I love my Baby Brownings. I've got a pair of these. A 1959 model and a 1967 model. The 1967 is basically new in the pouch. I don't think it's ever been fired. I had the 1959 model completely rebuilt by PSA (Precision Small Arms - Licensed manufacturer of Baby Brownings here in the US) That 1 gets carried occasionally. The guns are far more accurate than most of us can appreciate. They're so tiny and the sites are so small they're difficult for people like me with large hands to shoot to them to their full potential. At 7-10 yards I can easily keep all 6 rounds in about 1''-2'' depending on lighting and the accuracy Gods that day. I also have a Ruger LCPII 380 that I carry and a KelTec P32 too. The gun I carry depends on how large of a gun I can carry that day. On the days where I need the smallest gun possible the nod goes to the Baby Browning. Most days though I carry a 9mm or 40 S&W
@HillbillyMusings
2 жыл бұрын
I'd love to get my hands on one of the PSA babies :) I agree 100%, if you have larger hands these things can be a bear to shoot. Thanks for watching!!
@Chainsaw2373
10 ай бұрын
Yes you can buy a baby browning these days used of course and a plain blue one is not all that expensive but some of the engraved ones and gold plated ones are pretty expensive. Mine is just a curio piece that I have fired one time just to see if it works and it lives in the safe.
@HillbillyMusings
10 ай бұрын
Thanks for watching!!
@grahamohea2424
2 жыл бұрын
A Baby Browning is on my bucket list
@HillbillyMusings
2 жыл бұрын
Keep you eyes open, maybe a deal is to be hand on one. Thanks for watching!!
@frankbrowning328
2 жыл бұрын
Sometimes they can be had in very good condition for $400. I've got 2 and the last 1 I bought was 3yrs ago. Bought it on Gunbroker for $350. All parts are readily available and PSA will do a total rebuild if you like. I had 1 of mine rebuilt top to bottom by them. If you're looking for a pristine example they get pricey quick. My 1967 model is in new in the pouch condition and today would go for around $700-$800
@blackhawk7r221
2 жыл бұрын
Just make sure to get ammo that has a decent taper crimp. If there is too much case lip sticking out away from the bullet, it will hang up.
@HillbillyMusings
2 жыл бұрын
Good advice, Thanks for watching!!
@everettwalker9048
10 ай бұрын
Absolutely true. The speer gold dots are crimped and functional right out of the box. Most factory ball loads need to be run through a crimp die for total eliability. Your are the only other writer that has mentioned this that II am aware of. I've found the practice necesary with the Walther P series in 32 also. The semi-rimmed cases come to a stop against the case mouth if it has no taper.
@blackhawk7r221
10 ай бұрын
@@everettwalker9048 Let’s keep spreading the good word.
@everettwalker9048
10 ай бұрын
@@blackhawk7r221 My current .25 is a near-mechanically new Colt 1908 made int 1922. -the most copied .25 model. You can g-search 25 auto rag-time wonders. I think you'll like it > I know I did after I wrote it.
@everettwalker9048
10 ай бұрын
The baby browning came out during a competition to find out who could design the smallest 25 auto. Designed by Saive-the guy who came up with the Hi-Power. Wather won that one.
@joemorganeatmyshortschannel
2 жыл бұрын
Love pocket guns I collected hundreds between the 1900 to 1990s era
@HillbillyMusings
2 жыл бұрын
Howdy Joe, I too have a soft spot for small pocket guns :) Dunno why really, but they are by far my favorites. Hope you are doing well sir, Thanks for watching!!
@joemorganeatmyshortschannel
2 жыл бұрын
@@HillbillyMusings my soft spot is because they used to be a cheap miniature version of a nations service pistol in alot of cases and we are doing well life is about same as always taxes finally came in so I paid off the hundred bucks I owed on my upper I'm sure glad I got that done when I did saved me like 300 bucks
@Rumpleskin
2 жыл бұрын
Always wanted one.too cool
@HillbillyMusings
2 жыл бұрын
Thanks for watching!!
@ElCineHefe
9 ай бұрын
What does the lever on the other side of the frame do? Is it an ambidexterous safety, or a trigger bar or what? What is it?
@HillbillyMusings
9 ай бұрын
Its a trigger bar of some sort, slides back with the trigger pull. Thanks for watching!!
@ElCineHefe
9 ай бұрын
@@HillbillyMusings Thanks! Nobody ever points out its function in videos.
@voxfan7403
11 ай бұрын
So much for gun safety. This guy constantly muzzles himself.
@HillbillyMusings
11 ай бұрын
Thanks for keeping an eye on me and Thanks for watching!!
@danieldagu7921
Жыл бұрын
I really I need this gun
@HillbillyMusings
Жыл бұрын
It's an awesome little gun, Thanks for watching!!
@danieldagu7921
Жыл бұрын
Were are you saling
@joshuasutton4043
7 ай бұрын
Gun broker has them used I bought couple 25s off there
@Jad3Kingfx
Жыл бұрын
Bro talking 17mins about the gun & does not shoot it 🤦🏽♂️
@HillbillyMusings
Жыл бұрын
LOL....Thanks for watching!!
@454FatJack
4 ай бұрын
NFA 1968= too dangerous for American people. Stay safe Yank 🏳️🌈🫡
@HillbillyMusings
3 ай бұрын
LOL...Thanks for watching!!
@user-bl8xj9vd3t
9 ай бұрын
chúng tôi chỉ cần xem kết cấu và cách hoạt động của khẩu súng chứ không cần nghe bạn ngồi nói như một chú vẹt.. các bạn thật là thích nói và nói quá nhiều.vi điều này sẽ làm cho ít người đăng ký kênh của bạn
Пікірлер: 34