Try solid copper wire from 12-2 romex electrical wire. Super glue the striped copper wire to the inside similar to where you put your putty. I use about 1/8" pieces at a time. And it does t fall out. I do that for touring to drag and all in between. Excellent video.
@ruftime
3 жыл бұрын
Thanks Greg! That topflite balancer has been a good friend for more years than I can remember. From tiny boat props on up😎
@bobtierney6946
4 жыл бұрын
any hobby shop that carries RC aircraft will have these. They are a prop ballencer.
@covecityboys
Жыл бұрын
That balancer doubles as a Turkey call too.
@zdattonejones6709
2 жыл бұрын
I just learned something. It's very nice to have this information. Thanks for the information sir.
@richardbrown6762
3 ай бұрын
I've been doing this for 20 years now but I never told anyone that 😂😂
@patriotrob7066
4 жыл бұрын
We don't balance slicks on real drag cars. Weights won't stay on and to dangerous . I run 8.20s with un balanced rear tires Butt after this video I just ordered those rim's and the outlaw drag tires 👍
@Blownblackknight
3 жыл бұрын
Use stick on weights and thin tape I use a aluminum type tape for this never come off that way.... just make sure tape sticks good never had a problem
@theclan4adventures
3 жыл бұрын
Pretty sure your not pulling 400-800mph in the quarter in your 8.20 car. Even still you should get them balanced with tape and you’ll notice it. Every tiny vibration matters 1:1 cars and even on rc cars.
@Rob-tl9md
3 жыл бұрын
bikes will run 200 with stick on weights.
@GuitarGuys7299
3 жыл бұрын
R/C car setup's are just as important as a real car.
@soundmindtv2911
3 жыл бұрын
Thanks, Gregg. Very helpful. (Nitrous Fed sent me)
@12R1rcbashr
3 жыл бұрын
Great video man thanks for sharing happy bashing bud.
@Speedy123youknowme
3 жыл бұрын
Man we are getting old aren’t we? You have about as much grey as I do! Lmao
@TroyBest
2 жыл бұрын
You need to balance your balancer. The rod in the middle should float hardly touching the magnets if it touches then at all. Should almost look like a magic act floating in there. Hope that makes sense
@codyalt5871
2 жыл бұрын
Would balancing on the car be better? Tire could be stright but not stright with car?
@BoooRocK
2 жыл бұрын
I checked several videos and nobody shared a link for a tire balancer… how hard is it to share the link fir those cheap balancer you keep bragging about.?!!!
@TheBlueberry606
3 жыл бұрын
Great tips
@mr.h.5205
3 жыл бұрын
I THANK YOU GREAT 👍
@terryhildreth9854
3 жыл бұрын
Do you tape your foams to control ballooning
@ClipDog
4 жыл бұрын
I definitely learned something from this video, can you tell me where you can get one of those balancers?
@guidelineuk
3 жыл бұрын
That's a no then....🤐
@Gregorybridgewater
3 жыл бұрын
You can get a tire balancer from amain.com
@trippegelston6574
2 жыл бұрын
Why do u have holes in your tires
@tigweld4you
3 жыл бұрын
👍👍👍
@Bassin07Si
4 жыл бұрын
What rims are those??
@Gregorybridgewater
4 жыл бұрын
DE Racing Gambler Sprint Wheels
@Bassin07Si
4 жыл бұрын
@@Gregorybridgewater i noticed it says mini street outlaw.. are they more narrow than a normal proline or jconcepts
@Gregorybridgewater
3 жыл бұрын
Not mini Street outlaws, they sell regular street outlaw slicks. Mini is for buggies
@cslate36
2 жыл бұрын
Fell asleep
@lildriverc697
2 жыл бұрын
So boring get to it allrety
@richardbrown6762
3 ай бұрын
I've been doing this for 20 years now but I never told anyone that 😂😂
Пікірлер: 33