Always enjoy watching other ZJ rock crawlers. Mine's on 35's, more of an overlander than a rock crawler. Although, she has completed the Rubicon quite handily.
@johnhill484
8 ай бұрын
Very impressive how good that ZJ is doing!
@yeraldocaces7411
2 жыл бұрын
Excelente videos off road!! Felicitaciones!! Muy buenos detalles de preparación del jeep que realmente funcionan!!
@HarryPotter-cz8hr
2 жыл бұрын
Got a 96 ZJ I6 im building up right now same color an all with the 60s front n rear. 5.38 full spool rear with 40s Yours is a beast I want that hydro too
@DrHavok1
6 ай бұрын
98 5.9 ZJ is one of the best vehicles ever made especially once you upgrade it like this
@ryandaly3948
3 жыл бұрын
That ZJ is an animal show!
@glencrichton1457
3 жыл бұрын
34 well spent minutes!!
@ridinhigh276
2 жыл бұрын
Straight beast mode brother 💪! Love the ZJ as I have been building and wheeing mine for years now. That's a pretty knarley trail I'm assuming NW somewhere?
@perlindqvist3003
Жыл бұрын
Nice Cherokee👍 Regards from Sweden
@matty86suk
2 жыл бұрын
You must get tons of tie rod roll with that steering setup
@edapps1721
2 жыл бұрын
Yes. The hydro assist made it much better. On the plus side it has zero bumpsteer
@AGuyandHisProjects
2 жыл бұрын
Looks nice dude! I just started a build series on my 94 zj on KY channel. Probably not looking to go 40" but most likely 37's for now. How top heavy do you feel with the 9" lift?
@sparkie5571
2 ай бұрын
what axles are on there? the jeep looks fantastic
@a2js2
2 жыл бұрын
I'd like a walk around
@elchiefx4
2 жыл бұрын
👍Good trail🏁 saludos desde Tijuana MX✌
@2007bluewolf
2 жыл бұрын
Se ve impresionante.. felicitaciones. Cuanto levante tiene? Cambiaste los ejes? Que kit de brazos de suspensión pusiste?? Gracias y Felicitaciones nuevamente
@09kokanee09
2 жыл бұрын
La elevación es de alrededor de 6 ", los ejes son dana híbridos de los años 60. Sin kit, todos los enlaces están hechos en casa con juntas Hiem y tubos DOM. Nada "atornillado" en este ZJ, todo es personalizado. Enlaces, parachoques, placas protectoras, deslizadores , etc., todo hecho en el patio. Este no es mi equipo, estaba filmando ese día, el tipo que lo construyó es un amigo.
@breakitbillk5429
3 жыл бұрын
Hell yeah man
@cgscprspecialist3937
2 жыл бұрын
Super rig
@longhaulerjatts
Жыл бұрын
We made to the stave lake point on stock zj & nissan
@yurisilva8710
Жыл бұрын
I would like to know which axle this zj is using and the marking of the wheel and tires thank you
@VenturaIT
3 ай бұрын
does it have a locker?
@blueeyedad
2 жыл бұрын
Hello what springs do u have? I'm allso in bc live in surrey 5.9 zj long arms 7 inch lift tj rubicon axles and tcase on 37s
@TattedTommysTv
Жыл бұрын
What axles you running my wj brotheren
@moshesuharianu8688
3 жыл бұрын
Suspension works nicely with these big tires,why front sway bar connected
@09kokanee09
3 жыл бұрын
No reason for the sway bars to still be connected, we drove it 150klm to the trail and was just too lazy, if they needed to be disconnected on the trail we would have, it just performed really well so we didn't bother.
@moshesuharianu8688
3 жыл бұрын
That means the sway bar is too weak for for Dana 60 which is much heavier then the d30 and won’t do its job on highway Had same problem with mine after d60 install in front,mine was more pronounced because I still have the short arms
@09kokanee09
3 жыл бұрын
@@moshesuharianu8688 It performed great on the highway. 350+ klm round trip.
@jesterofatlas5749
2 жыл бұрын
I want details for fitting 40's on a zj
@elchiefx4
2 жыл бұрын
Nice cars🏆, Jeep power 🏞
@immelting9834
2 жыл бұрын
Gear ratios , axles specs ? please
@edapps1721
2 жыл бұрын
60s. 35 spline chromos. Lockers. 4.88s
@juanmaldonado4111
2 жыл бұрын
I want to run 40s on my Ajax, but do I have to swap the axles?
@Switching-Cars
2 жыл бұрын
Verry good driving but you need a new spotter
@Pajero.m57
3 жыл бұрын
Nice Jeep ! Which axles and ratio? Thank you
@09kokanee09
3 жыл бұрын
Hybrid 60s.
@jayceandjeremysadventures.4441
2 жыл бұрын
More ZJ
@tliggexperience
2 жыл бұрын
Flowmaster exhaust?
@VINNY5674
2 жыл бұрын
ZJ's take a licking and keep on ticking...
@whitetrashxj
2 жыл бұрын
Narrowed superduty diffs?
@edapps1721
2 жыл бұрын
Full width and 2” spacers
@bigshelter
3 жыл бұрын
What area is this ?
@09kokanee09
3 жыл бұрын
Mission.
@2rkh
2 жыл бұрын
I'm getting ready to put Jeep Wrangler JL axles and 40's under my ZJ. I've already trimmed as much fender as I can. How much lift did u put on yours? Did u move the front axle forward and the rear axle back? If so, how much? What kind of offset & backspacing do u have? Thanks for any help u can give me.
@edapps1721
2 жыл бұрын
About 9” of lift 2.5” stretch front and rear
@edapps1721
2 жыл бұрын
Full width tons with 2” spacers. 6” backspace wheels
@2rkh
2 жыл бұрын
@@edapps1721Stock, the spring perches are directly over the axles. Did u weld the spring perches on the back side of the front axle and the front side of the rear axle to keep the springs verticle? Thanks again.
@edapps1721
2 жыл бұрын
@@2rkh the factory perches are actually not centered over the axles. I moved the rear perch location on the axle and moved the upper on the front frame side forward and out
@2rkh
2 жыл бұрын
@@edapps1721 Gotcha. Thank you for the info. I have a buddy that is a mechanic and will be doing all the work. He said he's not sure if 40's would fit or if it would be drivable on the street. So I sent him a link to your video. Lol. Thanks for your help.
Пікірлер: 49