version of it.
@mmcpa
2 жыл бұрын
Just got my A6A. Love the info.
@ronspangle2840
Жыл бұрын
P.S. This is the morning of my third day of owning my A6A and the firmware update was waiting on me this morning . I went from FW update 1.59 to FW update 1.80 ... My system is running well with very few issues that all Have been resolved... This is a much better receiver than how it reviewed a year ago . And the remote plays well with my Sony TV... and runs several function for my tv , Samsung UHD blueray player , and turns off my cable box..... I use my cable tv remote for everyday use , and hit the power button on my cable tv to turn on my tv, cable box, and my receiver , A well as turning everything off.... all this without programing and right out of the box....
@JeremyHansenblue2kid3
2 жыл бұрын
Kinda starting to wish I waited for the yamaha vs getting the denon. Hdmi works, clean power, looks super nice this time around. Mmmmm
@LarsonChristopher
2 жыл бұрын
Mmmmmmmhhhhhhhmmmmmmm
@GalvatronTypeR
Жыл бұрын
Thanks for this video. I was about to pull the trigger on an A6A… until I learned its 7 channel power. 52w is not acceptable and it’s unfortunate that Yamaha purposely cut power that drastically and there is nothing a user can do about it. My current Onkyo is bench tested at 103wx7, I’m very happy with its audio quality, so I’ll hang onto that for a few more years.
@philippebeauplan9431
2 жыл бұрын
You're right sir, I have been telling people about this for years
@Pohgrey
2 жыл бұрын
Gene, I'll bet a dollar that the guys who tell you the lower impedance setting sounds better with 4 ohm speakers are the same guys who say their expensive aftermarket power cords sound better too...
@milkman100001
2 жыл бұрын
they do..
@milkman100001
2 жыл бұрын
@stephen sheldon i agree.didnt say they had to be expensive.all of mine are custom made with materials totalling around £ 50 - £ 100. sound good enough..
@Pohgrey
2 жыл бұрын
Tell you guys what. Why don't you go to the Audioholics forums and start a thread talking about the awesomeness of aftermarket power cords? It should spark an interesting discussion... Lol
@Pohgrey
2 жыл бұрын
While you're at it, why don't you take a look at the many, many articles gene has written on the subject where he breaks down how silly this idea is from the viewpoint of an electrical engineer...
@milkman100001
2 жыл бұрын
@@Pohgrey i already have done. ive got to admit they do. but if you want to think the other way ,thats your choice. ive been listening to gene for many years and i do agree with him. but i also agree with all others like paul from ps audio. and many many others. if it wasnt the case that the sound changes from cable to cable,then every one would just use cheap wire. but thats not the case. and im sure youve spent as much money as you feel is right for your system too. right? its just the way this cables debate goes. ive come to a conclusion that both parties are correct.
@GB-je5tc
2 жыл бұрын
THX again Gene.... The empirical proof is in the pudding... ALWAYS. My machine is RXA2080 but I suspect there to be a lot of parallels here given Yamaha's designs, parts. I didn't put much stock in Eco this and extra loudness that because you run your signal through even more chips and parts correct? K.I.S.S. Keep it simple... God Bless and long life ole friend.
@kdw75
8 ай бұрын
Thank you. I have had the A6A and before that had the 2040. I am not rich, but have a 15' x 30' theater/rec room setup in the basement. I have an Atmos 7.1.2 setup with an SVS 18" powered subwoofer. All of my speakers are Klipsch. I have been so happy with the performance, but I am now wondering if I should add some sort of external amplifier to help out the A6A. I watch movies with the volume between -24 and -18 volume on the A6A.
@Audioholics
8 ай бұрын
You don't need an external amp based on your listening habits and high efficient speakers you own. Put your budget into some room acoustics treatments and/or some professional consultation service.
@hitsov
2 жыл бұрын
In any case all speaker manufacturers lie that their speakers are 8 ohm nominal, so it doesnt matter much
@Finite-Tuning
2 жыл бұрын
Ya had me a bit confused for a minute, you were saying one thing and the charts clearly said something different, and then a minute later it all came into alignment for me. Onkyo is my brand of choice and they use some kind of dynamic amp setup, I personally think it's mostly marketing. But you do have me curious about this as I have my receiver set to 6 ohms since all my mains are rated as such. I seriously doubt I'll notice any difference by switching to 8, but I'm willing to give it a try. But I agree 100% this really shouldn't even be an option at all since every amp on the market is load dependent already! In other words, the amp won't do anything until it sees a load. It shouldn't make a difference what you set the amp to since the speaker impedance is constantly changing while in use. I only changed my receiver to 6 ohms because of the dynamic amp marketing jargon, it could make a difference in my case if it actually does what it says on the tin. But I don't honestly know. Do you have any charts for Onkyo?
@Audioholics
2 жыл бұрын
They all function pretty much the same. You're doing your speakers a disservice by setting the switch to 6 ohms. I can't restate this enough before it sinks in for some people.
@Finite-Tuning
2 жыл бұрын
@@Audioholics: There's nothin wrong with a bit of skepticism, in fact it helps to keep the mind sharp. Although, skepticism becomes something else once proof is shown and folks still don't believe. I'm a numbers man, it's all just hot air until somebody can show me those numbers! Audio reproduction was developed with science, as it will continue with science.... Everything else is just noise. Cheers 🍻.
@Finite-Tuning
2 жыл бұрын
@@Audioholics: Just rechecked my receiver and the only option I have is 4 ohm or 6 and above. So yeah, nothing to adjust then since I've always been set to 6 and above.
@razatahir5688
Жыл бұрын
Hi. I have recently installed the Yamaha rx a6a receiver in a theater where there was a faulty marantz 9.2 receiver was installed before this Yamaha. Now, following your instructions as you have a lot of experience in this field. The speakers have changed there properties a bit. Some 4ohm speakers now have 3.5 or 3.6/7 ohms and ceiling speakers originally 6ohms are no now showing 6.5/7 ohms. Again I want to ask that should I choose the best matching impedance setting which is 4ohm minimum which means that fronts have 4ohm and others have 6/8 ohms. As we know that impedance matching is important for interfacing any two circuits. Lower impedence can cause overdriving of the amp and higher impedence will decrease the output power of the amp. Now this is a general concept. How can we say that a manufacturer not only Yamaha but almost all of them have created this feature/switch so user can select the impedence according to the speaker impedence is a useless feature. Yes you are right, if it will decrease the output power on lower settings, if not set properly can it effect the amplifier or the speakers by making the speakers more power hungry or forcing the amplifier to deliver more power? Your expert opinion is required.
@charlesmcguffy
2 жыл бұрын
Interesting. I'd like to try one of these with a separate power amp. There's a second hand Luxman M-700 that I have my eye on. Shame the colours won't match.
@JudgedVitality
2 жыл бұрын
I appreciate and enjoyed the video. Keep up the great work. I’m waiting for your final review on the rx A6A, to decide in buy it or the denon 4700H. I will use it mainly for movie watching surround sound and gaming on next gen ps5 and pc RTX 3080, so I kinda need more than one hdmi 2.1 port.
@tonysolis825
2 ай бұрын
Hi, interesting theory too everyone's take on this topic. I have had quite a few Yamaha over the years and I like the older ones better I have a Yamaha Aventage rx-a2050 and before I had an rx-a1010 I did just the bias to 16.7 it was originally set to 15.2 the services manual does say 15 plus or minus 2% I find it gets a bit hotter with it at 16.7 but sounds warmer to me on the Yamaha rx a2050 I set my bias on all channels to the 16.4 on this receiver and I installed about double the capacitor this unit runs at about 59 too 60 volts plus and minus the unit comes with only 2 * 12,000uf 71 volts capacitor for all 9 channels it seems as the power supply was sagging so I add about a extra 10,000 of 80volt to each rail and it proves they skip out on capacitors for power supply i also changed out the bridge rectifier too a 30 amp instead of the 15 A that was installed on this unit after that i have no complaints about this unit i also add a fan as it does run hotter now but sounds great and drives all my channels with a punch and clarity thats my take on this receiver the new receiver rx-a6a and up use the same amplifier modules just different capacitors but same transistors and layout. I bought mine used it also has two supply rails hookup to a relay at 64 and 37 volts this will switch to 37 volts in the 6 ohm or eco mode or handy cap mode lol if you have small speakers as satellites and are 4 ohm or 6 ohm it will sound better due to the power cut off too 37 volts
@Kevin6059
8 ай бұрын
2 years ago I bought the Aventage A2A, and unfortunately, I've been very disappointed with the anemic power. I've been happy with my old Yamaha RX-V490 with a lesser power rating, and expected a slight improvement in power with the A2A. Instead, it was MUCH less power and I am now struggling with the idea of spending even more money on an external amp. Heck, I'm even thinking of powering the A2A with my old receiver until I decide. I tried both the 8 and 6 ohm settings - same problem. Especially with the 4 ohm speakers I had but even with the old JBL's rated at 8 ohms. The old receiver sounded better and had more power. I was hoping this video would tell me I was doing something wrong, so I could correct it, but no go. Obviously I'm not an audiophile, but this was step 1 in what I wanted to be an upgrade to my whole system, but now I find myself limited to highly efficient 8 ohm speakers - and I just don't want to settle. I also don't want to spend a ton more money on power (like more than $700.00 or so) - so yeah. Really disappointed in the A2A. (speakers were Bose 8.2, and/or JBL CF-120's). I will be replacing them but wanted to solve my power problem first.
@mattjames8010
15 күн бұрын
I have a Golden Ear XL PASSIVE soundbar with two Super Sub x and a pair of the super sat 3’s for a 5.2 system and I have a 21-12 room with a 8’ ceiling and I am going to use the other two channels outside I am looking at the Yamaha A4A or a Dennon 2800 I like moves and music but I am really into sound quality for music out of the two AVR Receivers what is the best choice
@DEVILTAZ35
2 жыл бұрын
I always wondered about this. I have 6 ohm Dali speakers and a Yamaha A3060 and i thought you were meant to set Ohms on Amp to match speakers precisely otherwise you could damage the speakers. In doing so it does affect volume considerably.
@brooklynknightss
2 жыл бұрын
I have the 3060 to,, I love the receiver.
@danmckenna532
2 жыл бұрын
Excellent video!! Thank you!! 8 Ohm here
@sg1ds919
2 жыл бұрын
So what's the purpose of putting 4,6 ohms on a receiver if its not practical to use? Would is be better to use a separate amp like the Emotiva XPA-7 Gen3 7 Channel Power output: 200 watts/channel RMS into 8 Ohms; all channels driven , 300 watts/channel RMS into 8 Ohms; two channels driven , 490 watts/channel RMS into 4 Ohms; two channels driven? I have until Nov 12 to return the A6A to BestBuy. I just wanna make sure its worth the money. Man , if Best Buy would've had the Onkyo TX RZ50 in I would've have that first and save my self a thousand dollar. Thanks Gene for what you're doing I really appreciated..
@filipeperry
2 жыл бұрын
Great tip! Tks Gene
@dilbyjones
2 жыл бұрын
Thanks…one Day it would be nice to see how you set up the test so we can emulate
@gaurd3
2 жыл бұрын
Sounds like I should be good with power. I just brought the 1723s THXs to go with this. Moving on from my Aperion Grand Versus 1s. Wife doesn't know yet? Cross that bridge when I get there.
@raulgarcia1718
2 жыл бұрын
I have my receiver set at 8 ohms with all the extras off other than Dsp but I often run in pure direct mode for music and movies. I like how pure direct sounds better than straight mode but I sometimes wonder if I just stick to straight mode since I’m using bookshelf speakers and a sub.
@raulgarcia1718
2 жыл бұрын
@Strong Bull I tend to use straight mode for casual listening and pure direct when I want to focus on the listening
@tannhaeuser
2 жыл бұрын
Maybe it‘s for a configuration driving speakers in a surround setup with mixed ohm attributes?
@melberg9098
2 жыл бұрын
Thx for the vid mr G
@nemesida
2 жыл бұрын
Now the question is, if i have 2, 7 channel amplifiers 200w ch, all 7 driven @8ohms, 300w all channels at 4 ohms. Do i use 4 or 8 ohms on the receiver in pre-amp mode? Still cant find answer to that. I have 7.2.6 atmos setup. Speakers are, front Dali Rubicon 8 4 ohms, center is 4ohms Rubicon Vokal, surrounds R L are Rubicon LCR 4ohms. Rest are 6 ohms Oberons. What do i do with setting in this case? I have DENON 6700 receiver, that allows selection of 8, 6 and 4ohms. I know it's not Yamaha, but pretty much same questions with this settings. Same Japanese Ohm settings. As far as i read, it's still best set to 8 ohms, as with 6 and 4 i am just going to lose dynamics.
@LichaelMewis
Жыл бұрын
1:04 LMFAO! I know that scene extremely well!
@josefernandez2722
2 жыл бұрын
Thanks for that. Are there any negatives to this? Can the avr or the 4 ohm speakers get damaged with the high setting? Also I am in a peculiar situation in which I upgraded my speakers but because of supply chain issues I only got the center channel which is 4 ohms but the rest are 8 ohms. Would this cause any problems while I wait for the rest of the 4 ohm speakers to arrive?
@thedynamicd85
3 ай бұрын
great question.
@Foxrock321
Жыл бұрын
I’m guessing the same applies to the A8 as well..
@yoddeb
2 жыл бұрын
I think we get it now.
@dennispelaez187
10 ай бұрын
I was under the understanding Yamaha does not use internal fans in the Adventage line. Is that not true??
@ls3silveradoallmotor707
2 жыл бұрын
Hello hope your doing well I have the yamaha rx-a3080 I recently added a emotiva basx 3 channel amp the receiver doesn't let me select an external amp for now I'm only running 5.1 setup with klipsch speakers any help would be appreciated thanks
@ctrlaltdel02
2 жыл бұрын
Honestly, I tried AV recivers, and get tired of them doing funky busines with sound mixing, crosovers, and what not that is not exatly documented enywhere. Now just running signals in seperate components , pro speaker management dsp and power amp. Plenty of versatility and power. For a home gamer type AV reciver is way to go, less hashle, and almost plug and play. With pro gear you need to know what you are doing. I personally prefer pro gear.
@gb3496
2 жыл бұрын
7 channels driven and only 50 watts... even when leaving the impedance at 8 ohms? Still..?! Why?! Come on Yamaha!
@hitsov
2 жыл бұрын
My receiver doesn't even have impedance switch, but my highs are much more detailed and airy, mids are chocolatier and bass is much tighter when I switch it to 4 ohms.
@thedynamicd85
3 ай бұрын
but you said your receiver doesn't have the switch.
@mikeamizzle
2 жыл бұрын
Thanks as always Gene. Would you recommend upgrading from the Aventage A770?
@rynev3392
2 жыл бұрын
How do you determine what volume your getting the full rated power?
@jaygolden4218
9 ай бұрын
Thanks for the informative video....what are your thoughts...Im considering the Yamaha RX-A1080 vs the A6A to power 5 monitor audio speakers in a 18x 24 room with glass sliders...Thanks
@msoles30
Жыл бұрын
Is there a way to see the bitrate of the input source
@davidbrooks8061
Жыл бұрын
Looking to buy new receiver, thinking the A6A. Snell 5.1 speaker system right now, height speakers down the road. My question, was going to bi amp my main towers with the extra channel. After watching this would using the extra channel add more nanny's and actually cutting the power to my system ? Or should I still bi amp? I both listen to music and movies. Loud music, rock n roll.
@Selene_M3
2 жыл бұрын
Great! Any plans to test the RZ50 onkyo?
@LarsonChristopher
2 жыл бұрын
I will never understand why so many people are still interested in Onkyo after all the crap they pulled over the last 15 years.
@user-cl5ji1zi3j
8 ай бұрын
Is it the same amplifier inside as the Rx z7... thanks in advance
@slyfoxx8540
2 жыл бұрын
Have yamaha got back to you Gene? Have got an a8 and have 7 days left to return, and am a bit nervous about how much of an improvement these are. Although saying that I don't fancy any of the other bug ridden competitors at the moment.
@UltimateGattai
2 жыл бұрын
I'm also waiting on that review, I'm starting to get cold feet to the point where I'll cancel my A6A per-order and grab a cheapie until next years models drop.
@slyfoxx8540
2 жыл бұрын
@@UltimateGattai well everything is working apart from the ypao which seems to take away all the bass. But apart from that I'm happy, it has opened up my cheaper speakers a bit better but won't be able to tell properly till I buy my new ones. Just wish he'd update on yamaha's response. If there is one.
@UltimateGattai
2 жыл бұрын
@@slyfoxx8540 that's good to hear, I really wanted this AVR to be good since I've only owned cheap, budget AVRs before, plus I want to add in 11 channels. I'm planning to get atmos speakers at the same time and install next year along with either a 2 or 3 channel power amp.
@ehall8929
2 жыл бұрын
@@slyfoxx8540 I found the same thing on my older 3060, YPAO takes away the bass. Although the "Natural" setting is the least offensive I ultimately started using the "Manual" setting and keeping all speakers flat (No EQ) and bumping up the mid bass frequencies of the subwoofer just a bit. I haven't taken any measurements but it sounds better to me.
@mehulmepani
Жыл бұрын
If you have 4 ohm speaker and if you are so much concerned, just add a 2 ohm resistor in-line and that would be better!
@twinkie3793
Жыл бұрын
RX-A6A, how do you turn off the touch screen? so i wont turn it on when i clean it.
@joelgonzalez8078
Жыл бұрын
Great video just wondering does this knowledge also applies for entry level receivers like the Yamaha tsr 700 paired with 6 ohm speakers ns f350 and ns p350, should be set to 8 ohm?
@joelgonzalez8289
Жыл бұрын
Too funny...I read your comment and thought...I also have the tsr 700 paired with 6ohm speakers..I'd like to know the answer too..then I saw your name! 😆
@joelgonzalez8078
Жыл бұрын
@@joelgonzalez8289 lol
@msoles30
2 жыл бұрын
Hey Gene do you where to find the bitrate information on these units
@luisthepanamanianinlouisvi2968
Жыл бұрын
Should I do 7.2.2 on this? what kind of power will it push?
@1165mac
2 жыл бұрын
My Onkyo receiver has the same switch in its speaker setup menu. I assume that any receiver that has this switch should be able to adequately driver 4 ohm speakers, correct? Otherwise, there seems to be no reason to even include the switch if the receiver isn't capable. It's an Onkyo TX-NR727. Thanks!
@richarddortch6122
2 жыл бұрын
Gene, how does the A6A respond when the balanced outs are utilized for the front mains? Does that give more oomph back for the remaining channels? Could you test that for us? This is the operational mode I was planning on using this product for.
@SandeepKumar-fj8vy
2 жыл бұрын
Does yamaha put these protection circuits even in there integrated line like AS 501,801 ??
@khramovantonah
2 жыл бұрын
Hi Gene. Thank for your video! Could you answer me 100W on 8Ohm = same as 100W on 6Ohm ? Because when I switch to 6Ohm Receiver require more power from 220V. Why ?
@anthonycyr9657
2 жыл бұрын
I switch to 6 ohms and definatley noticed it was limiting current, switched back to default 8 and left it there, sounds better and louder with less distortion , yamaha system too.
@danielmoudy3066
9 ай бұрын
Hi , I have a RX-V6A Yamaha Receiver ! On my Front Right & Front Left Speakers it will Sound good for a while & then I lose my Vocals on my left side but not on my right side ! I still get the background noise but not the vocals on just my left side ! Is there any way you could help me understand what’s going on ? If I move the speaker to the right side it works fine , so I know it’s not my speaker ! HELP PLEASE ! Thanks
@sandykubiak9193
2 жыл бұрын
Bought the A6A about a week ago and just today started working on settings and sound levels…. With the TestTone going through the speakers no issue until it came to the subwoofer 1 and 2. I have a pair of REL G1’s connected to the sub outputs and no sound during test tone and put on a DVD with big bass and again nothing. Subs work fine with my Hegel 390 as well as my Devialet Expert 220 pro using the high level output and the rca output on the Devialet. Any thoughts that this is an issue with others?
@p.laz.tattoo
2 жыл бұрын
Gene, what is happening with the A6A? No updates for so long now. Are we still getting a full review from you? I’m waiting for your expertise and honestly before making a purchase on this product!!!
@Audioholics
2 жыл бұрын
Bench tests are available on our Patreon.com/audioholics. KZitem video will be live before XMAS.
@stephenfrancisvoros382
2 жыл бұрын
3070 set at 8ohm with 8ohm speakers, only way go. Gene I'm using two external amps, so my 3070 is only powering fronts and centre, what roughly would be the power going to these please???
@kacperuminski1547
2 жыл бұрын
What should you use when there are 4 and 8 ohm taps on the amp? (e.g McIntosh, Tube amps, etc.)
@LarsonChristopher
2 жыл бұрын
Use the corresponding tap to what your speakers are. Remember impedance is "nominal" and changes constantly with the music. Heavy bass tracks will be your low impedance stressors, classical music with violin solos are at the other end of the impedance load. Just be sure your amp can handle the load of the speakers, and also be aware when something seems too good to be true for the money...
@GodsSoldier2
2 жыл бұрын
What speakers can I use with the V4A receiver?
@MrJjburgess11
2 жыл бұрын
Back before I knew better . I was using the 6ohm setting on my Yamaha a2080. My q acoustics are are 6 ohms. But after watching one of your videos from a while back. I put it back on 8 . But I have moved onto separates now. With a monolith 9x.
@thiagodelgado3128
2 жыл бұрын
I missed out, how many watts this receiver can set ate 7 ch 8ohms driven? around 60w?
@user-cl5ji1zi3j
8 ай бұрын
I have a Yamaha rxv 3900....
@FASinatra1
2 жыл бұрын
Thank you for the informative video regarding IMPEDANCE Switch..Question...I have the Yamaha TSR 700 receiver...I cannot locate this switch..it isn't mentioned in the manual, so, where can I find this switch, and how do I change it. Thanks!
@Audioholics
2 жыл бұрын
If it has one, it's likely set to the "high" setting by default. Just leave it be.
@jamesharris5879
2 жыл бұрын
Now some guy with his 9 Channel JBL speakers playing reference level sine waves while at work to break in his new speakers and wondering how his house burned down. I kid but I wish you would have at least given a brief explanation of why this setting exists. I know you've hit on it in your previous videos, but I'm sure you made some poor electrical engineer at Yamaha cringe saying you would never under ANY circumstance use anything lower than the highest impedance setting. Love the video though, always appreciate the graphs.
@Audioholics
2 жыл бұрын
I've covered this topic ad nauseam already: kzitem.info/news/bejne/sKtryINuiWR1paw
@Skylarkberto
2 жыл бұрын
Hello I am confused a need recommendations. I ordered the Yamaha Aventage A6@. I currently have a 5.0 system. I wanted to upgradw to a 5.0.4 atmos. I would like to get a preamp for my front L/R speakers. I have oñder Cerwin Vega VS series 15”, there RMS is 500 watt each. What type, brand or wattage do I look for. Econ price please. Also atmos speakers (mounted on-wall not in-wall) can you help me please.
@bradthurkle7217
2 жыл бұрын
Would using the Altra center speakers standing up as lefts and rights sound better than the Ultra book shelf’s them selves.
@ulissepellegrino7175
Жыл бұрын
I had the same thoughts about the ultra center as left and right speakers, it's almost like having the ultra towers without taking up all that space especially if you also have a sub. Let me know if this is what you have.
@bradthurkle7217
Жыл бұрын
@@ulissepellegrino7175 yeah so true, thanks for the reply. I ended up buying the ultra book shelves and man they cranked up nicely I love them. Bloody expensive tho. $1700 Australian for a pair but I say pay once cry once lol 😂. I will eventually get the svs ultra center only to just keep things timber matched.
@ulissepellegrino7175
Жыл бұрын
Thanks for the reply.. I also end up buying 5 satellites speakers to save space with a sb 2000 pro sub and I'm super happy. Cheers from Florida
@bradthurkle7217
Жыл бұрын
@@ulissepellegrino7175 nice one. That sub would crank 👍. I like those satellites. Love to get a couple one day.
@johnvore
8 ай бұрын
Question I want to get your advice. In my loft I have the Yamaha V6A. My front speakers are custom built running at 2 OHMS. All of my speakers are very very efficient. I never push it hard cuz I just use this for watching TV, Sports and sometimes Pandora for listening to music. Do I still keep it at the high 8 ohms?
I can’t wait for my a6a to arrive. I have a 3 channel emotiva amp to power my 3 main channels. I am thinking about buying another amp to power 8 more channels 😭
@harishr4423
2 жыл бұрын
Thanks.. My RX A6A working beautifully with my Emotiva XPA5 . Great sound
@southpawle641
2 жыл бұрын
@@harishr4423 I bought another xpa 8 channels it came in yesterday. I bought a Yamaha rx a4a and will return it when my a6a comes in loll. Hey let me ask you something so I have 2 emotiva amps. One of them doesn’t even produce any heat. But it works when connected. Do you think it’s ok? And the other gets a little warm.
@harishr4423
2 жыл бұрын
@@southpawle641 Hi...the emo's hardly generate any heat..compare it to the a6a..its like a furnace. By hey,..they work great together. 200 rms!/ channel from the emo's..as against 150 from the a6a.. Enjoy your sound and let me know how they sound in your new set up..
@harishr4423
2 жыл бұрын
Wow..16 channels of power.. The a6a will give you a 9.2
@southpawle641
2 жыл бұрын
@@harishr4423 I know. My basement isn’t that big. I’m Just setting up for a new house in the future. Amps I can hold on forever. Right now I just have a klipsch entry level speakers. It’s still very good but I want new speakers already loll. I have eyes on aperion grand v6t or the concerts
@normrubio
2 жыл бұрын
So what you're saying is get a Denon?
@gb3496
2 жыл бұрын
Or a Marantz...
@normrubio
2 жыл бұрын
@@gb3496 isn't that just a denon on "music" setting?
@gb3496
2 жыл бұрын
@@normrubio LOL, I like that! :)
@milkman100001
2 жыл бұрын
hi Gene .so i have their 11 channel aventage amp .would you advise leaving that on 8ohm's too?
@ekimandersom4478
Жыл бұрын
🤦🏼 Obviously yes
@jayroland9481
Жыл бұрын
Why are you wearing headphones whilst talking to camera? Seems a bit odd so what are you listening to?
@paspolc
2 жыл бұрын
Thanks a lot for the video, very interesting .can you tell me if the rule of leaving the impedance set at 8ohm also applies to the Yamaha R-N803 on a two channel system driving two Elac dbr62? thanks again
@Audioholics
2 жыл бұрын
Rewatch the video
@WhiteZerox
2 жыл бұрын
@@Audioholics Zing! @Pasquale Leave it at 8 ohm min
@roanschoerie2870
2 жыл бұрын
What would you choose if you had to choose between Anthem AXR 740, NAD T778 and the Yamaha RXA6A?
@ekimandersom4478
Жыл бұрын
NAD
@SlotHits777
2 жыл бұрын
What's your assessment in 2021 of quality/value of pairing Yamaha with a pair of REVEL F36 towers? (80% movies / 20% music) .. SVS PB2K subs || Note, the question is.. F36's vs. possibly getting SVS Ultra's instead.
@fredrikpetersen8352
Жыл бұрын
Anyone who can tell how big of a sound difference going from an A2A, that i have now, to an A8A?
@WardoUSA
2 жыл бұрын
Yamaha a2a, is it worth using the bi-amp? Would that technically be using more than 2 channels? Seems like there would more than likely be a power loss when running my my front L&R only.
@WardoUSA
2 жыл бұрын
Was hoping to have some response on this.
@justgaming7938
2 жыл бұрын
English is not my native language and I don't know if I understood it correctly. I have the yamaha a6a with an old jamo 606 set that is 6ohm, so I lowered it to 6ohm on the avr since I read that it could be harmful if I didn't. So, even if the speakers are 6ohm, do I have to set the arv to 8ohm? Will it not harm the avr or the speakers?, thanks!
@Audioholics
2 жыл бұрын
The video is very clear on the proper setting for ALL Speaker impedance loads. Please watch again.
@Beanieguy503
Жыл бұрын
Quick question, Yamaha A4A I’m amplifying the LCR channels. The rest of my speakers are 6 OHMS, do I keep it at 8 or 6 OHMs. I guest leave it at 8 ohms. Thanks.
@thorodin3631
Жыл бұрын
according to this video it would be best to leave it at 8 ohms as the receiver will provide the speakers with more power at 8 ohms.
@Icecoldium
2 жыл бұрын
Has anyone dyno tested the rx-v685 all channels driven
@tommyK7282
2 жыл бұрын
yamaha rx-a2a aventage is only 24ibs that's not a good thing in my opinion. If it has seven channels and comes in under 30 lb that makes me shy away from it.
@BigFlipFlap
2 жыл бұрын
What if you’re using an external amp? I have a Denon 6500h feeding an Emotiva XPA 7. Does eco mode affect the output of an external amp?
@chrismonterubio9475
2 жыл бұрын
I have a denon X4400h that I run in eco mode with all 11ch being powered by external amps. The only thing that has been affected is the temperature of the unit, with it running about 5 degrees cooler then when I had eco mode off.
@sridharv56
2 жыл бұрын
Thanks for a very useful video trying to help audio enthusiasts like me extract best performance out of the sound investment we have made. Have a question on this. What happens if I have pre-amp outed the front speakers on to a two channel Yamaha power amp MX 600, from a Denon X3600H receiver. MX 600 also has a Impedance switch at the back which I have left as 8 ohms as per your advice. Your graph on 2 channel driven performance doesn’t seem to have much of an issue. Thanks once again hoping to receive a reply. Regards
@EB1000
2 жыл бұрын
While 0.1% THD is below hearing threshold of distortion, it's nothing to be proud of, especially at this price range. It also appears that this receiver is not compatible with 4 Ohm speakers. It would be interesting to see SINAD results from HDMI input to pre out for all channels.
@Audioholics
2 жыл бұрын
WTF are you talking about? I spec amp power at 0.1% and 1% THD for ALL amps/receivers I measure. It's a standard. The amp distortion is much lower if you lower the power a bit. SINAD results aren't good ATM but I'm hoping they can fix what I found via firmware.
@EB1000
2 жыл бұрын
@@Audioholics Try and look at test results for Hypex and Purifi amps to get some perspective how should a good amp perform..
@Audioholics
2 жыл бұрын
@@EB1000 I'm well aware of both and I own Pascal class D amps which are equally as good. I've measured the best amps I. The industry and have seen it all in 20+ years.
@adsfghyy69
2 жыл бұрын
Is this just a Yamaha issue or for any manufacturer with a 4-8 ohm switch
@Audioholics
2 жыл бұрын
Any AV receiver that has an impedance switch will severely limit power in the low setting.
Пікірлер: 221