Even though that thing is broken as hell I think it would still be worth rewiring if you have new shells for it, if you still have the thing
@jobeanvideos
4 жыл бұрын
It's been parted out to use for parts, a yellowed v2 is never worth rewiring trust me, the spring holders were about busted as well.
@electrictnt4482
4 жыл бұрын
@@jobeanvideos yeah if the spring holders were gonna snap that's pretty bad
@electrictnt4482
4 жыл бұрын
@@jobeanvideos i recently rewired a kinda yellowed one myself and I'm working on a red one now.
@alfredogonzalezcuevas1641
Жыл бұрын
El🤔
@TheAllPowerfulMugKing
6 ай бұрын
these bad yellowed v2's should be worth 2$
@Cyperstudio
8 жыл бұрын
I spent 50 dollars on a discolored one and the arm cracked because of the terrible packing on the sellers part.
@Ambush-real-steel
Жыл бұрын
I bought an yellowed v2 but it was working and only costs 5 euros thats like 5 dollars it was cheap but i never started him just 1 time the hand broke i mean the sensor wing
@cajundude62a
2 жыл бұрын
oh yah those hands definitely ruin the whole balance so agree fixed my blue one its the 2016 blue and the arm sensors where striped which led to a dead walking motor it was a pain took me four years to finally take him down fully and replace the entire motor and wire cable those wire cables are great source but once the wires come off completely they're done that's another problem it be much harder to repair the arms now that they're black and bleu wires which are very hard to find about the gluing tips thank you that helps with the walk motor oh And instead of springs use parts with holes and screw them into the legs that's how I fixed them with the legs
@TheAllPowerfulMugKing
Жыл бұрын
I know these yellowed v2's are shitty as fuck. I got one on christmas(second v2) and it only lasted like 10 minutes. i made it dance ONCE and the left arm broke. then a few minutes later everything started to break. these things are really shitty but with the coloured ones these don't happen with the shells but the bad wires get to them. i used a red for a few weeks and it lasted a bit. the only thing was the crouch sensor broke and neither Me or my parents could fix it. I might consider getting a black or a 3rd Gen white v2 if my parents let me.
@cajundude62a
2 жыл бұрын
yah about those legs all you need is a long piece the right size and with 2 holes at the right place found a part while I was in school those springs suck so I actually used something totally different that was metal with 2 holes that where at the right length and springs should've ben only in the arms and they should've used way stronger motors I know I did it walks just fine without them those waist springs where just to support it because they used weak motors to begin with which they shouldn't have in the 1'st place then Those arms are definitely a issue because it kills the motors more with the walk followed you're tips just wanted to give you my own as well
@peterhoulis1184
5 жыл бұрын
Ive got 2 black /grey ones , ive opened 1 and it has bad leg wiring , the other works but i haven't checked it as yet
@sylvie2350
6 жыл бұрын
Question, are the "kneecap" plastic things on their knees required for operation? If so is there anywhere I could get replacements? If not is there a way to 3D print it?
@electrictnt4482
4 жыл бұрын
No you don't need the black knee caps
@alfredogonzalezcuevas1641
Жыл бұрын
🤔
@ltjake8535
3 жыл бұрын
Is a rewired robosapien v2 worth it for £130
@ScarfFlan1
7 жыл бұрын
yeah you it going and run away from it unless it is pervockitiv.
@hellothereknownasunknownus6535
4 жыл бұрын
Do the uk Coloured ones have badwires because I have a red v2 that still works on his original wires?
@RoboticalHalloween
4 жыл бұрын
the uk models do have bad wires too. We didn't know that until recently, you might just be lucky and the wires still haven't fully broken down yet. They will probably break down if you keep using it though. So get it rewired before it gets worse and you want to use it.
@hellothereknownasunknownus6535
4 жыл бұрын
robotdotjpg ok thank you for telling me I might open him up and have a look
@Angrylad.
3 жыл бұрын
@@RoboticalHalloween wrong if you get a uk 1st gen v2 then yes it has bad wires but if you get a 2nd gen which I have, it doesn’t have bad wires
@thatgazelle2001
8 жыл бұрын
this may seem out of place but do you have a Gmail account I love wowwee robots as much as you.
@hellothereknownasunknownus6535
3 жыл бұрын
Are the uk ones like this I opened my red one and the wires haven’t crumbled
@jobeanvideos
3 жыл бұрын
Some of the UK ones actually have good wires
@hellothereknownasunknownus6535
3 жыл бұрын
@@jobeanvideos oh ok I must of got lucky then because all of the wires are fine only thing on the v2 that is not working is the sound
@TheAllPowerfulMugKing
Жыл бұрын
@@hellothereknownasunknownus6535 that means the speaker is worn out or broke. you need to buy or get a new speaker for the v2
@thenoid5131
7 жыл бұрын
I found one I'm gonna try see if ppl in 3D printing community wanna start printing parts for these
@electrictnt4482
4 жыл бұрын
Good idea
@animatronicman5238
2 жыл бұрын
That would help a lot
@robotanimatroniccollector6333
3 жыл бұрын
Do pearl white ones have legs that snap off?
@jobeanvideos
3 жыл бұрын
Yes because they are the same model as the black ones
@megacat721
3 жыл бұрын
bro I fix all my v2s that’s nothing compared to the shit I’ve been through
@jobeanvideos
3 жыл бұрын
Okay
@Zorua635
2 жыл бұрын
I've been fixing v2s for years and trust me I've seen much much worse.
@AlexCrews
Жыл бұрын
@@Zorua635 Wow
@soundgardenenjoyer
Жыл бұрын
my rs medias head had broke itself some how and it had feel off so yea...
@Nixias_
Жыл бұрын
@@Zorua635gigachad
@animatroniccollector3928
8 жыл бұрын
My White V2 shells are like your whites. It's very sensitive.
@nickcostello1732
7 жыл бұрын
You might think I'm crazy but I have a white one no yellowing and no bad wires Halp me it does not turn on also it has no q.c. Passed stickers on it anywhere
@RoboticalHalloween
4 жыл бұрын
There was a pearl white model that came out the same time as the black ones, you probably have that one. Are the battery contacts corroded? Try cleaning them, sometimes that will get it to work.
@nickcostello1732
4 жыл бұрын
robotdotjpg Oh man, I parted the thing. I ended up buying a blue one and taking the wire harness out of the white one to put it in there. Only issue is Both of the gears that connect the legs to the body are broken.
@RoboticalHalloween
4 жыл бұрын
@@nickcostello1732If you still have the outer shells put them on your blue one, the pearl white model is pretty difficult to find so its worth using the shells from it.
@nickcostello1732
4 жыл бұрын
robotdotjpg alright, I also got another question. Would it be possible for you to email me the content of an rs media sd card? I accidentally formatted mine and cant figure out how to fix it
@RoboticalHalloween
4 жыл бұрын
@@nickcostello1732did you format an SD card or the media itself?
Пікірлер: 50