Big thanks to y’all for helping me out with the new shop! Always happy to have the help from guys who actually know what they’re doing 😂
@vidalnunez4507
2 жыл бұрын
I left my dad's business partly because my brother and I couldn't work together... it's inspiring seeing brothers working together, seeing how I might be able to hand off a business to my children.
@diceonamay
2 жыл бұрын
You sound like a little child. Grow up
@PerkinsBuilderBrothers
2 жыл бұрын
Thanks Vidal! Jaime and I have strangely always got along and I actually enjoy having him as a business partner. We were the only two people to be employed by our dad for more than a couple of months! He worked everyone pretty hard 😉
@jamespppyacek342
11 ай бұрын
I'm a carpenter of 40 years. My brother would hire someone to hang a picture. He's never used a drill.
@1bikepiper
2 жыл бұрын
The Perkins Brothers and ALL of their workers, (which are really like family to Erik and Jamie) . Are very genuine people. I really appreciate them adding me in their video. If I was as photogenic as them I may consider doing carvings. But I'm a relatively new Carver and will stick to being in the shadows for a while. These guys are truly great guys. Thanks Perkins crew !
@MrBill3474
2 жыл бұрын
Jesse, is there a way to get in touch with you directly? I may have a piece I want commissioned if you’re interested. Thanks.
@Finman78
2 жыл бұрын
Another pro tip when cutting bevels. The length of the bevel (if it’s a 45 degree) is the same as the width of your stock. So if you’re cutting a 45 bevel on 3/4” stock, the bevel length adds 3/4” of an inch. This is handy because it’s easier to lay out and mark long points rather than short points. So if you need a 20” 2x4 with a 45 bevel on both ends, you can cut one bevel, hook the long point, mark 23” (1-1/2” + 1-1/2” + 20”) for the long point of your opposing bevel. Your short point measurement should be exactly 20”. This only works with 45 degree bevels though!!
@bigdbob7929
2 жыл бұрын
'miters', a bevel would be on the side of the meterial, not the face
@Finman78
2 жыл бұрын
@@bigdbob7929 I’m talking about a bevel, not a miter.
@MatHelm
2 жыл бұрын
Pro Tip: String twine in the window openings to brace the plastic/house wrap... And even tape the twine to the back of the plastic for more strength/wind resistance.
@michaelc.3812
Ай бұрын
I know this video is over two years old, but here is a pro tip: when you have insulation in a wall, as is the fireplace, you can use small steel wire and screws on each stud and wrap the wire in the screws and go from side to side. Better than that is to use that steel support tape (plumbers use a lot of that) and screw in studs on the walls behind firebox. Don’t forget to run a strip (or wire) about every 12-16 inches going up the walls. Either method will hold the insulation for the life of the home.
@landmarkcreations1183
2 жыл бұрын
At 12:20 the problem is nowadays it’s hard to get anybody to care or have customer service about anything. We deal with the same stuff where we’re at
@dwb73
2 жыл бұрын
A lot of people end up regretting high TV mounts. After just a few weeks they find it's uncomfortable on their neck and shoulders to sit at normal level and look up to watch. There are formulas for distance from the floor to the center of the screen based on screen size. Your client wants it over the fireplace so you don't really have any options.
@PerkinsBuilderBrothers
2 жыл бұрын
Good comment… I personally prefer a TV that is about 4 1/2 feet to the center off the floor.
@jailbreak852
2 жыл бұрын
It's alright if you're in bed, but you'd usually like it close to eye level
@JasonKrasavage
2 жыл бұрын
@@PerkinsBuilderBrothers i would suggest a “mantle mount”. Check them out. They allow you to mount the tv up above the mantle but pull it down a significant distance for viewing
@chorgzent.3978
2 жыл бұрын
"special thanks to Johnny Brook for keeping us busy" such a humble take on helping a bro no cap 🔥
@animefreeges4801
Жыл бұрын
this is my first time hearing someone say 'its monday and im excited'. humans evolve i guess thats what it is. love ur vids.
@emerybarg6424
2 жыл бұрын
Oh the good old track meet. My son runs the 800 in college. He did the 4x800, the 800 and has done the 2 mile all in one meet before. He wasn’t happy about the last one. LOL
@Urannshi
2 жыл бұрын
No clue how I came across this series but I'm invested in it now. For tripods, it's helpful to have ones taht have a hook beneath them so you can put a weight on them. This helps keep them steady, especially in the wind. For the more creative places, if you don't already have one, a joby gorillapod is quite handy. I use these decently often when doing photo and video work. Keep up the good work!
@mattsteve4297
2 жыл бұрын
woodworking and art is two thing can't be apart
@Sailor_Greg
2 жыл бұрын
Living up here in Canada, where fireplaces work pretty hard with logs, the idea of a vent-less fireplace gives me the heebie-jeebies. Great episode, great content! Keep up the good work!
@matth7650
2 жыл бұрын
Bronco Reechcraft All Terrain Scaffolding. We use these on all of our roofs and rough terrain for framing and siding
@janelewis7747
2 жыл бұрын
Work ethics of all you gentlemen is outstanding 👏
@milesharlan1
2 жыл бұрын
Thursday afternoon video from PBB..This will be a great video for lunch time enjoyment!! Thank you guys!! Keep up the good work!!
@PerkinsBuilderBrothers
2 жыл бұрын
Thanks Miles
@T.E.P..
2 жыл бұрын
It's been a HUGE gift from you guys having sooo many great channels here to enjoy. Crafted Workshop, RayJay, Building Knowledge Channel and of course your glorious channel the PBB!!
@ismaelmaganajr.4238
2 жыл бұрын
Greetings from Central Coast California. I am a design professional who works for an architectural firm. Big fan of your channel! I do want to share, I just broke ground on my personal custom home that I was blessed to design and now able to see it constructed. All the best, Ismael
@jaimeperkins9606
2 жыл бұрын
Sounds like a good time! Congratulations
@dudemynameisgio
2 жыл бұрын
Hey guys, im a sider / finish carpenter for a construction company. Try using Stinger cap staplers around the windows if its really windy or if you dont want to buy/try out Stinger products then you can use the old school way of shooting temporary lathe on around your windows and doors with an 18GA or 16GA brad/finish nailer to hold on your housewrap in the wind. HOPE THIS HELPS IN THE FUTURE! You guys are doing great keep up the good work. I always look forward to your guys content.
@PerkinsBuilderBrothers
2 жыл бұрын
Thanks Gio!!
@christophergarland5891
2 жыл бұрын
So when we install house wrap we use a pneumatic stapler that will hold two clips of 3/8” staples and you just pull the trigger and it will just keep shooting. Interchange makes the gun and it sets the staples so the house wrap will not come off. Just make sure of who is operating the gun because you will go through a ton of staples. Saves a lot of labor. Love the videos.
@royalconstruction8032
2 жыл бұрын
Excellent table saw choice, we’ve been running that for a few years now. No complaints.
@jamesweeg6545
2 жыл бұрын
I have the same job site table saw. I never knew your could extend the fence like that!! Pro-tip of the day!
@TeToruFarms
2 жыл бұрын
Should be able to swap fence to left side of blade to. Though I'm in NZ though the model number is the same .
@user-uz5ne2lw4y
2 жыл бұрын
Ребята вы супер. Приятно смотреть как вы работаете. Делитесь опытом, шутите. Успехов в вашей работе. Так держать
@shaneoakley8757
2 жыл бұрын
That’s an excellent site table saw. I use mine all the time.
@danielgeng2306
2 жыл бұрын
Love me some Perkins Brothers but Jason brings a lot to the party, lol great sense of humor, love me some Jason too ! lol
@stitch_u_ation
2 жыл бұрын
thank goodness you guys have been helping out and filming at Crafted Workshop - after a 2 week hospital stay I wasn't board waiting on surgery. Keep up the good work. And I love that sofit.
@jaimeperkins9606
2 жыл бұрын
Thanks for watching! I hope you are doing well now…
@drewbacon1405
2 жыл бұрын
Been looking forward to that Cardinal Coffee update!!
@hilux0094
2 жыл бұрын
If I want house wrap to stay on I just use scrap lumber as a cleat to help hold it on. 2x2s and other rips of plywood usually takes care of the wind whipping the house wrap off.
@PerkinsBuilderBrothers
2 жыл бұрын
We’ll have to do something different next time! It was on the house without getting covered with siding for way longer than we expected, and also we got the craziest wind I’ve ever seen in my life over the last month here
@mw7145
2 жыл бұрын
Cap staples help a bunch as well. Stinger is the brand I have used.
@dabeamer42
2 жыл бұрын
Re: getting the bones of the house on video...that was one of the features of the new house I'm in now. The builder let me in to do videos of the frame, the rough plumbing & wiring, etc. Having that has been very helpful for lots of little improvements I've done. You should think about doing some extra, and giving it to the homeowner once you're done. So they know where all the wires are, etc.
@AllstarVentures
2 жыл бұрын
Pro tip= use old couch cushions to keep from marking shingles and hold ladders, materials , workers in place. They are great anti skid!
@edpow
2 жыл бұрын
Kyle at RR buildings showed a trick where he stapled though cardboard to keep the house wrap or vapor barrier attached better
@ashleymccarthy6232
2 жыл бұрын
Great to see you back on the job.
@woodmylife
2 жыл бұрын
Great work, thank you for sharing.
@davidweeres797
2 жыл бұрын
... you guys should check out the skilsaw table saw! A worm drive table saw is genius, the power on it is unreal!
@smcox1991
2 жыл бұрын
The good thing is you’ll be able to watch the tv in the living room comfortably from the loft 😂
@jim4utube
8 ай бұрын
Thanks for showing that feature about the table saw rip fence. I have a Dewalt table saw and knew about extending the rip width but didn't know about the flip down feature on the fence.
@jonathanconway7256
2 жыл бұрын
Pro tip Any paper faces batts need to be covered by drywall or wood per code. Foil faced batts are what I usually use behind a fireplace insert because my inspectors always want a vapor barrier on the insulation.
@AsHellBored
2 жыл бұрын
The fireplace is nice for christmas, but honestly I would have just setup a battery backup for the furnace. its a 15A circuit and it doesnt even use all 15A for the squirrel cage. (unless you guys have gas outages) Those ductless faceplaces say they dont emit carbon monoxide but its BS. There is a CO safety trigger, and WHEN it triggers, you got ZERO heat.
@ryanjohnson8152
2 жыл бұрын
Thanks for showing me a new feature on a saw ive had for a year now lol
@aaronstone5899
2 жыл бұрын
I've had the the same table saw for about 6 years it is great
@myworld8266
2 жыл бұрын
I loved that comment " I work I don't video tape" haha brilliant come back, Perkins crew he owned ya ass with that one.
@antoniobenitez8071
2 жыл бұрын
Sorry to hear that bro, i had the same situation with mine as well, this team here is what you call teamwork “ all the way “some people don’t know what that means unfortunately
@CCTOutdoorServices
2 жыл бұрын
These types of videos are the reason why I keep doing my concrete videos !!!
@Toxic_0_
2 жыл бұрын
You guys need to get one of those chainsaw carvings made for the house
@zwelidlamini7544
2 жыл бұрын
Jason,"you work harder, we work smarter".😂😂😂😂
@bakesee
2 жыл бұрын
We would tack 1x2 strips on top of tyvek to keep it from blowing away…
@AllenandLorie7733
2 жыл бұрын
Missed these videos! More! We need more! Lol
@tylermundy7985
2 жыл бұрын
Thanks for the great content! Awesome to see you guys building this home again.
@austinveal9187
2 жыл бұрын
I live in Des Moines, IA. It was a heck of a storm that hit us. I wasn't near the direct tornado that hit, but I have family that was and it was insane. Hopefully things will get back to normal soon.
@philsshed
2 жыл бұрын
Here in Australia when we wrap we then use the blue packing strap and nail that down vertically roughly 450mm apart.
@FredD63
2 жыл бұрын
Natural gas fireplaces here the inside of the chase has to be insulated then covered with fire board and sealed with fire caulk along with a fire stop at ceiling height …. Then the venting out has certain requirements to pass code as well
@marca1812
2 жыл бұрын
Thank you for all your videos. I enjoy watching them. Be very nice to your neighbour Jesse. No doubts that he makes great sculptures and I am sure that he is a great guy, but you don't want to mess with him. Look at the logo on his t-shirt and his hoody. Thank you for your service!
@PerkinsBuilderBrothers
2 жыл бұрын
Thanks Marc
@1bikepiper
2 жыл бұрын
My pleasure... I'm harmless tho.
@andyaustin2824
2 жыл бұрын
The siding guys up here in Minnesota use those scary pump jacks to get the siding on the planks for them are pretty narrow and are super sketchy when over 10 feet up. Looks way easier to use ladders on the roof like you do
@jaimeperkins9606
2 жыл бұрын
Those pump jacks scare me…
@MaggieGueder
2 жыл бұрын
Jason is correct, pieces of wood on top works perfect for strong wind
@jamesmcfadden5214
2 жыл бұрын
On the topic of house wrap. You guys need to use a pneumatic button cap nailer, nailing on every stud and plate if necessary. And a few extra in the field
@doritleis2773
2 жыл бұрын
Jamie is Happy with the new Transportable Circular Saw. And this Day a great Consignments. All Workt with Speed. It's much Work to happen. Greeting 👍🇦🇹
@donovandavidsonAlton
2 жыл бұрын
Well done getting the job done its been emotional good to have you back UK
@AverageDadBBQ
2 жыл бұрын
It's really remarkable how COVID has impacted the supply chain on almost everything. Its very difficult to find comparable alternates when nearly every manufacturer seems to be in the same boat. It's been a struggle on several projects I'm involved with. Glad you were able to make the new firebox work with relatively minor framing adjustments!
@flyingjackcarpentry9394
2 жыл бұрын
As all builders know, you gotta knock a few things down to "Build Back Better". There'll be no room for small self employed businesses in the post-covid world. We've been lucky so far, despite the supply issues and insane price hikes. But we've only been lucky because nobody could splurge their money on fancy vacations. They splurged their money on home improvements instead. Now the next few years are gunna burst everyone's bubble. Fuel, food and utility bills are gunna make everyone think twice before they spend their money on luxuries.
@MrTimequake
2 жыл бұрын
No lie. I've been trying to get brick vaneer that goes on the front of the brick foundation for looks. Like what they (this crew) used on the fireplace on the last house. I can't seem to find it at Lowe's and idk where to go. Idk if it's a supply issue or my being an idiot. I just can't find it.
@Ree33ee
2 жыл бұрын
@@flyingjackcarpentry9394 Yuppp. You will own nothing and you’ll be happy. Destroying the dollar so everything is digital. Destroying fossil fuels so everything is electric. And guess what happens when you post something mean about the government on Facebook? Your car will be shut off and your bank account locked.
@tbone9347
2 жыл бұрын
@@flyingjackcarpentry9394 elections have consequences. thank the liberals for all of this.
@flyingjackcarpentry9394
2 жыл бұрын
Please explain how. I'm listening
@eaglestoneworks9572
Жыл бұрын
That DeWalt is the best on the market. Accurate right out of the box and it doesnt move.
@Beandiptheredneck
2 жыл бұрын
I heat my house with a gas fireplace, but its like a Woodstove, it stands alone. It has a blower but works fine without power anyway 👌
@waterislife.9204
2 жыл бұрын
Beautiful home you're all building.
@ronaldvella5561
2 жыл бұрын
love watching this perkins builder brothers over ray and jay any day i haved learned a lot here thank you
@williamstegich3571
2 жыл бұрын
You gotta take a play from RR buildings and staples little pieces of card board to the house wrap, it gives it more surface area to hold it, maybe you won’t have to do it 3 times…but then again, job insurance?
@0815419
2 жыл бұрын
just cut paper into strips of 3cm and staple it on the warp. tear the strip once its stapled to get a square 3x3 cm. so one stripe can serve 10 staples. the paper prevents the staple to tear through the wrap.
@antonvink
2 жыл бұрын
Exactly this, or use EPDM rubber washers.
@clydenakashima7393
2 жыл бұрын
Have you thought about purchasing pump jack scaffolding. I believe it would be easier to set up when the house is close to the property line and you don't have to set multiple level of staging to reach areas of the wall. The only thing you have to remember is to drive long lag screws for your brace to solid lumber.
@jaimeperkins9606
2 жыл бұрын
I have used some but we don’t have any like that.
@ThatGuyExperience
2 жыл бұрын
Ok, so I own a landscaping business south of Nashville. Grass is my thing. Also got my contractors license in 2019. Just not using it because I don’t know how to build a house. That’s why I watch y’all 😬 as far as your lawn, aeration and overseeding with a fescue/bluegrass mix seed in the spring and fall with a regular fertilization and weed control treatment plan are your first go to’s for a thick green lawn. Equally as important is a regular mowing routine cut at the correct height. You can’t cut cool season grass short. It will die in the summer heat and you’ll be left with not much. Do not cut your grass below 3 inches. I prefer a 4 inch cut mowed weekly. Love you guys and what y’all do. I hope to be as great a builder as you guys are one day.
@jaimeperkins9606
2 жыл бұрын
Hey thanks for watching and for the great lawn tips! I love a nice yard
@ariannaprest7606
2 жыл бұрын
I just love waking up to a new video from you guys!! Thank you for posting today ☺️
@dannymontes4110
2 жыл бұрын
I really enjoy every single video that you guys share , in wich I have learned a lot since I come across your chanel, so I wanna thank you for that. Keep up the good work.
@PrinceOfMidtown212
2 жыл бұрын
90% chance you broke fire box trying to get it in back seat 😂😂😂
@dannyrubinosky2050
2 жыл бұрын
Neighbor Jesse should do a bear sculpting time-lapse. It would be worth watching.
@conorgarvey6594
2 жыл бұрын
i love the the way ye have gone from advertising from growing hair , to growing lawn seed quite the Segway lol
@brianhubbard6423
2 жыл бұрын
Take care gentlemen and God bless.
@healjah2883
2 жыл бұрын
Hey team! Great video as always! The way i measure off the short point of a 45 deg cut is by either knifing or plunging 1 or 2 mm of material out right where the 45 meets straight. Hasnt failed me yet! Happy building!
@tjshine8022
2 жыл бұрын
Great to see you guys back to work!!! I was gonna hire you to come build for me in Prescott!
@grahamstefaan
2 жыл бұрын
The housewrap would stay on if you used the preferred button tip fasteners. Staples stink. Or better yet 30# felt and button tip fasteners.
@emilechap8573
2 жыл бұрын
Thanks guys for taking the extra time to do the videos. Great stuff , good work and tips. Thanks. Jay is really funny
@theptownpunk
2 жыл бұрын
Another great video loved the part with the sawdust and him saying we work smarter had me rolling, love you guys wish I had that view for my office been installing sheetrock for a firewall in an attic so nothing to write home about but at it's honest.
@danhunik7949
2 жыл бұрын
For high wind and building wrap try putting it on with roofing nails.
@carolewarner101
2 жыл бұрын
Dang... Must be sooo frustrating to have all those delays and things you were counting on having not being available. And then something finally arrives and it's broken! Hang in there.
@JSRRADIO
9 ай бұрын
Wait.. in a few videos before this yall were installing siding but now your doing it again in this video.. oh don't mind me just re watching this series becuse it's freaking awesome
@Beandiptheredneck
2 жыл бұрын
I get the building wrap pain, I've strapped the walls with scrap plywood and 1x2 to hold it on in high winds before
@MikeTheMass
2 жыл бұрын
I have the European version of the same saw (DWE7492), really pleased with it. Only downsize is that this version has a different arbor (nut) size. Bore size is 30 mm with the help of a reduction washer. Can’t use any 5/8 blades (like dadostacks).
@justindoyle4456
2 жыл бұрын
I think someone is telling you a line about the Pella plant. A guy that works there said they have no damage
@coalhillcustomcabinets2663
2 жыл бұрын
Awesome video! Glad to see you back to work. The supply chain has made everything difficult. Way to think outside the box.
@RandysRides
2 жыл бұрын
Meaaaahhhh....that's the sound of a ten blade gang saw. :P Those chainsaw carvings are awesome !!
@drewbacon1405
2 жыл бұрын
I hope your son had a great meet! As always another great well put together video filled with great inspiration and information!! Keep up the great work guys. That chainsaw artwork is awesome as as well Jesse should start a channel if he hasn't already!!
@Billybob-go8hn
2 жыл бұрын
Metabo has damn near the same table saw with stand for 300 bucks cheaper, I think it’s better but there both good.
@jamespppyacek342
11 ай бұрын
Yeah, glass doesn't burn, but melts. Genius.
@mikeh4068
2 жыл бұрын
i love what you guys do!!!1
@andrewfleming5666
2 жыл бұрын
Love these videos. So many tips I use on my own job
@843_operator5
2 жыл бұрын
I always get excited when y’all post a video! Love you guys!
@T.E.P..
2 жыл бұрын
Cardinal Coffeeee!
@PerkinsBuilderBrothers
2 жыл бұрын
thanks for the coffee!
@T.E.P..
2 жыл бұрын
@@PerkinsBuilderBrothers great ending to the vid showing the incredible chainsaw sculptures and bringing it full circle to the sawdust. I'd like to see more visits to him on the channel when possible.
@johnnyportugal2477
2 жыл бұрын
Put that sound track through my veins it’s the best
@tonyaddy7825
2 жыл бұрын
I love the new caulk gun you are trying out !! I remodeled my bathroom use it in some tight spaces worked Great!! I live in Des Moines area and we had a lot of tornados that week... sorry about the windows.. bummer!
@rhondakennedy819
Жыл бұрын
Tips are wonderful
@jamespppyacek342
11 ай бұрын
Heyyyy! Look at that! A hammer-tacker!
@philipmiller5202
2 жыл бұрын
Glad your back on the jobsite
@c.a.g.1977
2 жыл бұрын
Phew, I hope the people at the glass factory are all right! Bummer though that you guys had to stall all your work, but that's part of the builder's life I guess? Luckily you could help out Johnny with his new workshop!
Пікірлер: 343