Great video, I hope that the camshaft on the one mower That's locked up isn't to damaged from the cam decompression lever coming out, but I'll find out. LOL! It's my nephews mower, so he'll get to see what ticks inside one of these engines. Thank You for sharing 👍
@dvasq1033
Жыл бұрын
Excellent work.
@Zekerose
Жыл бұрын
Thanks for the video!!
@MechEngineer150
3 ай бұрын
thank you so much
@WeekendHobbyMechanic
3 ай бұрын
You're welcome!
@nirenorie
Жыл бұрын
Thanks putting this out here. You mention not to use an aftermarket cam. Can you suggest where to source a legit cam.
@WeekendHobbyMechanic
Жыл бұрын
Buy one from Briggs. John Deere dealership is usually more expensive. Try amazon but make sure it OEM from Briggs
@davidellis7695
Жыл бұрын
Good job. Don’t forget to add oil!
@WeekendHobbyMechanic
Жыл бұрын
👍
@jmar2229
Жыл бұрын
Thanks for the videos.. Having the same issue, When you take the rocker cover off to diagnose do you have to drain oil ?
@WeekendHobbyMechanic
Жыл бұрын
You don’t need to drain the oil.
@Lovinflyindrones2022
Жыл бұрын
I just subscribeded to u maté Weekend Hobby 😮Mechanic. What causees the composite release to fail like at It seems to be a common manifest with the Briggs & S engine???
@WeekendHobbyMechanic
Жыл бұрын
Poor maintenance. Oil change every year and check your valves.
@ChevyKing311
3 ай бұрын
How do you find what camshaft you need. My numbers don’t line up with anything
@WeekendHobbyMechanic
3 ай бұрын
17.5, 19, 19.5, 20 and 21hp single cylinder all use the same camshaft.
@davids44rabbitt8
8 ай бұрын
Trying to figure out what camshaft I need... I was going to order it on amazon
@WeekendHobbyMechanic
8 ай бұрын
Don’t buy aftermarket. They don’t last. If u buy one from Amazon make sure it’s made by Briggs & Stratton.
@jmar2229
Жыл бұрын
is the bolt on the starter normally loose when the starter is disconnected?
@WeekendHobbyMechanic
Жыл бұрын
Bolts are never loose.
@stevecurry5785
2 ай бұрын
Seems the briggs camshafts are back ordered for a year and all i can see on amazon is the Chinese kits With 30,000 thick gaskets when it should be 15,000 thick crankcase gaskets with them When the cranks end play is sposed to be 002 to 025 Go figure
Пікірлер: 27