I used a guitar pick to get mine loose and 3M adhesive remover. As far as the cold one, make it about a cold 8. That orange on the black looks sharp, nice work! Really appreciate you traveling back 2000 years to post this!
@Mrjackietreehorn
4 жыл бұрын
Orange black Color combo looks great I found some cvo badges on Amazon I’m gonna slap on mine. Sick brotha
@FriedBalonyPony
4 жыл бұрын
Taking that adhesive off is a test in patience for sure. Great job.
@SAVAGE87able
4 жыл бұрын
It sure is better have a couple cold ones in hand lol
@joselucero6634
4 жыл бұрын
Job well done my dude, the bike looks great!
@SAVAGE87able
4 жыл бұрын
Thanks man much appreciated!
@phonson
4 жыл бұрын
Not going to lie, the look is astounding! Never realized how (outdated?) the Harley logo looked. Good job!
@SAVAGE87able
4 жыл бұрын
Thanks man! I agree the tank badges looks dated for such a sick looking bike.
@jdc03f
2 жыл бұрын
Thanks for making this! Those emblems look perfect
@SAVAGE87able
2 жыл бұрын
Thanks for dropping by and leaving a comment much appreciated!!
@canadianhienz57
4 жыл бұрын
Beautiful job! Great result 👍🏼 Thank you for posting!
@jamiesanders3572
3 жыл бұрын
Yo man I really like the video my man. That looks awesome the song at 3:34 is dope man. Thank you for the video!!
@EdWard-ju2gh
3 жыл бұрын
I think he did a great job applying considering that damn thing didn't want to adhere. Like he said though water + paper + perseverance= success. I bought the actual metal badges so I'll have to do something slightly different. I wish he would have shown us how he determined what his center was going to be.
@Rey-xj3te
3 жыл бұрын
Nice vid and that color looks good. Where did you get your lower fairing gloss speaker lids from?
@AwareWolfOnWheels
9 ай бұрын
Definitely my next job.
@warrenbeatty3301
2 жыл бұрын
@Swintnation who did you purchase those from? there are many that look terrible on the internet.
@captainobvious5349
26 күн бұрын
Bad ass!!! Link to the badge? Edit: NM Saw it!! Thanks
@brianluck84
2 жыл бұрын
I absolutely hate the emblem on the tank of my 07 ultra classic, but they got some painted lines leading to it and not sure what's under the badge to know if it will look dumber under it
@mattjustin3596
2 жыл бұрын
Great video man
@KK-bigkev
4 жыл бұрын
What measurements did ya use to center/position the badge for the tank sides? Looking to do the same...
@jasonbanks6798
Жыл бұрын
Nice job, looks awesome. Where do you get these?
@SAVAGE87able
Жыл бұрын
Homemade on a cricket machine lol
@patrickhollis5332
6 ай бұрын
ACRYSOL by Kent use to be good on vehicles if it’s still the same strength it was and didn’t hurt nothing but was amazing for glue
@kennethlewis1321
3 жыл бұрын
Do you know if they sell the emblems in a smaller size than the standard “3.7” or 4”? Need various options in smaller size to cover stock CVo mirror holes...
@ess_glide4427
3 жыл бұрын
Looks good. What size is the decal??
@chrispenny7599
4 жыл бұрын
Digging these videos bro I just recently purchased a 2020 Road Glide Standard! Getting a lot of Ideas for mine! I'm waiting on my tour pack to arrive and get installed! Then it's bars and mufflers!
@SAVAGE87able
4 жыл бұрын
I'm thinking about grabbing a tour pack for my future road trips
@brucefeist6266
3 жыл бұрын
Do you have a link for the emblems? Or did you get them through a dealer
@Carmelocolon1
3 жыл бұрын
What’s the size u use for this emblem project looks good..
@Djwiz2845237
3 жыл бұрын
What size is that emblem? Perfect fit!
@vswebster
2 жыл бұрын
This took me about 3 hours on my Breakout
@shopson0073
4 жыл бұрын
Great job!! Sick bagger brother. Where did you find the tank emblem, and how much was it?
@phattask
4 жыл бұрын
Nice job, looks so much better! I have the same stock emblem on my 18 Street Glide and absolutely hate it. Just out of curiosity what size decal did you use? On the site they have quite a few options but I'm assuming it was either the 4 or 5 inch.
@cheswic
2 жыл бұрын
Looks like 4”. I bought 3” and they’re too small. I put one on just for practice knowing it wouldn’t look right.
@harleybrown9834
4 жыл бұрын
Looks like a great (and cheaper) alternative to the embossed versions I've seen on IG. How have you found the longevity? Is it peeling on the edges at all? Thanks
@SAVAGE87able
4 жыл бұрын
So far no issues at all and I've hand washed the bike numerous times.
@tacostwowheels4934
4 жыл бұрын
Nice upload!!
@Sean-uc5vj
4 жыл бұрын
Thanks for the tip. What size is the emblem, 2in 3in?
@SAVAGE87able
4 жыл бұрын
3 Inches
@Sean-uc5vj
4 жыл бұрын
Thank you. Awesome looking bike!!!
@1973shovelhead
4 жыл бұрын
@@Sean-uc5vj I ordered the 3" emblems that you mentioned, but they are alot smaller than the ones you installed. Comparing it to the size of your sams club card im guessing they are 4" or 5""?
@miguelsalgado4673
3 жыл бұрын
What size is that decal
@Artbuckle1971
4 жыл бұрын
googone overnight and a credit card ..comes off one swipe..
@Sedge1962
3 жыл бұрын
the surface must not be made wet! unfortunately that is complete nonsense! always glue dry. it is not necessary to wet the surface at all.
Пікірлер: 48