Those are very clever upgrades/ mods! That incredible you got 75% more rotation in the front than in the rear! Great video brother! Really love test area!😁✌🏻Have a great weekend brother!
@RoadsideRC
2 жыл бұрын
Thanks! 👍
@204_mod_shop
2 ай бұрын
I added a total of 1 pound additional to mine, mainly front biased, and it's still not enough I've been thinking about getting these heavy brass rims that weight a pound each rim/tire combo, so additional 4lbs on top of my 1, should be plenty
@RoadsideRC
2 ай бұрын
I'm curious why you think it needs soo much weight?
@RcNickster709
Жыл бұрын
Now THAT is cool factor. I have been seeing some of these rigs with the higher Front overdrive and I must say they seem to work GREAT!!
@RoadsideRC
Жыл бұрын
I am a fan of overdrive for sure, but this ended up being excessive. I think I will keep mine to the 30-40% from now on.
@marcconnor4837
Жыл бұрын
I have 27% in the front it does pretty good I’m thinking of switching them out for the 60%. And if they are to much I’m thinking of taking the 27% and putting them in the back. And that should give me 33% overdrive in the front
@RoadsideRC
Жыл бұрын
That should work!
@edjunker
2 жыл бұрын
Looks like too much over drive to me. The rear basically did nothing to help in al most all of the obstacles. It really looked like the weight did way more. I'd go back to the 12.5% if it were me.
@RoadsideRC
2 жыл бұрын
You are right! I won't go all the way back to 12% - I have other trucks in the 30% range and really like overdrive around that amount.
@Redneckjames
Ай бұрын
It’s almost like it has dig installed
@RoadsideRC
Ай бұрын
Ha! Yes...dig that is stuck on!
@sscobrapride
2 жыл бұрын
affiliate link to that screwdriver?
@RoadsideRC
2 жыл бұрын
It has done really well for me so far. I use it with MIP speed tips: amzn.to/3rgWmVE
@TheRCBuildersPost
2 жыл бұрын
Geez the start up on that thing is terrible! Lol. I heard you mention that ISDT esc. Is that what is causing that? I got one in the electronics box to try out. I may never try it out now though lol
@RoadsideRC
2 жыл бұрын
Yes! I really hate that ISDT esc. It will be coming back out of this truck very soon.
@TheRCBuildersPost
2 жыл бұрын
@@RoadsideRC good to know. I will not be using it then. Great video as always, Troy!
@KurtsRCs
2 жыл бұрын
Haha it is like you have dig on all the time now
@RoadsideRC
2 жыл бұрын
Almost!!!
@hellofromsoutheastalaskarc7517
2 жыл бұрын
Hello from southeast alaska sweet looking truck bro I hope everything is going well for you today bro
@longcrawler
2 жыл бұрын
hmmm. interesting,...... still interested in your screwdriver ??, link please
@RoadsideRC
2 жыл бұрын
Here is the driver link: amzn.to/3Sfd9Ux
@longcrawler
2 жыл бұрын
@@RoadsideRC Thank you So Much....one more thing, it appeared you had some extra long bits..?? If so where did those gome from.
@RoadsideRC
2 жыл бұрын
@@longcrawler Here you go: amzn.to/3xuKQtl
@overdosed51
2 жыл бұрын
I honestly can't run anymore than 20% on any of my trail trucks. It's a real disadvantage while on those slick side hills.
@RoadsideRC
2 жыл бұрын
I haven't really found my threshold. My ECTO runs around 37% overdrive, and I still love it. My Gladiator is also roughly in that range, and it appears to do well. Seems like anything under 12% just isn't doing enough. I bet your 20% is a good balance for most folks.
@arkansasrcnewbie
2 жыл бұрын
Awesome! I am actually trying to figure out what i can do to get some overdrive in my vanquish portal axles. This was a huge difference!
@RoadsideRC
2 жыл бұрын
Too much of a difference, unfortunately!
@billyb5057
2 жыл бұрын
looks quite an upgrade mate interesting tests on the bench out on the course it looked better but maybe too much overdrive *full watch always 💯Au👍leaving a like*
@RoadsideRC
2 жыл бұрын
Thank you Billy!
@BigJimRC
2 жыл бұрын
Great video! Thanks for making the mistakes for us! The weight add I’ll do to my Base Camp, overdrive… nope… until you get it dialed in. Cheers bro!
@RoadsideRC
2 жыл бұрын
Happy to help! Overdrive is great - you just need to stay in the 15-30% range....not 75%!
@JonnieB.
2 жыл бұрын
Good stuff Troy! It was comical to see the front drag the rear around. It seems to just skid the rear tires down everything. It seems to perform like a “dig” function turning with that much overdrive.
@RoadsideRC
2 жыл бұрын
It basically is! You are right.
@jdtII
2 жыл бұрын
What if you take the overdrive out of the axle and leave it in the portals how much of a difference would that be
@RoadsideRC
2 жыл бұрын
I'd have to go back and look at the previous gear install video. Diff-only was around 12-15% if I remember correctly, so it would take that much back out of it. I have a milder set of portal overdrive gears I will use instead.
@johngookinsable
Жыл бұрын
love the mods. im picking up a set of these knuckles for sure. it solves two of my issue at once
Пікірлер: 42