GE Radio Mouse Unit : Funding the Madness - Still Better Than Netflix
@mammam6472
Жыл бұрын
TO HELP IN THE RESURRECTIONS....AND THANKS FOR THE SPECTACULAR VIDEO....
@volvo09
Жыл бұрын
That Radio Shack Nascar scanner was intended to pick up the bands nascar teams would talk on so you could hear them doing their thing at a race.
@GinnyHazleton
Жыл бұрын
I have a newer version of that radio with more bands on it. They can be hooked to a computer and programmed with the driver's name, frequency, and car number. They can be used to scan or you can type in a car number to hear them. You could listen to the officials and the comms driver and pits. Probably not too useful anymore as everything is digital and encrypted now.
@whitelion7976
Жыл бұрын
I was using a TV like the 2 at the beginning of the video during my US road trip in early 2000 and I found it at a service station in a trashcan. It got dropped and cracked the PC board. After using a gas soldering iron sitting on the end of the veranda of the station jumping tracks and people watching me I plugged it in the cigarette lighter jack and it jumped right on a station.. nice car tv.
@cocusar
Жыл бұрын
I actually feel really positive about all of these specimens, not only because you'll get some fun out trying to resurrect them, but also because it means a lot of content for us to enjoy. Thank you shango!
@KeyboardBuster
6 ай бұрын
Ditto, thank God it fell into shangos hands and not some soulless copper scrapper goof. It's made me cry blood thinking of the goodies from the 20s to modern vintage getting destroyed for a little bit of copper
@andyk3950
Жыл бұрын
1931 radio gets my vote. Great score of electronics!
@JerryEricsson
Жыл бұрын
When I was just beginning my work life, I worked at a truck plaza in Minnesota pumping fuel and gas We sold those little TV's and 8 track tape players, I was very good at pushing these items and actually got promoted to supervisor in about 4 months for my sales technique. While I never made my profession in sales, it was fun at the time.
@donmoore7785
Жыл бұрын
You probably could have sold used cars if you were able to sell that trash.
@stephenhall6595
5 ай бұрын
Your the best US vintage TV and Radio repairer on You Tube.
@bandersentv
Жыл бұрын
12JP4 used a little snap button HV connector and had no ion trap so they always have burns. I'm sure yours was replaced with a 12LP4 and they spliced in the more common anode connector.
@nickb.8876
Жыл бұрын
39:23 that Philco is a 54C. Neat little set, watch out for open coils. Especially in a Diaper lovers special like that. Great stuff!
@scottlangille9900
Жыл бұрын
What year 1930's?
@nickb.8876
Жыл бұрын
@@scottlangille9900Probably 1933/34
@W1RMD
Жыл бұрын
I have to ask myself why do I always wait until dinner time to watch your videos. Cool looking stuff though, and condiments come at no extra charge! Thanks for showing. Your videos are never boring!
@michaelpedde2313
Жыл бұрын
The Philco Radio's Model number is 57C made in 1933.. I hope this helps!
@radiotvphononut
Жыл бұрын
That Sears set was made by Sanyo (564 chassis number prefix) and I think it's one of the last Sears tube sets from about '75 (a bargain-basement set).
@bandersentv
Жыл бұрын
Did you forget you resurrected the same model Crosley a couple years ago? Crosley uses a 6AF7 eye tube. Similar to a Dumont RA-103 and very well made.
@MrCrystalcranium
Жыл бұрын
Yeah…commented on the brass screens behind the top ventilation slots
@bradstearns5384
Жыл бұрын
The Packard bell then the 2 scopes then the old wooden radios. Great video.
@donmoore7785
Жыл бұрын
FOUR eye tubes in one piece of equipment. Who needs an O-scope? Sweet collection.
@1McMurdoSilver
Жыл бұрын
I vote for the 7" Philcos and the early two Clough Brengle scopes
@foureyedchick
Жыл бұрын
When I was in High School there was a teacher who taught us how to use AV equipment. His name was Mr. Baurenfiend. Most kids called him Mr. B, but some called him Mr. Barn Find, not kidding!!! I thought of him when Paul uploaded this video!
@BillMorse-jr2ou
Жыл бұрын
this is a treat - thank you, Shango, for posting.... 1948 Crosley 87CQ radio/record player console with early FM headed for destruction. Five dollars ransom paid. After replacing the missing 5Y3 rectifier and a slow power up, the radio played SW and FM. AM? I suspect it was disabled by a technician who foresaw the coming of talk radio..... that's a joke, son.
@Suddenlyits1960
Жыл бұрын
That Philco needs a rat trap more than an ion trap.
@rdg2124
Жыл бұрын
Awesome finds, thanks for sharing. That 1931 GE radio looks interesting, can't wait to it resurrected.
@keithjordan7545
Жыл бұрын
I like the Clough Brendle scope and the RCA Chanlyst. I'd like to see them working, the RCA is rare!! Designed to be a one stop radio fixit tool.
@blobscott
Жыл бұрын
"Wow.. that is just so horrible, I might have to buy it." hahaha. I vote to give the graph-o-scope things a wake up call. I used to have a TEK 535 with some interesting plugins and tossed it because I thought it would be best to unclutter my life. Permanent regret.
@LyonsArcade
Жыл бұрын
That Crosley is ready for prime time. Beautiful little t.v. , I hope you're able to get her going!
@TheRadioShop
Жыл бұрын
That is a heap of vintage stuff. Like the old Clough Brengle equipment. I have the CB-10 signal generator. Did a tear down on it a few years back. Thanks for showing.
@herbertsusmann986
Жыл бұрын
That Crosley uses a DuMont RA-103 chassis. Solid chassis.
@50shadesofbeige88
Жыл бұрын
Best line of the whole video: "Mmmm flavor country".
@kevinkier6790
Жыл бұрын
I hope you do a fourth of July special video. It always warms my heart! 🎉🎊
@Fredy5100
Жыл бұрын
What a find... lots of history right there. My vote for first resurrection is that little Philco TV. There is something especially appeling for me in little roundies... Thank you for sharing all of this!
@directcurrent5751
Жыл бұрын
Roundies!
@JerryEricsson
Жыл бұрын
We had a little scope like that built into our Radio Teletype rig. It was used to tune the NSK/FSK signals before transmission. I thought it was cute but never really got a lot of use out of it. The fact that I learned OJT instead of attending the training center on that radio set, I guess I never really knew what the hell it was supposed to do. All I knew was how to operate it, I learned over in nam when they were pulling out troops and not replacing those who went home. I cross trained from switchboards to land line teletype, then to Radio Teletype. It. was a good thing as when I got back to the States and got my sergeant's stripes I got Communications Chief MOS and had my own section.
@rayislooking2
6 ай бұрын
I love the test equipment most then old radios then transistor radios then TV Thanks for sharing
@telocho
Жыл бұрын
The Norelco will be hard to ressurect. It needs another chassis as TV receiver. The tube inside the Schmidt optics will instanly burn whenever the raster is missing. There is protection circuitry to prevent this, but that can fail too and in general make fault finding difficult. You would at best use a sacrificial tube during fault finding. Searching for Protelgram will give lots of info on this. The EHT line transformer is made for 25kV which was high for the time, so it is canned an submerged in oil. Later it was analyzed in a lab by someone and it did not contain PCB’s. Dates around 1948-1953. I have myself a Philips TX701 but in non working state.
@johnsampson1096
Жыл бұрын
I believe the Chanaylst was unique, you could hook it up to all sections of the receiver, and observing the eye tubes would help identify a defective stage. Quite a feature in its day..................
@bpjr1899
10 ай бұрын
I enjoy your videos Thank you. I left So Cal many years ago. A fellow HAM.
@leftymuller
Жыл бұрын
fecal sprinkles LOL .. cracked me up
@bandersentv
Жыл бұрын
Oh man that poor Philco 702. Collectors love the Rider Chanalyst - 4 eye tube goodness.
@allanransby7119
Жыл бұрын
I find the test equipment very interesting. I've worked at an electronic company, repairing old fashion tube-color tv and audio. I'd liked the audio-division best. I believe that somehow I was good at repairing loudspeakers and amplifiers. My interess in Tandberg products really came up, and I bought all my own equipment: Oscilloscope, power supply etc. and then I've got marriaged and all the good stuff went down in the basement until it was flooded. I've lost all my components and equipment, so now I'm following youre side every week, and maybe some day I'll get back and build the amplifier I sometimes dream of. Good old fashion discrete components and really high-end stereo sound. Also on vinylplayer. Somehow it sounds better in my ears.
@Suddenlyits1960
Жыл бұрын
Shango,The Philco table radio at 37:55 is a Philco model 54C from 1933
@markmarkofkane8167
Жыл бұрын
Wow! Over an hour! 👍 The pair of tvs's after the projection type: looks something like my dad's slide projector. The shape, the handle on top. Really cool stuff
@douggrisack5916
Жыл бұрын
I have one those in good condition. Works good.
@mikefinn2101
Жыл бұрын
Nice barn find some good history. The 1931 radio is very rare and I hope you get it working. Love it when they tac in a cap instead of replacing. I hate it when they do that. another great Saturday Morning with Shango.
@TrevorsBench
Жыл бұрын
Lol, I love how they stamped "USA" on all those transistors in that HK Nobility radio. Notice they were stamped after they were soldered in
@mauryfeskanich4523
Жыл бұрын
I would love to see the Chanalyst get a full restoration. If you’re not really into that, maybe see if Paul Carlson is interested? In any case, nice haul! I look forward to the future videos!
@donmoore7785
Жыл бұрын
I think that is targeted for parts!
@Kinann
Жыл бұрын
6:24 My dad's bedroom tv, making us the first family to have a 2nd TV, a Zenith of course. Watched the winter olympics on Wide World of Sports on that thing.
@tarstarkusz
Жыл бұрын
49:05 Using arcade machines and monitors as a benchmark, I'd say very, very high to wear out a CRT. Most of these arcade machines were run 16 hours a day or more for years on end. Same with monitors. A lot of people just left them on all the time so they didn't have to wait for the boot the next day (in office buildings). Most of them still work fine when they are found. Though, to be fair, monitors and arcade machines went out of current generation in a relatively short time.
@bradstearns5384
Жыл бұрын
Arcade crts were made at the same time when house hold crts started lasting longer. My parents had a sears 27" console tv from 84 to 2000 and never had to adjust brightness on it. Damn thing ran for at least 8 hours a day. It had a vertical deflection cap dry up in about 92 that got replaced but that was it. We gave it away to a neighbor in 2000 and it still had a great picture.
@tarstarkusz
Жыл бұрын
@@bradstearns5384 All of the early Atari B&W arcade machines used a B&W TV. But you are correct about the later ones lasting longer as the technology matured.
@albear972
Жыл бұрын
Those small Deluxe TV's were all over the place from 1984-1990. They were sold by a couple of dozen brand names. And the good old days, I had a Bearcat 800XLT scanner when I was a teen. I loved listening to cell phones and cordless phones on it. It was very, very entertaining! I may have heard some talk about a drug deal or two, also fights over the phone. Gawd! I can only imagine how nasty those TVs with the rat crap smell. 🤢How about resurrecting that TV with the humongous electric chair transformer?
@markpirateuk
Жыл бұрын
Great haul, some real nice early TV's, my vote is for one of those.
@eigos
Жыл бұрын
13:21 ...the silence foretells the stuff Shango's about to say next. I just love this content so much...
@randyab9go188
Жыл бұрын
Excellent!! A 1" scope using a 913 tube. Always wanted one of those for the novelty value.😊
@QsTechService1
Жыл бұрын
Definitely can't wait to see that projector up and running that looks like some Sweet old technology
@billmyke746
Жыл бұрын
@4:00 May I suggest, Eol material. Or perhaps impact mitigation testing vs. rotational inertia. (Lawnmower test.)
@Skyler_Hagen
Жыл бұрын
That chanalyst deserves a proper restoration, that’s a dream of mine to own one of those.
@Foxonian
Жыл бұрын
I used to get those little b/w tv's back in the 90's at flea markets. They were small enough to fit in my locker at work and I could watch them during my lunch break. Of course the CRT's tended to fail on them after hard use but they were dirt cheap back then sold under a lot of names fro Unatech to Avalon.
@PSG159er
Жыл бұрын
“Presidential sampler” 😂😂😂
@mydogpeaches1
Жыл бұрын
i just have to honestly say i have been an avid viewer for some years now and i really enjoy the content especially the commentary sometimes i just can’t stop laughing because it is just so good i honestly enjoyed the presidential platter that had me struggling to breathe i also have learned from your experience in your method of testing and have applied this to my own personal ways in testing in diagnostics of electrical problems in automotive systems so i appreciate you sharing your experience on youtube anyway you asked what to resurrect and i would honestly love to see more of the ge radio that things roughly had a hard time but would really be amazing resurrected
@buddyvanspankeren8255
Жыл бұрын
My favorite to work again wouldt be that cathedral radio ...
@LyonsArcade
Жыл бұрын
The part at the end where you were talking so much game to the guy was hilarious
@tarstarkusz
Жыл бұрын
I want to see you get that projection TV working with the TV shown at 55:20 The one that you believe was initially driving the projection TV. That is by-far the coolest thing in the whole trash pile.
@waltschannel7465
Жыл бұрын
Clough Brendle Oscopes Those pieces were the most interesting to me because of their rarity, and the restoration interest.
@davepike6170
Жыл бұрын
I'd love to see that little Clough-Brengel "Oscillograph" working too!
@ricardosalesdemello4130
Жыл бұрын
Oh yeah shango, gostei,, seus vídeos são ótimos, e adorei ver os equipamentos eletrônicos & antigos abraços shango adoro seus vídeos Oh yeah! shango, I like it, your videos are great, and I loved seeing the electronic & antique equipment hugs shango I love your videos
@user-vz4bo1en8x
Жыл бұрын
Just sharing my experience with aging CRT's: got my first tv set for Xmas in 1994, it was a Broksonic CTVG5454 with a crappy Chinese tube that never had vibrant colors, it was a 21inch with a skinny neck and I used it as a daily driver till 2010 (4-5 hours on, contrast at 100% and brightness in the middle) and, before that, was used occasionally to watch my collection of VHSes. It was finally thrown in the dump in 2021 during a renovation, and the CRT wasn't holding the convergence, colors were a bit washed (specially the red gun) but it was still producing a picture. During this time it had some work done: capacitors around the STR ic, flyback and horizontal output transistor.
@user-vz4bo1en8x
Жыл бұрын
And yes, I know these old 1940s to 1960s CRT's weren't as strong as the later ones, but I figured it might get you guys an idea of how many hours these sets might have. And for the Gen Z: people would use their tvs as they use their phones today! I wouldn't be surprised if a set from 1948 would be left on 12 hours a day, everyday.
@johnnytacokleinschmidt515
Жыл бұрын
@@user-vz4bo1en8xI'm not too sure. In the early days there wasn't 24 hour a day television. Sometimes just a few hours in the evening. And people were more conservative with their time and attention.
@GinnyHazleton
Жыл бұрын
If my parents and grandparents were any example... Their TVs went on as soon as they got up in the AM, off for work, then back on as soon as they got home until bed time. I remember the big zenith blew its tuner half way into the 1994 Superbowl and it was from the mid 70s. Doing the math, its almost 50,000 hours. The pic was still good but there was no UHF and it became the new TV stand.
@jackallen6261
Жыл бұрын
For my money I'd like to see the old tube radios Frankenstiened back to life first...I really like the old Crosley TV's but yeah I know there's not much chance of that any time soon so yeah! Radios it is for me!! Love the channel
@Barbarra63297
Жыл бұрын
I'd like to see any of those tabletop radios brought back to life.
@minty_Joe
Жыл бұрын
I guess this time around we'll have one giant mass debate to watch. 😆
@andrewprettyquick2070
Жыл бұрын
RCA R5 - If you don't want to restore that, I would do the cabinet and caps on it. Thats so sweet. Like... Gothic arches and stuff. Sandpaper, turps, old speaker cloth and varnish. A dream job. Quintessential. Quaint.
@ShadowsOnTheScreen
Жыл бұрын
I think seeing one of those oscilloscopes work again would be neat.
@Vet-co9ik
Жыл бұрын
Shango066, your comments you make crack me up. Can't wait to hear more about the cone free speaker. Would also be cool to eventually see the Norelco projector in action.
@danmackintosh6325
Жыл бұрын
I don't comment often on a Shango066 video, but when I do comment there is bound to be fecal philco and urinal drippers galore...
@pcno2832
Жыл бұрын
22:56 That reminds me of an RCA record player I had when I was a kid. The wooden case had a 1947 date stamp on it, but the V-M changer had 4 speeds, suggesting the early 1950s, so that case must have sat around for 4 years waiting to be stuffed.
@user-cd8ri1mc6s
Жыл бұрын
That RCA phono you own, was 78 RPM only. When LP and 45 RPM records came into use, that phono had a 4 speed record changer installed in the 1956-1957 era to play modern records on.
@n2n8sda
Жыл бұрын
30s radio sets are my favourite! So much progress made in that decade
@jeffreyhickman3871
Жыл бұрын
That’s quite a pick of radios 📻 and TV’ a 📺. I never 👎 find such great 👍 yard sales. That projector 📽️ sounds like 👍 a GREAT 👍 school 🏫 find. Your friend, Jeff.
@GreyRockOne
Жыл бұрын
Wow, what a find!
@connorm955
Жыл бұрын
Interesting. A Sears (Sanyo) tube set. I wonder how many of those are still around. I mostly see solid state Sears TVs.
@seandoole6504
Жыл бұрын
My grandfather used to use his TV like it was a radio; If he was home, it was on. As a kid I thought it curious how he had this little sub-13" colour set just about as loud as it would go, and sit about thirty-five feet away from it at his kitchen table. I figure he was putting 2100 hours on it a year, at six hours a day.
@petemiksich5760
Жыл бұрын
The Sears set was manufactured by Sanyo, according to my archival data.
@MrCrystalcranium
Жыл бұрын
I’m working on my 50T-702 and I thought mine was dirty! Mud dauber wasp nests…that’s a new one. Never seen that inside a TV or radio.
@chrisingle5839
Жыл бұрын
I think the little oscilloscope with the green front would be fun. Curious how the waveforms would appear.
@2packs4sure
Жыл бұрын
That Crosley is a clone of the Stromberg Carlson TV12, now what the Stromberg was a clone of I don't know ,, but it's got the inductuner which I think was a Dumont or Mallory design and channel 1 which is cool..
@agostinodibella9939
Жыл бұрын
A nice collection of vintage entertainment devices.
@directcurrent5751
Жыл бұрын
I'd like to see one of the olde televisions restored. More tubes the better.
@Ronl53
Жыл бұрын
That Radioshack scanner would receive the Amateur Radio 2m and 70cm bands. You might find that interesting.
@migsvensurfing6310
Жыл бұрын
Scopes! I love the scopes !
@wx4newengland
Жыл бұрын
Ohhh I see the kitchen tv my folks had, the 5 inch portable sets. Our sets were branded “ Lenox Sound” with a date of March 1989
@wx4newengland
Жыл бұрын
One thing I remember is that the speaker sounded really good. Also did really good at pulling in fringe UHF stations
@Desert-edDave
Жыл бұрын
@Shango066 That radio appears to look like a Philco 57C based on the cabinet design.
@pcno2832
Жыл бұрын
15:26 It's kind of slick the way they combine the VHF and UHF dials. Not of much practical advantage, but impressive nonetheless.
@mileshigh1321
Жыл бұрын
Packard Bell and the 1932 Tube radio!
@kinasc1575
Жыл бұрын
What an absolutely brilliant collection of old electronic stuff, and thanks for the nudge on oscilloscope Museum, I'll have to see if they've got any info on mine.👍🏻
@radio-ged4626
Жыл бұрын
Top two quotes. "Finger that, make carcass" and "That is so horrible. I might have to buy it" 🤣 GE Radio from 30's gets my vote to do first.
@Pablo-he7gm
Жыл бұрын
Cool stuff. I really lile the look of the oscilloscopes. Related to resurrections, the most interesting one for me would be the Norelco as I've never seen a b/w projection TV in action. But that would mean to also resurrect the little set that was sitting on top of it... too much work and a lot of uncertainties also, I know.
@hugh007
Жыл бұрын
That Norelco projection thing looks related to Philco products, from the knobs to the Loctal tubes. I had a 1948 48-xxx Philco with a 10BPB that used those things.
@dougbrowning82
Жыл бұрын
Norelco was Philips brand in the USA. It was used to prevent confusion with Philco, which Philips eventually bought out. We always had Philips in Canada.
@telocho
Жыл бұрын
This is from Philips, not Philco. The projection units were known as Protelgram. Searching for that keyword in google gives lots of historic info. Protelgram uses something called Schmidt optics. The line output transformer is made for 25kV, very high in those years, and it canned and submerged in oil. It was made probably between 1949-1953.
@socalwill9876
Жыл бұрын
Re: Hours/runtime - My parents moved into the house I grew up in in 1980 with a brown plastic-bodied 19" hybrid color Zenith, we didn't replace it until 1993. In the Our-TV-Is-Always-On 80's, it did dinner-to-bed workdays and breakfast-to bed weekends; that comes out to right around 40,000 hours, or nearly 5 years if nonstop. It had only one repair during that time and worked without issue/showed no signs of deterioration for years after that. My mom smoked and we owned cats, so it would've gotten the Flavor Country achievement from the repairman as well.
@tarstarkusz
Жыл бұрын
1:00:35 The nice thing about that speaker is they are really easy to re-cone and you could even make the cone yourself.
@LyonsArcade
Жыл бұрын
So I get some dinner and I'm settling down to watch a cool Shango video I missed and here we go!!!!! - Oh good, it's one of the ones where he zooms in on bird Sh*T the whole time, LOL - Still watching
@LyonsArcade
Жыл бұрын
Checking in 20 minutes later.... he's now holding some of it in his fingers - Still watching
@alejandrodelta8928
Жыл бұрын
38:07 Oh yeah baby, that cord is ready to plug in "shango-style" 😄
@juliangerardcascio1111
Жыл бұрын
The Zenith TV 📺!!
@HavingFunRepairs
Жыл бұрын
All I will find entertaining, but the test equipment for sure has my interest.
@stevencarlson5422
Жыл бұрын
Oh for sure want to see the projector and the set going with it working, but the simple Packard bell would be fun
@HappyDiscoDeath
Жыл бұрын
14:43 that's Flavortown right there!
@gabrielleeliseo6062
Жыл бұрын
@shango066 I don't know if anyone commented on the model for the heterodyne Philco, but it's Model 54C from January 1934.
Пікірлер: 304