This is exactly what I was looking for! I've got an old Craftsman hatchet that need this treatment along with a new handle. Thanks for posting every step in the process! Best regards and thanks for posting. :D
@david2m2anderson
2 жыл бұрын
Best video on axes I have watched. Authoritative with detail like bevel to 25 degrees.
@arm4238
9 жыл бұрын
step 9: REHAFT- PUT IT ON A HICKORY HANDLE.
@3rogers2010
9 жыл бұрын
I prefer wood too.
@varun009
8 жыл бұрын
+Firefighter's Tool Box Alright, but, wood or nor, why isn't the head seated correctly? Looks like the top of the eye is inset about half an inch.
@3rogers2010
8 жыл бұрын
I thought the same thing until I did further investigation. I had a look at some of our other axes and they all had the same gap. These handles have a fiberglass core that is about an inch wide and half an inch thick. This core is the structural portion of the handle and is seated correctly in the eye and filled with epoxy. The gap that you see is where there was a foam gasket. During manufacturing the gasket was used to act as a seal for the epoxy but overtime has been wearing out and I have found that on some of our axes the foam gasket was completely missing. I know it looks bad but it doesn’t affect the structural integrity of the axe. The yellow plastic porting on the handle is merely there for grip and the white fiberglass core (which you can’t see) is the structural portion of the axe handle. I hope this answers your question.
@varun009
8 жыл бұрын
Firefighter's Tool Box Ah, I see. Still a shame you haven't got a hickory handle. I could never stand fiber glass.
@EricnotErick
9 жыл бұрын
Remeber knife to stone, stone to axe
@barryrhoads8716
3 жыл бұрын
Did you sharpen for splitting or for cutting/chopping?
@kaizoebara
9 жыл бұрын
25° per side is pretty obtuse, but I guess it makes sense for the kind of work expected from a firefighter's axe. Good job on the video.
@3rogers2010
9 жыл бұрын
kaizoebara Thank you for your comment. You are correct about the angle, as a firefighting axe it is use to cut through roofing material, drywall and at times even masonry. A thin and very sharp blade is not ideal for these kinds of materials because it would be vulnerable to damage. It’s kind of more a bashing tool than a cutting tool in this application unlike a forestry axe or wood working axe. Good observation.
@varun009
8 жыл бұрын
+Firefighter's Tool Box Don't traditional firefighter's axes come with pick though? Seems like a good way to preserve the edge. Is there any particular disadvantage to the pick?
@3rogers2010
8 жыл бұрын
The Pick headed axe is used for ventilation, overhaul and roof work the pick is good for prying up roof boards and decking. The flat head is most commonly used in conjunction with the Halligan tool. They marry and are carried as a set called “the Irons” and are used for work such as forcible entry and search and rescue.
@varun009
8 жыл бұрын
Firefighter's Tool Box The more you know.
@DistrictFire
8 жыл бұрын
Retired Ladder Company Loo..... Give regular car wax a try in step 8. Try it and evaluate it.
@gerrymcveigh2624
7 жыл бұрын
love the video very informative thank you!!!👀👀💎🔪
@The2stooledbeaver
10 жыл бұрын
what kind of oil
@3rogers2010
10 жыл бұрын
In the video I used motor oil which seems to work well. I find that wd-40 is a little to thin. 3 in 1 oil would also work. Some people use boiled linseed oil, but if you do, follow the application instructions carefully. You don't want it on your skin and the used rags can spontaneously combust.
@2mnxffrddfghjbbvcdfh6644bcddcv
6 жыл бұрын
Good no nonsense video
@rynobucket
8 жыл бұрын
Excellent video, but I don't have $300 in gear to sharpen an axe! haha
@3rogers2010
8 жыл бұрын
Ryan Rizzio I understand. I'm fortunate that my department was willing to spend the money to tune up our equipment.
@NobodyCaresALot
4 жыл бұрын
A dewalt angle grinder is $60, that's the most expensive purchase. Do you want a nice axe or not?
@vanstromi7810
7 ай бұрын
@@NobodyCaresALotMaybe times have changed since your comment but the bench grinder alone is at minimum $50 and that’s not with the polishing wheel you have to buy. Then, the angle finder and grinder, files (which for some reason are very difficult to identify which materials they can be used on imo), sharpening stone etc etc. I probably will invest in these items over time anyway, but I cannot imagine the average joe going out and buying all this stuff for a $30 axe unless they had the need for the tools anyway. Even then, it’s a stretch.
@zachcarr1557
10 жыл бұрын
It helps if you put the stone to the axe instead of the axe to the stone
@ponyboycurtis5734
8 жыл бұрын
I` m at the age now (43) that this kinda stuff appeals to me especially with the mellow narrator ! But Jeez ! Where do you get the time for that , maybe I just need a "sharpening stone with axe" video !
@osamabinliftin1981
7 жыл бұрын
justin carter too many tools I have restored axe heads from black and rusty too polished in a day by hand. Using sandpaper, wire wool, elbow grease, a file and sharpening stone.
@nickleonard9521
5 жыл бұрын
You can forget that 25 degree angle. 30-35 is much better for a fire axe
@eilirwilliams5767
7 жыл бұрын
What oil do you use to protect the axe after cleaning it
@3rogers2010
7 жыл бұрын
I like to use CRC Heavy Duty silicone spray. Some people have recommended using automobile wax. I have also used a thin coat of boiled linseed oil ,let cure for 24hrs, and add a thin coat of motor oil.
@asdfghj103
8 жыл бұрын
Great video and instructions but buy all this equipment or buy a new Axe? Maybe for what this would cost me a case of Axe's. I think that I will just take it to a professional sharpener and polisher. Thanks anyway for your help.
@theasylife
9 жыл бұрын
I need to get to work
@mrbluenun
8 жыл бұрын
Hi, And nice axe head. Shame the handle was not re-fitted. It is not safe as it is I hope you realise that?
@3rogers2010
8 жыл бұрын
+mrbluenun I thought the same thing until I did further investigation. I had a look at some of our other axes and they all had the same gap. These handles have a fiberglass core that is about an inch wide and half an inch thick. This core is the structural portion of the handle and is seated correctly in the eye and filled with epoxy. The gap that you see is where there was a foam gasket. During manufacturing the gasket was used to act as a seal for the epoxy but overtime has been wearing out and I have found that on some of our axes the foam gasket was completely missing. I know it looks bad but it doesn’t affect the structural integrity of the axe. The yellow plastic porting on the handle is merely there for grip and the white fiberglass core (which you can’t see) is the structural portion of the axe handle.
@mikhailkalashnikov4599
2 жыл бұрын
@@3rogers2010 I use the fiberglass/epoxy replacements on all of my axes and sledge hammers when they break- they don't split/crack or rot, and generally take lot's more abuse (IMO).
@mikehunt4797
6 жыл бұрын
If i had all the material you listed i think id already know how to do this,lol
@jamesritchie6899
8 жыл бұрын
I don't want a polished axe head. I want the bevel to be polished, but not the rest of the head. Paint is good protection from rust.
@smithysledge5003
11 ай бұрын
Me using 2500 to polish it...... 😅😅😅
@dolsen1975
2 жыл бұрын
is that thing on a plastic handle???? dear lord. anyone who loves axes is having a stroke right now.
@vanstromi7810
7 ай бұрын
It’s fiberglass and OP also stated that they much prefer hickory.
@anthonymoody5459
8 жыл бұрын
are they serious? who's going to buy all of that equipment just to keep a $20 axe good
@WelshPigeon
7 жыл бұрын
get a quality made axe and all you'll need is a sharpening stone
@Sam22music
6 жыл бұрын
I mean if you have an axe I would be surprised if you didn't already have all the materials in this video....
@LLUrbanAchiever
6 жыл бұрын
That's no $20 axe. That's a Council Tool made in the US. It's a tool of professionals.
@sergkaizen5342
9 жыл бұрын
Omg too much work
@dogncatmom
7 жыл бұрын
It would be cheaper to just buy a new axe. Most people do not have all of these tools
@jonsexton17
5 жыл бұрын
dogncatmom not an axe like that. All that material cost probably less than a new axe like those.
@firejoe283
3 жыл бұрын
If at a fire station, you'll have a lot more tools to keep and maintain So to say it would be worth the investment of you have a lot of tools.
Пікірлер: 49