I like how you explained to bail when the hay is not in perfect condition!
@bw3368
2 жыл бұрын
Check the main plug you have a pin pushed back in the connector
@chrisevansgunshorsesranchi699
2 жыл бұрын
I had that once before but it was showing an error code. But I will check the plug. Thanks for watching and thanks for the comment.
@bw3368
2 жыл бұрын
Most of the time when they throw a error code it's in the plug the pins won't look like there pushed back but they will be unlocked in the connector ive had some trouble out of my 469 for the same thing
@chrisevansgunshorsesranchi699
2 жыл бұрын
@@bw3368 Have you found a good fix? I have pushed one of the pins back in place a couple of times. Now i always disconnect it from the monitor inside the tractor. I taped the heck out of the pig tail plug and leave it plugged in all the time.
@bw3368
2 жыл бұрын
The only thing I've found that helps is either replace the plug and pins or pull the pins out of the old one and bend the lock ears on the pins out to make them hold tighter that is what causes them to push back is the lock ears bend on them
@chrisevansgunshorsesranchi699
2 жыл бұрын
@@bw3368Thanks I didnt realize that you could replace the plug. I though you had to replace the whole harness.
@nalley6815
2 жыл бұрын
Set your monitor to 58.5. You do not want to accidentally make an oversized bale. It can destroy that baler. Costs $10,000 to fix it. Otherwise good balers. Mine had electrical gremlins
@chrisevansgunshorsesranchi699
2 жыл бұрын
Thanks for the comment. I have had mine set at 59"" . But I will change it 58.5"".
@nalley6815
2 жыл бұрын
@@chrisevansgunshorsesranchi699 next baler I get will be a 4x6 baler if I can’t get ahold of a 5x6. Even making 4x5 bales. If you make full 5’ bales with a 5’ baler it’ll wear it out a lot faster. Make 5’ bales with a 6’ baler and it’ll last forever. The Deere 4x5 and 5x5 balers are notorious for breaking the tension arm making too many oversized bales. Very very expensive. It sure did make some pretty bales when I had it though. Keep your net brush clean too!
@chrisevansgunshorsesranchi699
2 жыл бұрын
@@nalley6815 I have been lifting the gate open about half way and pressure washing the brush area. Do think I need to do something else?
@nalley6815
2 жыл бұрын
@@chrisevansgunshorsesranchi699 gosh I can’t remember exactly how to get to it. Sold it awhile ago. I think under the metal roller for the netwrap it’ll be 4 or 5 nuts to take off and the brush comes right out. Air hose and back on. I had to keep mine clean or the net would tangle in it and cause the biggest mess you’d ever seen. Pain in the butt
@chrisevansgunshorsesranchi699
2 жыл бұрын
@@nalley6815 I am in-between crops right now maybe i will take it out and clean it. Once in a while i get a bale that the net does not cover completely. Maybe cleaning the brush will help. Thanks for your comments. I need all the help i can get with the farm equipment.
Пікірлер: 21