This applies to Citroen, Peugeot and DS.
You need only 2 sockets:
-21mm socket for the ball-joint nut.
-41mm deep socket for the ball-joint.
I made this very simple and straightforward.
1. Remove the wheel
2. Remove the nut that attach the ball-joint to the wishbone with 21mm socket.
3. Use a joint splitter if you have one or heat 🔥 the wishbone with a heat gun and hammer it down.
4. Use the 41mm deep socket to remove the ball-joint.
5. Apply few drops💧of lock- thread on the new ball-joint, put it in and tighten it.
6. Lock the ball-joint as shown on the video.
7. Put back the wishbone and the 21mm nut and put back the wheel.
More information is on the video. If you have a question, query or a suggestion please comment below.
Thank you for watching 👍.
Негізгі бет BALL-JOINT REPLACEMENT
Пікірлер: 42