THIS should be the model on How To Make an Instructional Video. There's no two-minute intro, no stupid music, no begging to 'like' the vid, etc. It's completely direct, to the point, and clearly explained. BRAVO!
@tatakatakashi
2 жыл бұрын
This is the kind of YT video I love - no fancy graphics - intro is literally on paper, but teaches you solid, valuable skills you can use right away. Cheers mate well done~
@RobertSweeneyFYIAD
4 жыл бұрын
Thank you, this is great content. Having that practice block (with the 90°, tight curve, etc.) Is a great way to learn and teach new techniques.
@DebyEnlowStagliano
6 жыл бұрын
Thank you, James, for the great tips. I've had a scroll saw for years and just ordered a band saw. While waiting for it to arrive, I'm watching tutorial videos because I know there are some significant differences. This was very informative. Keep up the good work.
@airraider
6 жыл бұрын
what brand did you choose?
@markb8954
2 жыл бұрын
Excellent. Simple yet I learned a ton. I usually cut bowl blanks out & don’t practice enough on small items. 👍
@spinzwood8290
7 жыл бұрын
Good tutorial IMO. It never ceases to amaze me that there are a bunch of know it alls that just have to make snarky comments. I'm a relative beginner and can always learn from how someone else does an easy job. Thanks James. Keep 'em coming.
@dwightstewart7181
5 жыл бұрын
Perhaps those "snarky" "know-it-alls" know a bit more than you, or this guy. Come on, he's using a felt tip maker to mark his lines. Did he mention that bandsaw blades come in various sizes, including ones for really tight curves? Don't judge a tutorial, or others trying to offer advice, until you're skilled enough to legitimately do so.
@oldmanpottering
5 жыл бұрын
Good points, thanks mate
@Jamming4Jesus1
5 жыл бұрын
@@dwightstewart7181 and this from someone that does not have any material or videos either
@maxximumb
4 жыл бұрын
@@dwightstewart7181 I'm guessing he used the marker so his lines showed up clearly on camera. Also the video title says tips, not the experts guide, These are all good tips for the beginner.
@zaraking2711
5 жыл бұрын
I am going to buy a band saw this week and this really helped me knowing these tips. Thank you.
@siobhanlaura8868
6 жыл бұрын
Great video, getting my first bandsaw tomorrow so this has helped me , i will use your techniques with my scoll saw as some angles get tricky ..thanks James :-)
@jamesjelley8159
3 жыл бұрын
I just bought a new band saw and I watched your presentation, and was very impressed. Thanks. Jake
@Dan-tv1sm
5 жыл бұрын
Thanks for the tips, James. I will certainly use them.
@jamesdale8987
4 жыл бұрын
Really helpful. Just acquired a bandsaw and this is just the guidance I need. Thanks!
@alicerosa6766
5 жыл бұрын
Thank you so much for this helpful guide, I have learned something that definitely is going to help me because I have a scroll machine and I have not much practice on it lol. This is an awesome idea👍👍😊.
@nigelcityfan1
2 жыл бұрын
New to using a band saw and this was an excellent tutorial - THANK YOU!
@AlForte13
6 жыл бұрын
Thanks for the tips! I could hear you well. And the arrows did help in your description of the direction of the cuts - Al
@DavidEricPrates
7 жыл бұрын
Excellent demonstration!!👍🏽
@hexmaniacmarie5654
Жыл бұрын
This is so incredibly helpful as a beginner, thank you so much!!
@brianoberhausen5153
5 жыл бұрын
Just got a band saw. This helped me. Thanks
@collincourtois8587
5 жыл бұрын
Really appreciate this video as I'm considering purchasing my first band saw. Thanks.
@scott8351
2 жыл бұрын
Thanks! Just picked up a delta, it's great. Good tips!
@artsychic2000
5 жыл бұрын
just started using a band saw. Got a carter guide. Wise advise given here with respect to the guide height. Even with the carter guide I forget to do check the height.
@markharris5771
5 жыл бұрын
Thank you, I’m getting my bandsaw tomorrow with zero experience and Im sure this video is going to be very useful.
@shamzz8305
3 жыл бұрын
@@clowns2theleftofme352 lmao
@TheMoppersmurf
5 жыл бұрын
Thank you very much for these usefull tips. That's what a beginner like me helps to start in a good way!
@contessa.adella
2 жыл бұрын
Just got a bandsaw (2022)….Soaking up all this great info right now…TY😁
@pizzawarlord9232
5 жыл бұрын
As a novice to band saws I learned a lot. Thanks
@dlipp23
11 ай бұрын
Thanks! Just got a bandsaw so this was very helpful.
@wheat1buck
6 жыл бұрын
Nice, clean and precise presentation! BTW what width band are you using?
@stevenA44
Жыл бұрын
Handy tips that I had forgot about since my high school woodshop days.
@mmtcbc
5 жыл бұрын
Thank you very much for helping people just like this. The tutorial is very clear.
@MiskimVeniceJohnson
3 жыл бұрын
Thank you so very much for your time and teaching me. Be blessed 🙏
@foxmoulder7724
Жыл бұрын
Greats tips! I didn't know the term for it Relief cut's
@davidahart2476
10 ай бұрын
Great video James, I recently purchased a used craftsman 10" bandsaw, what size blade would you recommend for a beginner? It can handle 1/8 to 1/2 " width blade.
@nakusflies593
11 ай бұрын
Great video. Thanks. PS What size blade is that and what causes the sparks?
@baileysbootstraps8170
7 жыл бұрын
Great vid for a learner ! Thanks. I'm presuming you're using a 1/4 inch blade ? Would be nice to know.
@borymcpherson797
6 жыл бұрын
Great video for cutting curves and square corners. I enjoyed watching your video.
@ProfSimonHolland
5 жыл бұрын
Thanks for the cool techniques
@andybranson3690
6 жыл бұрын
Great video , I have watched this 3 times this week alone. Cant get my bandsaw to cut curves in both directions, any ideas? I notice my saw has two speeds , of which it is factory set at the slower speed , would this make a difference
@tedfinkenauer42
4 жыл бұрын
Very nice. Thank you. BTW, I actually stepped back when I saw that bandsaw sparking. Too funny
@frettnot
7 жыл бұрын
thank you, I was so scared, now I know how to be cautious
@billbonner3637
6 жыл бұрын
Frett Not I
@venom1512
4 жыл бұрын
You are an excellent teacher. Thank you so much.
@casselsdiego
3 жыл бұрын
Thank you for this quick tips, very useful!
@Noddi1964
7 жыл бұрын
Hi, this helps me very much. Thank you.
@katiedangelo404
2 жыл бұрын
When you cut the 3 sided hole... my mind was blown... im very new to all this and it was just so perfect
@tobyogden9302
4 жыл бұрын
Btw the gullet of the blade needs to be in the centre of the crowned wheel so the guides stop it from fishtailing and that will help your accuracy
@petersharp90
3 жыл бұрын
6:12 - for me, pulling the work piece back out usually results in the blade coming off the wheels.
@SomeDudeOnline
3 жыл бұрын
Might just need to slow down and give it some wiggle wiggles but it sounds like you probably don’t have enough tension on your blade.
@DavidDavid-nl2ru
5 жыл бұрын
Can you do a video on blades, I just purchased a band saw and need some help on blade choice and info on the teeth per inch.
@lawnmower252
3 жыл бұрын
Just google it
@ronthornton2583
5 жыл бұрын
Wow!! What fantastic tips. Boy, was I sure doing it wrong. Thanks heaps.
@AnthonyFrancisJones
2 жыл бұрын
Excellent - just what I needed to know. Very informative. Many thanks!
@mversantvoort
6 жыл бұрын
Some great tips, thanks!
@PeranMe
7 жыл бұрын
Best tutorial on relief cuts I've seen so far! Thanks for sharing this!
@stephenbrown2922
5 жыл бұрын
Just got a new band-saw too. Still learning. Thanks for the helpful video.
@Noteven0
9 ай бұрын
Brilliant! Thank you!!
@tonyprice5726
5 жыл бұрын
People forget that there are newbies comming along behind them
@haiyanqu698
5 жыл бұрын
Thanks so much for the education, this is great!!
@ArberMakri
6 жыл бұрын
Awesome tips!
@sheepleslayer586
5 жыл бұрын
Well done. Worth watching. Thanks for sharing your knowledge.
@mostrico
5 жыл бұрын
#James Wilson Awesome Tutorial man, thank you for sharing!
@musratchoudhury7323
3 жыл бұрын
Thank you for posting the tips!
@lohengrinknight
5 жыл бұрын
Thanks for the video! You may need to tune up your band saw. The bearing should not touch the blade when not cutting. Most likely you did that by this point.
@andresjr.baybay2555
Жыл бұрын
thanks very important basic tips for me as a beginner here 5 star and more power to your channel......new subscriber here
@therealdiehl4671
6 жыл бұрын
I've done some wood working. Built one set of kitchen cabinets. Never have used a band saw. Been watching various videos, may be elementary but helpful none the less. To all those complainers, you can always change the channel.
@SuperskillsCoUkTraining
3 жыл бұрын
That's really helpful - and very well presented!
@perra7077
6 жыл бұрын
Thanks very useful info on bandsaw trix greets from Sweden
@PerrynBecky
2 жыл бұрын
Looks good. Any tips on preventing blade drift on a cheapo Harbor Freight special? Can't afford a better saw, I'm a rank amateur woodworker, so it's still better than rocking a jigsaw.
@camilookuinghttons2690
5 жыл бұрын
THANK YOU! Great video!
@insecteater1
4 жыл бұрын
Awesome tips. But the thing which grabbed me was the captions in the beginning of the clip :D :D :D
@MrGman2000watts
3 жыл бұрын
Great video. Would a scroll saw be better for this application?
@americoapoloramirezramblas9277
3 жыл бұрын
Usted merece más suscriptores!!! Saludos desde México
@melvis2017
Жыл бұрын
Thanks for those tips appreciations great job 🇩🇰👍
@waynemorris5516
6 жыл бұрын
thanks . just got my saw . great tips.
@charliesolorzano8457
3 жыл бұрын
Great video . Question when doing these types of cuts is it better to use a skinny blade or do it not matter what size bade is being used thanks
@SomeDudeOnline
3 жыл бұрын
Depends on the wood you’re cutting through and how many relief cuts you’re willing to make. Thicker wood usually calls for bigger blades. Tighter turns usually call for smaller blades.
@davo7512
3 жыл бұрын
What happens if the relief cuts or small off cuts fall into the blade insert thingo
@gregnarez
5 жыл бұрын
Good info for a guy yet to unpack his ryobi ban saw.
@algorel4763
5 жыл бұрын
Nice video! That’s how it’s done in a machine shop cutting steel also.
@stryker2764
6 жыл бұрын
Good video thanks for showing us this trick!
@micheleporcu2287
9 ай бұрын
always good to watch useful videos like this one. Tnx 4 sharing man !
@Bunnyhopper1970
6 жыл бұрын
This was a big help thanks
@melissabarron1574
5 жыл бұрын
Thank you! Great Tips
@jbn0613
Жыл бұрын
Good information. Thanks for sharing.
@JRWarfield
4 жыл бұрын
Thank you so much such a great video
@danielchao6635
Жыл бұрын
Does it come with a blade?
@gabrielmamaloukos8400
4 жыл бұрын
Hi. Where can I get spare parts for this saw. That part with the bearing and those left and right things a ma gicks. What are they called?
@bluebarra7905
6 жыл бұрын
have watched this 3 times this week , a great video , still cant get my new 14" b/s with a 1/2" blade to cut straight or curves on both sides , any ideas?
@Ghryst
6 жыл бұрын
setup the machine guides, tension the blade
@MrHarpless
5 жыл бұрын
Wow, Great tutorial!
@pappafett9826
Жыл бұрын
Great video..this really helped me alot😊
@BRExteriorPro
5 жыл бұрын
Nice video man. Thank you that helps
@wgenfair
5 жыл бұрын
For sure helps a lot.
@danmoreton1788
Жыл бұрын
Good tutorial on how to use a bandsaw.
@salvistoscano
7 жыл бұрын
that was a very nice and informative video. good show, thank you.
@marycummins8979
Жыл бұрын
Thank you easy excellent for me to practice. I just subscribed to you also. Great job
@randyhinson9115
3 жыл бұрын
Just got first b saw u help greatly!T.y.
@josetonon5726
4 жыл бұрын
Muito boa sua dicas. Obrigado amigo.
@theresacurrin6395
2 жыл бұрын
Very well done! Thanks for the information 👏👏👏
@StandardNegative
5 жыл бұрын
Why is it sparking and why is there no alarm that it’s happening?
Пікірлер: 210