Glad it was helpful! Be sure to let us know what content you would like to see in the future.
@acerjuglans383
5 ай бұрын
Thank you for this! I have to check mine, i think i have a box type reservoir.
@AxiomprecisionCNC
5 ай бұрын
If you have the older square pump you will disconnect the spindle return line going to the small 90 degree fitting. Attach your drain tube to the fitting and lead it to your empty container. Activating the spindle will drain the lines. Then reconnect your lines and top off the coolant and let it cycle through the system for a minute. Top off your pump and reinstall the cap. You may want to do that twice to ensure you have cycled out most of the old coolant.
@dalejones4186
5 ай бұрын
Why do you ignore the older Axiom systems? They are still out there.
@AxiomprecisionCNC
5 ай бұрын
Dale we do have some content in the pipeline for some of our older Pro and Pro+ machines on the way. If you have the older square pump you will disconnect the spindle return line going to the small 90 degree fitting. Attach your drain tube to the fitting and lead it to your empty container. Activating the spindle will drain the lines. Then reconnect your lines and top off the coolant and let it cycle through the system for a minute. Top off your pump and reinstall the cap. You may want to do that twice to ensure you have cycled out most of the old coolant. If there is some content you would like to see for future videos please be sure to leave a comment.
Пікірлер: 6