This is really great. I am so nervous to sew the X into the shirt, but seeing you do it really helps. I now know how to do it and will refer to this as I'm sewing. Thanks it really helps!
@StephanieStone
5 жыл бұрын
I'm so glad to hear that!! I think the X is definitely the hardest part to sew into the shirt and I went through it so many times that when I was filming this tutorial I wanted to do my best to share what I had learned to help out others haha. Thanks so much for letting me know! I appreciate it 😁 Good luck!
@falilatnoutai3606
5 жыл бұрын
Love? Leave a comment down below 😉
@falilatnoutai3606
5 жыл бұрын
It's meeeeeeeeeeeeeee 😀😇😇😇😇😇😇😇
@falilatnoutai3606
5 жыл бұрын
@@StephanieStone good 😇😇😇😇
@Hello..0
3 жыл бұрын
Hello stan 😊
@vexellent
5 жыл бұрын
I only have the collar to make and sleeves to attach have tons of great feedback on the whole thing! Firstly, I made a size small and used just under 1.5 yards of black spandex, 1 1/4 would have been enough but 1.5 is perfect in case of mistakes! I was cheap so I got like 1/4 or 1/3 yd of orange and cut the X as 2 separate pieces (seam vertical down the center). This left plenty for adding arm strips as you mentioned in the video. You need 3 yes of knit interfacing. I got 2 yards of stretch knit interfacing and it wasnt enough to interface the sleeves, I suggest 3 yards to be safe since is so much narrower than fabric, especially if you want to align it with the grain (which I didnt). 1/2 yd of stiff interfacing should be plenty, I got a yard cause it's so cheap (I paid 3.99 for a yard) My neck piece also had an extra inch of overhand at the top, but I just trimmed it and it was great. The X being cut in half wound up being a GREAT IDEA. It ended up making the narrow Vs on the front SUPER easy! Got both perfect on the first pass, only had some bunching near the edge from uneven pinning. If your seams looks funny, lay it inside out and use a damp press cloth to iron the seams flat (use wool or steam setting on iron, pres and wiggle it for 4 or 5 second per section of seam, also great for getting rid of dents from pins if u use pins instead of clips) I hope this helps some people!
@Tony_Stark330
Жыл бұрын
Quick question, was there any printing instructions I missed? If not, what settings did you use if you remember
@abyanchowdhury1667
7 ай бұрын
Love it!!
@ppkecik08
3 жыл бұрын
i dont really know how to sew yet but this would be helpful in the future when i have all the fabrics!
@girlstrangerlove
5 жыл бұрын
I am a XS, what should i do? I only saw S :c Also, thank you so much for making this vídeo! Nowadays, people don't like to help others for free, you are really kind :c
@StephanieStone
5 жыл бұрын
I can make an XS for you! I wasn't sure if people would want an XS size but I can do it. I will be gone for a week due to a convention but once I return I can modify it :) And thank you so much for watching my video! I am happy to help, especially when it comes to making Bakugou's top like 5-6 times/variations hehe. All that experience has to be put to use!
@xxdave70xx
2 жыл бұрын
I'm excited to do it soon. Have to wait for the fabrics. :D
@elyxircreations1003
Жыл бұрын
Bruh why am I deciding my first homemade cosplay outfit would be bakugous hero costume? I dont even know how to sew and now I gotta learn lol
@justamberish
2 жыл бұрын
When you wanna do this but don’t have a sewing machine: 🥲
@toasteroven151
4 жыл бұрын
How much Fabric do you need it for the Orange and Black stretch Fabric?
@KVHanawaltVO
3 жыл бұрын
Is it possible that you can use this template for his tank top version?
@StephanieStone
2 жыл бұрын
Totally 100% :) you just have to modify it a little of course; I believe reorient the top of the X a little higher, but it's essentially the same
@Kagome1102
2 жыл бұрын
Hi, can you help me? I'm from Europe, we use cm not inches, but I converted my measurements and give me size M but it's small and now I'm afraid to go L and it's small to, could you help me check if I go L ou XL? Thank you
@InTheNorm
4 жыл бұрын
is there a way to modify this to add a zipper down the front?
@jadenisemotional610
3 жыл бұрын
I personally recommend adding a zipper to the back instead of the front. Just look up a tutorial on sewing on zippers and it should be pretty easy.
@ruahmim
3 жыл бұрын
Currently making the shirt and I cut everything the right size and used the right seam allowance for everything, but the collar and sleeves were way too big for the main torso of the shirt and had to be shortened and taken in by quite a bit. Did anyone else expirience this problem?
@Yunaresuka
2 жыл бұрын
I haven't attached the collar yet but my sleeves were def too big on the size S
@hinatahyuuga120
3 жыл бұрын
Just a curious question since I struggle with knits. Does this pattern work for woven if I was to add a zipper to it?
@StephanieStone
3 жыл бұрын
You can make it work! You'd have to double check the size to make sure it fits because this was made to fit snugly with a knit so I feel like if you tried your regular size with a woven, it wouldn't fit so as long as you compensate for extra fabric and a zipper, it's possible!
@hinatahyuuga120
3 жыл бұрын
@@StephanieStone awesome I a bigger fan of working with cotton ot wool any way. I'm looking to make this warm for a katsucon photoshoot outdoors so I have a better idea now :)
@StephanieStone
3 жыл бұрын
@@hinatahyuuga120 I totally understand haha I definitely prefer working with wovens over knits! if you have any more questions feel free to DM me on IG or email me too!
@christinelynch4200
3 жыл бұрын
I have this pattern but I can not find the yardage for the medium, can you tell me how much you used in black and orange ...also interfacing? Thank you
@reicosplay
2 жыл бұрын
I have all my pieces cut out but does the collar need to stretch horizontally? It’s the only piece that I didn’t cut out with horizontal stretch and I’m just worried that maybe I should recut that piece
@StephanieStone
2 жыл бұрын
The collar piece will depend on how snug you want it against your face! It shouldn't really have to stretch so you should be fine.
@Psweet57
4 жыл бұрын
Could I essentially use HTV for the orange x ?
@StephanieStone
4 жыл бұрын
Yeah I don't see why not! It just might crack and wear away over time
@Psweet57
4 жыл бұрын
@@StephanieStone thanks for the response! Im not the best at sewing and figured id take advantage of my cricut lol
@Hearts_4_Jesus278
4 жыл бұрын
please o ly reply if you know where i can buy ome or find a plain balck jaket simialr thid hid that i can make if the suit coustom mades too expinsive thanks
@destructionmurder6104
4 жыл бұрын
You can buy a black long sleeve compression shirt and you’ll just have to add the X patterns and arm rings, as well as the buttons in the shoulders and the collar. A bit less work in my opinion but still more work than just buying the costume itself
@falilatnoutai3606
5 жыл бұрын
2019? May? 26th? Answer meeeee!!!!!!!!!😉😇Let me know come onnnnnn please note me Edit : love you Tristan fitts 😘🐈🐈🐰🐰🐱
@yogiibutt
6 ай бұрын
Do you happen to have the short sleeve version of this?
Пікірлер: 37