You are the man! I cannot thank you enough!! I was telling the guys at R&H Hobbies what you built for me and they can't wait to see it ass well.
@ezboyrc553
8 ай бұрын
I can't wait for you to get it ass well. 😆 🤣
@EricsRC
8 ай бұрын
@ezboyrc553 I thought I heard you say you needed to make a splitter. I thought a while back I sent you some connectors and a no solder connector for direct power things like the winch from Holmes Hobbies.
@kevinbreaker2683
8 ай бұрын
Awesome love it, Great job👍🫡✨️✨️ Ready for the run video.
@justiceonly9105
2 ай бұрын
Hi, Do you still get the battery level with the hobby Wing system on your Spectrum radio? Thank you
@ezboyrc553
2 ай бұрын
I'm running a different radio because I switched to the two speed instead of dig, so i'm not sure, but i'm thinking that it goes through the receiver and would be okay.
@justiceonly9105
2 ай бұрын
Hi, Very grateful for you. What figure size in it please?
@ezboyrc553
2 ай бұрын
Marty mcfly is 7 inches. Most of my other characters are 8 inches, which is a little big for this truck.
@kellykuretich6366
8 ай бұрын
👍👍😎😎
@hellofromsoutheastalaskarc7517
8 ай бұрын
You need to be careful with the drill. Should just snug it down. Then hand tighten by hand. Or could break plastic parts
@ezboyrc553
8 ай бұрын
This drill don't have that much power.
@MillyAire
15 күн бұрын
Can I plug an 11.1v lithium ion battery onto it as last one blew up. Maybe wires crossed?
@ezboyrc553
15 күн бұрын
Yes it can run 3s battery. The only way it would burn up is if the main power wire, hot and negative.was backwards, when you plugged it in, and that's hard to do.. If you just bought it, they have a pretty good Warranty program You just have to send it to them, and they will look at it and see if they want to replace it.
@MillyAire
15 күн бұрын
@@ezboyrc553 did you keep the same pinion from old motor when changing to fusion?
@Buffalo1-k2u
8 ай бұрын
You’re some good at wrenching . Good job on all your projects 👍🏼
@hoosierbuddyadventures
Ай бұрын
Do you build those atvs often? That's awesome!!!!!
@ezboyrc553
Ай бұрын
Thanks. I have built a couple of them, and i'm going to build another one soon.
@hoosierbuddyadventures
Ай бұрын
@@ezboyrc553 how much you charge? I want one!!
@Cranklotus
7 ай бұрын
I have an scx10.2 could i use the reciever out of it? I bought the hobbywing and a new servo but not sure how to install it.
@ezboyrc553
7 ай бұрын
If it's a spectrum receiver it should work
@Cranklotus
7 ай бұрын
Its the one the Cj came with. 2 n 1. @@ezboyrc553
@ryand4786
8 ай бұрын
I just installed my first Fusion pro 2300 kv. Much easier than I thought, very impressive performance too. I also picked up an RC4WD 8274 winch, tons of pulling power. If I could afford it I would have a Fusion Pro in all my rigs
@ezboyrc553
8 ай бұрын
I would too if I could afford them. I only have one 2300kv Pro But I have 3 of the 1800kv FUSION SE Because they are almost as good for half price.
@ryand4786
8 ай бұрын
@@ezboyrc553 if it makes you feel any better , the 2300 KV costs $262 in Canada . Keep up the great work 👍
@Mickus79
6 ай бұрын
Hi, I’m installing the same motor. What mount numbers did you use to get it the pinion gear and spur gear to mesh properly ? Tia
@jvilla5
8 ай бұрын
Hello, your videos are very good. I wanted to ask you if you could give me the link to the wheel extension, which will be 12mm, right? thank you so much!!
@ezboyrc553
8 ай бұрын
Sorry. I don't have a link for these wheel extensions i've had them for many years. I always just look them up on amazon. There are plenty to choose from. They are 12mm hex's & About 15mm wide
@woodenshoe788
7 ай бұрын
I honestly don't know why Axial just doesn't make the 2 speed transmission a standard feature same as what Traxxas does. Why make people have to tear apart the rig in order to get this option going?
@ezboyrc553
7 ай бұрын
Absolutely agree. And even after doing the work , putting it in & not having a controller that will work 4 channels is just nonsense. Lol
@woodenshoe788
7 ай бұрын
Since you already have a TRX4, you can use that radio to control the jeep but you'll just need to pick up another Traxxas receiver. At least that way you'll have all the channels. I did that for my early Bronco last year. @@ezboyrc553
@Cranklotus
7 ай бұрын
And do ya need to take the transmission out to do just the motor swap? I plan on keeping dig. Thanks man!
@ezboyrc553
7 ай бұрын
No, you don't have to take the transmission out for just a motor swap. You actually only have to remove the fake engine off the top and 2 more screws. I think. The motor comes out very easy.
Пікірлер: 37