That was amazing to see you climbing the Peterson Creek trail with such speed. There is some serious power in that set up.
@HighVoltageKits
3 жыл бұрын
Its a bit quicker now I am on 72 volts.
@wavebicycles
5 жыл бұрын
Thanks for posting this excellent video, i am glad your enjoying the controller!
@wavebicycles
5 жыл бұрын
Also would like to credit electron cycles as they have played a major role in developing this controller kit. www.electroncycles.co.uk
@HighVoltageKits
5 жыл бұрын
Its awesome. I smile everytime I rip the throttle. I may have sold a few for you lol.
@FrancisW
5 жыл бұрын
@@HighVoltageKits This vid is def making me consider getting one. lol. I have the jumbo: "Samsung 35E: ~25A Continuous, 34A Max Burst Current" so I'm dstill trying to figure out if it would be worth it without having to change the battery to one of the others
@HighVoltageKits
5 жыл бұрын
Francis W I would suspect the trip is set quite low on the bms if that is the max draw rating. Which would mean that it would cut power to the controller to protect the battery. I've had mine do that once as with the 30q it's set to trip at over 60 amps for more than one second.
@gerardlewis3098
4 жыл бұрын
I would you be able to setup this controller for the Rad power bikes line of bikes? thousands of us would be ready to purchase.
@yourstruly9340
4 жыл бұрын
Finally!! Yeah. I was able to make my order. Thx ERT! Cant wait to get it 😜 Oh and with the new touch screen.
@dasppg9737
4 жыл бұрын
Good luck. I’ve been waiting 2 months and no response from ert.
@yourstruly9340
4 жыл бұрын
@@dasppg9737 i hear you. I had to finally cancel it last week, two months waiting for it. I just ordered the phaserunner fron Grin. Besides it looks more professional put together, nicer and smaller.
@dasppg9737
4 жыл бұрын
Albert Nieves is the phase runner available? I tried buying it a while back and it seemed unavailable at the time
@HighVoltageKits
4 жыл бұрын
The phase runner got a new version actually. There are a few videos on it on their KZitem channel. Let me know how you get on!
@yourstruly9340
4 жыл бұрын
@@dasppg9737 yes they are available. I just got an email that my order was shipped and I confirmed it by tracking it. And best of all it only took 1 yes one week to be shipped out from the date of ordering it. Thats fast service. I ordered it on 6/2 and today 6/9 it was shipped to me.
@VRMinde
4 жыл бұрын
Thank you for this great video! It sounds like this controller might be just what I need... :)
@HighVoltageKits
4 жыл бұрын
They make the bbshd a totally different beast. Very smooth and fast.
@milohugo2269
3 жыл бұрын
Sorry to be offtopic but does someone know a trick to get back into an Instagram account..? I was dumb lost the account password. I would love any tips you can offer me!
@alonsocanaan8764
3 жыл бұрын
@Milo Hugo instablaster ;)
@HighVoltageKits
3 жыл бұрын
Instablaster sounds like a vibrator... just saying
@milohugo2269
3 жыл бұрын
@Alonso Canaan thanks so much for your reply. I found the site through google and I'm in the hacking process now. Seems to take quite some time so I will get back to you later with my results.
@vonwagner1257
5 жыл бұрын
Great video again. Very detailed and super helpful.
@HighVoltageKits
5 жыл бұрын
Thanks alot! Glad you found it useful.
@alanbrown7155
5 жыл бұрын
You'll have to put up a video showing how you installed the new controller. Thanks interesting video.
@HighVoltageKits
5 жыл бұрын
You are welcome. I had to get it on fairly quick as it's my main transport. I have to fix it on better though so I'll do some more install stuff when I do that. Check out Electric Race Technologies channel as there is an install video on there. Cheers.
@pibo8874
5 жыл бұрын
Yeah would Love to see the installation
@HighVoltageKits
5 жыл бұрын
Pi Bo I did a reinstall video recently. kzitem.info/news/bejne/1459toKGpqGZi6w there is also some good stuff on the electric race Technologies channel.
@rdkuless
3 жыл бұрын
it would be nice if GRIN TECH would design a controller that would fit inside the casing or replace the controller completely without having a separate thing to strap to the frame.. You also have to get different brakes, display, and multiple sensors... GETS EXPENSIVE.
@HighVoltageKits
3 жыл бұрын
Grin make good stuff but the tech is based on ASI property. It has to work with many motors from the bbshd to hubs and beyond. Luna have just developed a version 2 of their bbshd controller on the vesc platform. It seems locked to the purchase of a bike however
@rickdavid1795
3 жыл бұрын
Awesome video
@HighVoltageKits
3 жыл бұрын
Cheers Rick!
@athanasiosbartsotas9534
5 ай бұрын
Hi, are you shipping this controller to norway? and if yes do you have any video with instructions with details how to connect it etc?
@HighVoltageKits
5 ай бұрын
We ship to Norway. Send an email to greg@highvoltagkits.com if you list the videos on the KZitem channel there are quite a few on the installation. You can also join our discord community where all our online support is. Cheers
@user-el4ph8jn2j
3 ай бұрын
Pls can u post a video on how the motor controller are being designed
@HighVoltageKits
Ай бұрын
I am not the best for this sort of stuff. Check out EV Components Review
@amightysailingman
4 жыл бұрын
Are the stock Bafang attachments (throttle, e-brake, shift sensor) plug and play with the ASI controller?
@HighVoltageKits
4 жыл бұрын
Yeah. The kit uses the same bafang harness. So you would just plug the main harness into the plug on the loom that comes with the kit. All the other bits plug in like normal. You may need an extension for the gear sensor depending on where you locate it.
@potster586
4 жыл бұрын
Hi Captain, I'm having problems with my ASI bac controller. It's already been back to the supplier once to check it's config and it has come back with exactly the same issues. Before I contact the supplier again I thought I'd ask you, as your setup is so similar to mine. I have chosen this video to comment on as it shows exactly what I would've expected from this controller. However my ASI BAC controller pedal assist starts at 50 watts on lvl 1 and goes all the way up to 250 watts at lvl9 ....yes that's 250watts. Also the 750c display doesn't have a 52v option! It has 36v 48v 60v and 72v therefore the graphical representation is inaccurate, at least it displays voltage numerically and that's accurate. The throttle function seems fine. You can imagine my frustration at installing, removing and installing again. So I thought I'd ask you if you think I might have overlooked something before I contact the seller again .
@HighVoltageKits
4 жыл бұрын
Sounds to me like it's been locked to road legal EU specs. I'm not familiar with the 750c Is the reason it's not giving you the 52 volt option is that it is already selected? Sorry you having trouble. I imagine 250 watts is a bit dull.
@potster586
4 жыл бұрын
@@HighVoltageKits Cheers for your reply Captain. It does sound like it's EU spec lol but this was never an option. Having communicated the conservative pedal assist values and no 52v option on the display I was requested to send it back, which I did. Sadly nothing has changed. Yes you're right conservative pedal assists are dull, pants, shitty cockwomble. Other than that it's epic 😂. Time to get back in touch with the vendor. It's replacement time or refund. So disappointed. Thanks for your time Captain. 👍
@shaung7441
4 жыл бұрын
Thanks for the video! How is your bike fairing after over 6 months with this controller? Does the motor still operate nicely? Has the drivetrain noticeably deteriorated yet?
@HighVoltageKits
4 жыл бұрын
You are welcome. Its holding up well. At 72 volts now and it actually runs cooler than 52 volts as the amp draw is less. This is my most recent overview. kzitem.info/news/bejne/xG2nm4iYgouian4
@shaung7441
4 жыл бұрын
Captain Codswallop cheers, I’m very tempted to get this setup. Only thing putting me off is the noise when compared with a dd...
@HighVoltageKits
4 жыл бұрын
It's not as loud in person or to a passing person. The camera is quite low on the frame. It's not silent but people quite often dont notice the sound until quite late. Knobby studded tires dont help. Offroad it's much much quieter. If you want almost silence then it's not going to work. But even full power it's way quieter than a car or motorcycle. Even a regular fatbike with knobby tires will make a fair amount of noise on the road. I'll shoot some better noise footage this year from different perspectives later this year as it's a question I get asked alot. I hope this rather rambling reply is of some use. Cheers
@johnstutt5927
3 жыл бұрын
Would you recommend this set up if you are using the specialized fat boy for riding in the snow or sand? And do you set up bikes yourself for others?
@HighVoltageKits
3 жыл бұрын
If you are local in town once the bloody covid restrictions are lifted then we can have a chat. I can certainly give you advice. In the meantime you are very welcome to join the channel discord community and post questions etc. This is the link. discord.gg/AnyQRuh I have ridden up to the top of Kenna Cartwright in snow so it does seem to go well. I used to ride it alot in snow in Gatineau. I use studded tires in winter. Sand you can ride on with good grips and wide tires! Cheers
@ngoNORA
3 жыл бұрын
Great content! Isn't that the max amps the controller can pull out of the batt pack and put into the motor related to the amps the cells in your pack and the BMS can put out. So my em3ev triangle pack has a rating of 31A continuous, with the Panasonic GA cells, and max burst of 41A, and the BMS is set to trip at like 50A. So in theory the best I can get from the pack is 31A X 52V = somewhere north of 1.5kw or maybe 41A X 52V = ~2kw+. In other words, how can the ASI controller deliver more power to the motor than what the cells are rated for, i.e. pull out more amps than what the BMS in that battery pack would allow? I'm really looking into getting your BBSHD BAC855 Upgrade Kit but I don't know if it would work with my setup (bbshd + triangle 14s6p GA sells).
@HighVoltageKits
3 жыл бұрын
The cells you have are more designed for a good capacity than high power delivery. The ASI will try and take as much power as you set it to within its limits..So if you set it to pull more than the battery bms can handle it will trip to protect it. With the specs you have you would need to reduce the power to the point where you do not trip the bms. Hope this makes sense. Cheers
@akinnon2000
2 жыл бұрын
Great job with those videos. Thanks for the content. Is there any way to buy a used ACI 8XX already programmed for a Bafand BBSHD ? Is it a thing?
@HighVoltageKits
2 жыл бұрын
Ebay is your best bet. Or classifieds. We make a kit ourselves but there is quite a wait list right now.
@akinnon2000
2 жыл бұрын
@@HighVoltageKits Thanks for your answers. Do you think the Grintech's phaserunner or Baserunner can be another option ?
@HighVoltageKits
2 жыл бұрын
If they make it again yes. They also do the Frankenrunner which I'd another option
@mikezof3690
2 жыл бұрын
hello, very informative video. i have a bbshd and i was thinking to upgrade to the bac controller but the prices i see are very high. how much did you buy the bac? thanks
@HighVoltageKits
2 жыл бұрын
The evaluation kits are expensive. We do make kits where they are cheaper as ASI dealers. The best way to get one is to have it pre programed. You can get a similar kit also from Electron Cycles in the UK.
@MeowBoxie
5 жыл бұрын
Awesome you decided to get this controller, I saw you in the comment section on another video and I just placed my order for the Bac800 yesterday from ERT so I hope you're up for answering some questions... How fast was shipping to Canada? I'm also in Canada and wondering when I should expect it. I saw you were trying to make your bike street legal with the stock controller but can you still do this with the Bac800, Either through the BacDoor app if you can get login details or through the Eggrider? I ordered the 72v version even though I currently only have a 52v battery I plan on upgrading to 72v just to keep the heat down on the motor but in the mean time I hope I can still use the 72v version with my current battery, Are you running 52 volts now aswell? Sorry for so many questions but there really isn't much info on the Bac800 especially paired with a BBSHD or Eggrider and there's conflicting info on the BacDoor app too, I really like to tinker with things and I'd love to be able to adjust settings how I like them on the controller.
@HighVoltageKits
5 жыл бұрын
Yeah fo sure. It will be later tonight as I got to finish up at work. Cheers
@HighVoltageKits
5 жыл бұрын
It was pretty quick shipping. Maybe five days. I have no idea with regards to the 72 volts. I went with the 52 volt plug and play version. I read some stuff about the mapping (whatever that is) needs changing to run the different voltages. The wiring for the eggrider might be different as well. This info came from the uk site electron cycles. The bacdoor access is not quite as simple as ERT does not issue logins ASI do directly. They dont seem super keen to give them out if you dont buy from them direct. Alan is a good guy and will help you with the 72 volt issue. If you have a bafang programming cable you can use a desktop version of the bacdoor app. I did get a logon by calling ASI. I may just have been lucky tho. Alan was pretty surprised I did get one. What you get with ERT is very good parameters already configured. I have changed nothing and it's great. I believe that they are working to make the eggrider app work to program the bac but it's a future update. Alan will pick up the phone and answer texts so it may be a good idea to contact him with your situation. It might be that your bac needs configuration to work at 52 volt and then changing again when you hit 72 volts. No worries about the questions. Happy to help.
@MeowBoxie
5 жыл бұрын
@@HighVoltageKits Alright thank you so much for the help, Hope you keep making videos about it.
@HighVoltageKits
5 жыл бұрын
Will do. I have to reinstall to waterproof so will show some more then.
@HighVoltageKits
4 жыл бұрын
The crank set is integral to the motor and designed for it. Once you use a thicker chain it's not a problem either. The thinner chains like 10 and 11 speed don't last so long. Still got good lifespan. Sprockets are fine still even at higher power. The way the controller delivers the power is much less damaging to the drive train than you think.
@dasppg9737
4 жыл бұрын
It’s now been 2 months since I ordered my bac800 from ert. To date I have not received a single call back or email response. While I’m sure the products are great this is the worst service I have ever experienced and that’s saying a lot as I order a lot of items online. I also ordered a bac8000 and curious if I’ll ever receive that too
@HighVoltageKits
4 жыл бұрын
I understand your frustration. I have setup a channel on discord for nxt updates. Alan is posting information on no there regarding shipping etc. This is the link. It is not intended to fix customer service but the discord was something I was doing anyway and I thought this might help people. discord.gg/ajdgfqU
@cia4915
4 жыл бұрын
I am getting use to the speed of my bafang 52volt 1000watts its more like 1400 watts it goes good but faster would be nice. Your motor sound really loud. Metal gear instead of nylon gear mabe. Mabe i will get this or buy a cyclone 3000 watt. 🤔👍🏻
@HighVoltageKits
4 жыл бұрын
It needs greasing. I will get round to it. The peak for a BBSHD at 52 volts should be 1700 watts. So if it is not getting to there then I suspect that the AMPS have been capped on your bike. Do you have a programming cable?
@yourstruly9340
4 жыл бұрын
Also I am currently with a 52 V battery but in the near future I am going to 72 but would it be the same controller
@HighVoltageKits
4 жыл бұрын
Yeah the bac800 does 72 volts.
@minimalistica01
4 жыл бұрын
Hi I have bafang 1000w mac motor and when I slow down or stop for a second, the motor turns off. I need to turn the throttle twice or pedal in reverse to turn it on. How can I change that? It’s annoying and frustrating… do you have an idea?
@HighVoltageKits
4 жыл бұрын
Not at present but if you join my discord forum discord.gg/YAAjfgc you can post pics etc and we can take a look. Some very clever people on there. Cheers
@SternLX
5 жыл бұрын
Hmm, sounds like this would feed my need for more speed, might have to look into one of these controllers for my commuter bike. Not a lot of hills to traverse here in Las Vegas. I think the biggest grade is maybe 2% uphill going to work. It's all flat and down hill to home. Speed limits are 35mph tops on my route. Being locked into the 750w max on my BBSHD with 52v battery gets me to maybe 27mph on the flat with throttle only. I can PAS up to about 30mph in the highest gear on flat ground. BTW my Bafang is mounted up to a Schwinn Central 700c. I mounted up Goodyear Transit Speed tires since the stock rubber wore out stupid fast after a year of commuting on it.
@HighVoltageKits
5 жыл бұрын
Sounds like a sweet ride. You'd easily hit the limits with the asi even on the lower power settings.
@thomasjurd172
3 жыл бұрын
I have the 750w and i get 30 mph now i changed the back cassette to 13.28 . Before i was getting 25 mph with the 14.34 so the 1 less cogg gives 5 mph . Looking for a 11.28 an that will get me pedallin up to 35mph . Took some time to sort the gearing out as 1st i was pissed off
@luckyshadowtux
3 жыл бұрын
If you only use one gear, why not just a hub motor?
@HighVoltageKits
3 жыл бұрын
I have nothing against hub motors. But the climbing ability and overall balance of a mid drive are superior IMO.
@t0psh0tta
3 жыл бұрын
Is your controller sending more than 30 amps to the motor? If so, what type of battery cell is required for this?
@HighVoltageKits
3 жыл бұрын
Its 50amps ish. Bit more peak. I use Sony vt6 cells on my 72 volt pack. I have a 72 volt lipo pack as well. You need a battery pack that can deliver at least 60 amps continuous. That requires the right bms and a number of cells can do it.
@ANBHK
4 жыл бұрын
Hi Sir. I would like to ask a weird question to you. Is it possible for you to mention the temperature at which the internal nylon gear can melt? Then i would be able to push the motor to limits without harming it cuz if the temperature rises then automatically power would be cut off from the motor. Please Captain.
@HighVoltageKits
4 жыл бұрын
Nylon melts at over 200C. But failure will be well below that. Not sure the exact point. Best advice is to gear the bike to not let it get that hot. Check this video I did. It goes into detail about the nylon gear. kzitem.info/news/bejne/xG2nm4iYgouian4
@gerardr4869
4 жыл бұрын
What is the max voltage you can put to the original BBSHD controller?... Have you checked the voltage rating of the capacitors inside?
@HighVoltageKits
4 жыл бұрын
No I have not but I am pretty sure 52 volts or 58.8 fully charged is the max... With a bit of wiggle for spikes.
@gerardr4869
4 жыл бұрын
Captain Codswallop Do you think it will be okay to use my 3 20v(18v nominal) 9Ah dewalt batteries in series (61v fully charged). I suspect the voltage will sag a little under load. The capacitors of other Chinesse controllers are usually rated for 63v but I am not sure if that is the limit for max voltage. What do you think? Ps. Greetings from Calgary, you have a collection of great videos.
@HighVoltageKits
4 жыл бұрын
Well honestly. No idea. But if you want to join my discord. There are some good battery people on there that could tell you. In theory yes. You could also undercharge them. Depending on the firmware on the bbshd you may need to flash it. Cool idea tho. Whether they will handle the current requirements is another question. discord.gg/YAAjfgc
@chrisvanhoof3431
4 жыл бұрын
I heard that the E.R.T bac800 is locked? can you still adjust parameters in the bac800 with the Eggrider? like in the original Bbshd controller? Regards Chris.
@HighVoltageKits
4 жыл бұрын
I'll do an update on the eggrider. It seems to behave very nicely with the ASI. You can change most profile things you'd want to. No idea on the locking part. Mine clearly wasnt but maybe they are now. They work hard on the parameters so they would rather they stay hidden I guess. I haven't changed anything and it's been good for me so far. Cheers!
@chrisvanhoof3431
4 жыл бұрын
@@HighVoltageKits Thanks,
@yj8471
3 жыл бұрын
The BAC 800 is no more now? Is it not the 855 now ? What's the difference?
@HighVoltageKits
3 жыл бұрын
Better heat sinking... Firmware like the 2000. Put it this way... There is nothing that would drive me to swap out my 800
@yj8471
3 жыл бұрын
@@HighVoltageKits Spoke to Max and he told me that he only supplies the 855 now and recommended the TFT touchscreen in preference to the Eggrider, I think I will wait until the new year to see what happens after the Brexit transition period is over, as it looks like Boris has agreed a FTD with Trudeau lol 😁 not sure how credible that is or if there is in truth to that fact ..
@HighVoltageKits
3 жыл бұрын
Sounds like a plan! Who knows what will happen these days.
@yj8471
3 жыл бұрын
@@HighVoltageKits Exactly with two dicks like Johnson and Trudeau calling the shots take nothing as gospel unless it actually happens.
@thomasjurd172
3 жыл бұрын
I got the bbso2b 750w and after changing my rear cassette from 14.28 to a 12 28 its going 67kph 42mph but thats no weight . If lm sat rideing now i can get 35mph but i stay around 26 to 29 mph and happy an it wont burn the moter out . If i put the 52t chainring on it would do easy 40 with my weight but will keep with the 48t as it will burn the moter . Well happy with mine . By the way these speeds are level 5 . I should check out level 6 to 9 but its good at level 5 set . I love speed but i wont put the moter watts maxxed out . Faster then some bbshd moters .
@HighVoltageKits
3 жыл бұрын
Sounds like you have got the gearing figured out! Its a balancing act for sure. I could push mine more for speed but it would be at the cost of reliability and longevity of the drive train. Cheers!
@thomasjurd172
3 жыл бұрын
@@HighVoltageKits yeah it was 17 mph an felt let down . The vender was no help at all . But after lotsa foruom reading sorted the back and front out an slowly it was up to nearly 4omph but put my weight on at 30mph i still cant quite keep up pedalin which is good . If i put the 52t on i would be able to pedal but thats not wat the motor wantsc. So i plod at 28mpj an not put motor under strees . So 30mph is on straight but keeping under 30 its a sweet spot . Took time to sort. Fuk the 52t will keep itv away so it will last . Just ordered bbso3 or as called bbsHD from cnebikes for the kit $470 which would have cost 600 pounds plus
@thomasjurd172
3 жыл бұрын
@@HighVoltageKitscvf read you csn up the volt
@HighVoltageKits
3 жыл бұрын
52 volts is the max with the stock controller i think. Maybe join the discord and post this on there. Easier to get you help. The link is via my website www.captaincodswallop.net
@thomasjurd172
3 жыл бұрын
@@HighVoltageKits i will stick with a 48v with the highest amph like a 20amph . I got 40 miles mainly on throttle as crank arm come lose . But was surprised how much i got thr 1st run , so 60 miled easy staying in pas 1 to 4 . . And 26 mph is plenty.
@miguelt.7997
4 жыл бұрын
I mostly use for pedal assist with occasional Throttle application, does the controller improve efficiency in terms of range? Very curious, I just don't like how bulky it is and how it makes the bike look DIY.
@HighVoltageKits
4 жыл бұрын
Changing a controller in itself will not increase your range. Which is simply a case of how big your battery is and how fast you choose to drain it. I use the controller because it is light years ahead of the stock stuff in the control it gives you over your motor. If you are not comfortable with making mounting hardware and custom parts then external controllers can be less attractive. It depends what you want. The auto engagement you can have with this controller is great for PAS control wise. No more snap on and off with the power as you stop and start peddling
@miguelt.7997
4 жыл бұрын
@@HighVoltageKits Nice! being thinking about the upgrade, perfect project to kill time in the pandemic, however, I don't think they have any stock on those controllers anymore. Is phase runner comparable?
@HighVoltageKits
4 жыл бұрын
Kind of. The really cool PAS stuff is on the nxt tho. It will be back in stock.accelerated-systems-inc.myshopify.com/products/bac-800-eval-kit-with-bluetooth This will not be 600 via Alan. It is the replacement for the 800.
@chrisrathjan1501
4 жыл бұрын
I don't want to start the age old argument. But to be honest I was expecting more performance from the amount of wattage compared to a hub motor. Maybe it's just the video not capturing the sense of speed.
@HighVoltageKits
4 жыл бұрын
It's quite a heavy bike and the 52 volt pack it's running on is not the highest power. It's much zippier on 72 volts. Runs cooler as well. kzitem.info/news/bejne/0G6wk5ydf3eQjIY
@Mickey.Doyle80
5 жыл бұрын
My bbshd does 50+km/h on flat with a standard controller set to 28amps with 52v battery
@HighVoltageKits
5 жыл бұрын
That's great! You must have done a good job on the install! If you check some of my earlier stuff the fatbike did 50kph on the 27 amps em3ev had it on when I bought it. It just took a long time to hit the speed and it would not maintain it up hills. The ASI controller blows the stock performance away. It will do 60 on the flat on a full charge and gets to 50kph very fast. Even up a 9 to 10% gradient it will hold 45 kph. What bike are you riding? Cheers!
@jasoncroasdell8212
4 жыл бұрын
I'm in need of an external motor controller for my bafang BBS02 750 watt motor. I keep braking the bafang controller by burning out the transistors. What would you suggest I do? Many thanks from south uk
@HighVoltageKits
4 жыл бұрын
This kit will do it from ERT. The eggrider option has issues right now though. I'm not sure if the nxt touch screen is ready to ship for the bbs02. The other option is the phase runner. In the uk the dealer for this kind of stuff is electron cycles. I think they do this kit as well. Francis is the owner so you can shoot him an email. www.electroncycles.co.uk/ hope this helps. Cheers
@jasoncroasdell8212
4 жыл бұрын
i have the "LUNA MIGHTY MINI DISPLAY FOR BBSHD AND BBS02" many thanks jason
@HighVoltageKits
4 жыл бұрын
It's nice display. Keep tabs on the nxt. There are some very nice features coming over the next year.
@MustyBastard
5 жыл бұрын
Will I be able to use peddle assist modes with my C8 color display ? I am only doing the upgrade so I can install a 72V 35AH triangle battery and get the extra range. Don't really care about the higher top speed. With a 72v battery in peddle assist mode two it should be like a 52v battery in peddle assist mode 4. I don't know if my philosophy is right. Just trying to get a 100km plus range without peddling. I currently get 70kms out of my 1450 WH 52v battery.
@HighVoltageKits
5 жыл бұрын
The slickest option is to use the eggrider v2. It will run the pas levels how you want. There is an option at ERT in the drop menu to pick 72 volt eggrider. They also do a colour display that works with pas. All other bafang displays will only give you full power on throttle and 1 level if pas full power which is not what you want.
@MustyBastard
5 жыл бұрын
@@HighVoltageKits Ya that was what I read. I want peddle assist, because it helps to moderate power consumption. I guess ill be buying another display as well lol. Thanks for the input.
@HighVoltageKits
5 жыл бұрын
Anytime. Make sure you are clear with ERT which voltage you are running and which display as it makes a difference how they configure the ASI
@conservative1342
4 жыл бұрын
I thought the BBSH could only run 1500w at the max? Am I wrong? I am buying one very soon! My bike is already shipping.
@HighVoltageKits
4 жыл бұрын
The sticker on the side says 1000watts and 48 volts. The stock controller will run a max 30 amps which translates to approx 1700 watts peak power. Using an external controller enables more amps to be sent to the motor. The stock controller would burn up over 30 amps. The BAC800 has much better electronics so more power. There are certain rules to follow though. Try this for more info on how I did my bike setup for higher power. kzitem.info/news/bejne/0HiqzYRrfIOSY4Y
@joycemanini3346
3 жыл бұрын
@@HighVoltageKits Thanks captain I got on your list for the kit .would you know about how much it would cost for shipping to new Jersey in the United states? Thank you
@HighVoltageKits
3 жыл бұрын
You are best off joining the discord channel for kit news and questions. I would guess $30 for shipping. That's not a guarantee lol. discord.gg/ScWuVxu9 let me know if you have any problems with discord
@dasppg9737
4 жыл бұрын
It’s now been 3 full weeks since I ordered the bac800 +touchscreen from ERT. Still not shipped and no communication from Allen.
@HighVoltageKits
4 жыл бұрын
I addressed things a bit in my most recent video. Alan is working as hard as he can to produce and ship things. I'm sure you will get your order. I am not customer service or tech support though so cannot update you sorry
@GrendelKhan666
3 жыл бұрын
There is a supplier for ASI BAC controller now. I think that ERT is dead. www.acceleratedsystems.com/
@YouTubeTheOne
4 жыл бұрын
Nice video! How you have connect the gear sensor?
@HighVoltageKits
4 жыл бұрын
There was a plug for it off the main harness. A yellow higo
@YouTubeTheOne
4 жыл бұрын
@@HighVoltageKits thx,on the asi bac? When yes, do you know the phaserunner have the same option? I wanna buy now a bafang and I don't know what is the best option for me! The 750w have not enough power for, when isn't modified! But 1000watt bafang is really expensive and also the controller is not the best!
@HighVoltageKits
4 жыл бұрын
The phase runner will see you stuck with the cycle analyst for a display. You can use the asi with the bbs02 just less power. That's up to you. The phaserunner is a custom version of the bac800. Not as good heat sinking etc. Smaller package and easier to mount slightly.
@s.u.9679
4 жыл бұрын
Hi Captain . I have one question. Can the ASI 800 run on 48v 50a battery ?
@HighVoltageKits
4 жыл бұрын
Pretty sure. Its listed as 36 to 72 volts in the manual.
@ayoutubewatcher7009
2 жыл бұрын
How much more torque?
@HighVoltageKits
2 жыл бұрын
Its about double the power and torque I would estimate. No actual figures tho as no access to a rolling road etc.
@brian16021955
5 жыл бұрын
Hi what app are you using with onscreen graphics
@HighVoltageKits
5 жыл бұрын
It's a combination of Garmin virb edit and Racerender. The first is free and the second has a decent free trial.
@trekbiker6069
5 жыл бұрын
Incredible video Captain Codswallop. Thanks for sharing your research on new controller. You said the controller sends 50amps to motor, but I believe your battery from em3ev is only 40amps continous right? So are you really getting that 50amps to motor?
@HighVoltageKits
5 жыл бұрын
Thanks! You make a good point on the battery. I emailed them before I bought the controller and Joseph said 50amps was the max and the cutoff for protection via the bms is 1 second of just over 60 amps. Looking at the readouts it seems to be pulling 50 amps. But the bms may well drop it down a bit on longer stretches with it wide open. If I do another battery I will get the higher energy Panasonic cells as opposed to the samsung 30q's
@trekbiker6069
5 жыл бұрын
Well if it says pulling 50 amps then it must be. You are getting incredible acceleration and it looks so smooth. It will be interesting to see how the HD holds up over the next 6 months with 2500watts going thru it. Please keep us updated. Keep up the good work!!!
@MeowBoxie
5 жыл бұрын
@@HighVoltageKits I have been window shopping for a 72v battery for about a month now and I'm pretty sure I'm going to go with the LiteSpeedBikes 72v 20.4 ah but with another parallel group making it 27.2 ah which is 1958 watt hours, I really wanted an em3ev battery since I currently use a 52v from them but they don't currently make a triangle 72v battery and are too busy right now to make a custom pack. So for a 72v 27.2 ah 50amp bluetooth bms battery with a 6.5 amp charger and a bag it's going to be $1,900 CAD which seems insane after thinking how much I've already put into this hobby especially since i started off with a BBS02 on an old bike I rode to work then got hooked on the power and decided on getting a Giant Talon 1, BBSHD, Eggrider, ERT BAC800 and now a much bigger battery I'm just wondering how much more am I going to spend on this hobby/addiction lol. Actually I have been thinking about upgrading my throttle from the cheap LunaCycle full twist to a Magura or Domino full twist but that's for another day...
@HighVoltageKits
5 жыл бұрын
meow boxie That's the danger lol. It's cheaper than gas / petrol right?? lol. I emailed em3ev regarding 72 volt stuff and they said the size of the bms caused the pack to be shaped like that. They are looking for a smaller bms that will make a triangle pack and said they will likely offer it in the future but not time scale. I wanted a custom pack but alas it's not an option for them due to work volume. l will look at the litespeed one, thanks for the info. Luna do some as well but I'm just not keen on them. My one order experience was a bit poor. I'm not convinced of their battery quality. But they have been around long enough to know what they are doing I guess. Some people use lipo but I know nothing about those. Other than you can blow them up charging them apparently.
@trekbiker6069
5 жыл бұрын
@@MeowBoxie Hey do you ride the Gaint Talon in winter? How does it perform in snow with the HD?
@ILANHALFON92
4 жыл бұрын
Dear man, I have an Asi bac 855 connected to the Inokim ox scooter (I know the motor is 800 watts). Do you have a configuration file for the bacdoor application, please?
@HighVoltageKits
4 жыл бұрын
Not that would run your scooter. discord.gg/YAAjfgc Join this and post and you might get some help as to what to do. There are a few people doing scooters on there
@kerndog1472
4 жыл бұрын
How were the various PAS and throttle wattages set for the EggRider?
@HighVoltageKits
4 жыл бұрын
Try this video kzitem.info/news/bejne/uGeIuWWkhWN8hm0
@kerndog1472
4 жыл бұрын
@@HighVoltageKits I watched the video bit still dont understand how you programmed eash assist level to have different wattages for PAS and throttle. It seems there would be 10 different wattages you would program, in a table-- 2 for each level.
@HighVoltageKits
4 жыл бұрын
sorry I missed this. The ASI has scaling parameters in its flash memory that scale the levels based on a percentage of the max level you choose on the eggrider. So if you set 1000 watts on PAS and 9 levels of assist on the eggrider you can go up 100 watts or so with each level. So there is quite a bit of flexibility for power options.
@kerndog1472
4 жыл бұрын
@@HighVoltageKits Thank you. Thats what I was trying to understand.
@martinsinclair55
4 жыл бұрын
How are you overlaying those three images on the video?
@HighVoltageKits
4 жыл бұрын
I'm using a garmin virb camera with gps built in although you can also use data from strava. The free garmin editing app allows you to create the overlays. Cheers
@yourstruly9340
4 жыл бұрын
I am about to purchase mine and would like to know does the kit comes with the display or do I need to buy the displays separate
@HighVoltageKits
4 жыл бұрын
I would get the nxt display to get the best out of the ert kit. It should give you options. Which motor are you using it with?
@yourstruly9340
4 жыл бұрын
Bbshd
@yourstruly9340
4 жыл бұрын
So is the display included in the Price of the kit or do i need to get it separate?
@HighVoltageKits
4 жыл бұрын
You can order it as part of the kit. I think you have to register first and then you can see the options.
@yourstruly9340
4 жыл бұрын
Thx.
@fredericosilvachourik1308
Жыл бұрын
How did you get account to bacdoor?
@HighVoltageKits
Жыл бұрын
When this video was made I used my wit, charm and English accent... in short I blagged it. These days you need to be on their dealer program or have an evaluation kit.
@riccardomichelin2009
3 жыл бұрын
i need asi 855 kit for bbshd, can you help me?
@HighVoltageKits
3 жыл бұрын
We sell upgrade kits. Operating a wait list right now. It's about one to two weeks. Information here. highvoltagekits.com/webstore/p/bbshd-bac855-upgrade-kit-by-mr-hv
@gursisingh1940
4 жыл бұрын
What top speed you think you would get on smaller chainrings at the back?
@HighVoltageKits
4 жыл бұрын
It's not an easy question to answer. The short one is probably over 80kph on the flat. It runs risk to the motor though. The top speed with the gearing I have is 70kph at 72 volts. But that's on a fat bike with 4.6 inch tires and weight. A lighter bike with less drag will go quicker.
@gursisingh1940
4 жыл бұрын
@@HighVoltageKits I have a 2000 watt hub and goes at 38-40 mph top on flat ( nearly 70 kmh) but I want to make a mid drive, what kit would you suggest?
@HighVoltageKits
4 жыл бұрын
The two main conversions kits for that kind of power are the established bbshd and the newer cyc x1. CYC have just updated their website with the newer torque sensing options so that's worth a shot. With the bbshd you can buy a kit online but to get the speeds and power I am running you will need the bac800 from ERT.
@dennisfigueroa9067
4 жыл бұрын
Does switching over to this controller mean that I will get less miles from my battery before having to charge it?
@HighVoltageKits
4 жыл бұрын
It will give you that potential yes. Whether you run it max power is up to you. I can still get 30+kms out of mixed riding on a 25 amp hour pack. Range in reality is how much power in your battery and how fast you consume it. The ASI controllers let you use it fast. But you can also tone it down. I often do. Despite the videos most riding I do is cruising and trail riding for enjoyment or commute. Cheers
@joblessalex
4 жыл бұрын
@@HighVoltageKits Only 30 on a 25ah pack? Should be at least 60, if not 80
@HighVoltageKits
4 жыл бұрын
It used to be but the capacity has dropped over time and I usually only charge to 90% So running full power is consuming twice as much as before. I like to be conservative with range. How far and fast would be a balancing act for the individual rider. Cheers!
@malcolmbooth5656
4 жыл бұрын
Hi guys I have a 52v hailong battery 17ah with a 1000w bafang motor . Can I buy the asi bac 800 controller for this battery. As it says the controller is for a 72v battery?
@HighVoltageKits
4 жыл бұрын
It will work at 52 volts road at that for ages with the ERT kit. There are two places for a plug and play kit. ERT and Electron cycles.
@malcolmbooth5656
4 жыл бұрын
@@HighVoltageKits much appreciated cap. So it wont damage my battery ? Does it make the bike go faster or does it make the bike go further or should I say the battery go further in normal riding.?
@HighVoltageKits
4 жыл бұрын
It depends on the type of cells and bms of the battery. I may be not strong enough to take full advantage of the 800 or 855 as it is now. But it will give increased acceleration and top speed. Range will decrease if you are running it full power as the price of such performance is it consumes more power. Hope this helps. Cheers
@malcolmbooth5656
4 жыл бұрын
@@HighVoltageKits yes excellent so the bottom line is the 72v asi bac 800 is just a case of plug and play with my 52v battery no need for any re map or anything like that to suit my battery ?.
@Finnv893
4 жыл бұрын
Any noticeable range increase?
@HighVoltageKits
4 жыл бұрын
If you run full power with this controller you will reduce your range considerably. Probably half. But range is only a product of how much power you consume so you could run it at reduced power for greater range and I often do. You could use a larger battery. The big thing about the ASI is the much higher spec of the internal components and potential for a much smoother ride.
@grahamfisher2990
2 жыл бұрын
Where can I buy one
@HighVoltageKits
2 жыл бұрын
We do a kit but waiting on more controllers due in July.
@kaywoodparsons1874
3 жыл бұрын
Will this controller work on the bshd 750?
@HighVoltageKits
3 жыл бұрын
We have a few folks using it with the BBS02. It will work but you need to limit the power to about 2200. But a nice boost in top speed etc. If you join the discord channel via the link on the description you can chat to the guys using the kit on this motor. Let me know if you have any problems with discord. Best to install the app before clicking the link. Cheers
@gregorydriessen5681
5 ай бұрын
Vedio how to buy one
@thomasjurd172
3 жыл бұрын
My bbso2b 48v 750w does a steady 28mph on level 5 . Then lose power on a slight grade . Luna sell these controllers on the bare bone motor i beleave . Would be nice if Eric sold it seperare .or toying with a cyclone from luna to the UK ,mabee cap
@HighVoltageKits
3 жыл бұрын
I would not get anything ASI from luna. The cyclone is not runnable with the ASI. If you really want to use that one do some research on endless sphere to see what people used maybe.
@thomasjurd172
3 жыл бұрын
Cheers , i was looking into there batterys at luna , or em3 paul for the 72v biggest ah i can find . Would be cheaper to just do my driving test again lol. I thought eric was the man cap . He comes over " hes so pasionate about making the best batterys out there . By looking at your early stuff and where you are now in the ebike world of knowledge ! Your well in frontvof me . Only just got my 1st solde iron at 51 . I dont want to buy the bbshd and then think if only i bought the cyclone !!!!: lots out there to study . I see your pnto making your own cells now so good luck cap
@thomasjurd172
3 жыл бұрын
@@HighVoltageKits imagin holland cap . Been through about 5 times on my waycto germany working . Flat as far as you can see crazzy
@HighVoltageKits
3 жыл бұрын
It is well known in ebike circles that Eric is pure cancer. Im not going to say more but he is pretty much the Donald Trump of the ebike world. His path is literred with people he has ripped off betrayed and double crossed. Check out litespeedbikes for 72 volts. Chris makes a really good pack. It's what I use.
@thomasjurd172
3 жыл бұрын
@@HighVoltageKits well only just got into it the last 3 months and should have waited and read more . But im not un happy with the little bbso2b . You read so much of others veiws about so many things cap . Do you think a 52v 17.5 or 20 ah would be a better ride than the 48v 17.5 lm running now ? . I wasnt aware eric was a bit of a snake like that , apart from 1 thing i read 2 days ago that theres a smear campaine from other companys . Read this in a thread about the new controler in the bbshd thats 50amp now . And he wont sell them seperatley . I cant recall how old the thread was . But thanks for the heads up from one brit to another !!! About the 52v ?
@MustyBastard
5 жыл бұрын
Can I buy this anywhere in Canada? Id hate to buy a Canadian product from a American reseller
@HighVoltageKits
5 жыл бұрын
I tried to do this but even buying direct from ASI and its US dollars as they ship worldwide so just price in the greenback. It's cheaper and plug and play from ERT but more expensive and you get support and bacdoor app access directly. But no way out of US dollars right now.
@MustyBastard
5 жыл бұрын
@@HighVoltageKits Oh, alright, thanks. With conversion this controller is more than half of what the original kit cost.. sigh...
@HighVoltageKits
5 жыл бұрын
Yeah nothing cheap in this business. though if you are replacing a car it's a bargain.... I get burned as the exchange from us to Canada dollars sucks right now.
@MustyBastard
5 жыл бұрын
@@HighVoltageKits I am in the same boat as well being Canadian. We are working on 65 cent dollars, which makes life even more difficult. I agree, it is a great cheap alternative to owning a car, buy sadly I drive a huge Diesel F350 and only use the bike for leisure. I was thinking next spring I may start taking my bike to work and just leaving the beast parked at home. Have a great weekend ! Looks like you are in Kelowna, which a lot better than living in Edmonton. 9 months of winter really sucks lol
@HighVoltageKits
5 жыл бұрын
I spent 5 years in Cold Lake so I know what Alberta winters are like! Drove a few f350's too. Thirsty beasts but super fun.
@commonsense4207
2 жыл бұрын
I have Done NOTHING to my BBSHD and it does 48MPH or 77.2KPH in 7th Gear 64 Tooth in the Front Drive Gear and the Rear is 13-32 Tooth I go up Very Steep hills at 24MPH or 38.6KPH in 3rd Gear and it is 48 Volt 17.5 Ah 13S7P and the Motor Pulls 1,000 Watts Continuous and 1,500 Watts Peak and My Weight is 210Lb and my Bag I Carry with my Tools is 50lb. You Don't need to push the BBSHD to it is Burned up. I have over 1,287 Miles on my BBSHD and go's like when it was Brand New. Don't Waste your Money with Hub Motors.
@HighVoltageKits
2 жыл бұрын
Yeah. If you put on a huge front gear and have the right setup you can hit high speeds. This controller does it in a slightly different way but no worries on burning up either. Cheers
@gregorydriessen5681
5 ай бұрын
How can I get a control buy one
@Bobster0007
4 жыл бұрын
I just tried to buy the BAC 800 from electricrt.com and its not available anymore?
@dasppg9737
4 жыл бұрын
I just ordered one and I'd thought the same thing. Turns out you have to join the site to see the add to cart button. Kinda stupid. Never seen I site like that before.
@warlockboyburns
4 жыл бұрын
I'd never have a mid drive without using an internal geared hub.
@HighVoltageKits
4 жыл бұрын
Supposedly there is a sturmy archer hub that can handle 3kw. The problem is most hubs can't handle the higher power. I love the rohlhoff ones but at 1500 bucks it's the cost of two batteries. Then if it gets wrecked....
@warlockboyburns
4 жыл бұрын
@@HighVoltageKits if you release the throttle every time you shift like you're supposed to there shouldn't be a problem.
@HighVoltageKits
4 жыл бұрын
Yeah I do try and practice good housekeeping. I will keep it in mind. My dollars have to stretch far so maybe a future project. I have a 7 speed nexus on my bamboo bike so perhaps it may get converted down the road. With the nxt display the gear change sensor may well become tunable so that would also help with internal hubs. You make a good point
@super-sim1665
5 жыл бұрын
Spins way faster than stock.
@HighVoltageKits
5 жыл бұрын
Yeah it has field weakening.
@joeows6537
3 жыл бұрын
Nice! I am gonna order from Luna next February. This is what I am getting. lunacycle.com/luna-fat-galaxy-pedal-bike-only/ I will order a BBSHD a few months after and finish it up with a Phase Runner and a 72 volt battery. 50 Amps continuous and 70 amps peak. I figure if your gonna do it, might as well "Overdue it"... My aim is to be able to roll up and down the hills of Northern Michigan roads yet not suffer range anxiety. I enjoy the videos... stay safe and wear your ski's when riding your ebike in the snow... makes for excellent cornering! (With a dropper seat post).
@HighVoltageKits
3 жыл бұрын
That looks decent! Keep me posted. If you want advice / questions etc feel free to join the channel discord group
@joeows6537
3 жыл бұрын
@@HighVoltageKits Aye from da U.P. aye!
@77Fmydog
Жыл бұрын
this was not very good review. went threw tons of touble to review but none of us will use it this way. useless
@HighVoltageKits
Жыл бұрын
They don't even make this controller anymore, its the BAC855 now. ERT is no more. I made this video over two years ago. I am not sure I understand what you mean "none of us will use it this way?" Who is us? Yourself or do you speak for an organization? Thanks for the comment and I appreciate constructive criticism but this is not helping me Chris.
Пікірлер: 233