Don’t forget that a Barnes4WD and 7SlotCustoms offer 10% off using the code JKgear. Perfect time to install a raised Steering Stabilizer Bracket to prevent it from getting hit on the trail. amzn.to/2AjGU3h
@roccojr02
4 жыл бұрын
JK Gear and Gadgets prolly long shot if you see this but I put synergy tierods on my 17jku and roughly 10months ago. I had a shop align it now I can get under there and wiggle my bar back and forth. My steering wheel is starting to have a bounce back when I slightly turn left or right now. My cooper stt pro are starting to wear every other lug. Any feedback much appreciated.
@JKGearandGadgets
4 жыл бұрын
Jordan Carpenter it’s ok to have rotational play. Any other play is bad
@roccojr02
4 жыл бұрын
I don’t have side to side play only back towards the rearend and to the front of the jeep. Just didn’t know if that was causing my steering to wanna jerk back when I change lanes. Synergy track bar is tight. This weekend putting on dual steering stabilizer see if that would help. Watch all your videos man love them! Thank you for reply!
@paulbyars542
Жыл бұрын
And now it's not the same price at all..
@subiefreaksti_1561
6 жыл бұрын
Go team rugged
@subiefreaksti_1561
6 жыл бұрын
Go team rugged
@WATCHTHISSHITCARCLUB
6 жыл бұрын
Go team rugged
@georgespine6865
6 жыл бұрын
Go team rugged
@Se7vinDeadlySins
6 жыл бұрын
Go team Rugged
@nosdujshsdl
6 жыл бұрын
Go team rugged
@Wap4life
6 жыл бұрын
Go team rugged
@taylorwallace4226
6 жыл бұрын
Go team rugged
@chrisdyar4270
6 жыл бұрын
Go team rugged
@cleveland53015
6 жыл бұрын
Go team rugged
@kingpin386
6 жыл бұрын
Go team rugged
@acoustix6
6 жыл бұрын
Go Team Rugged
@DavidHarris-sm4ef
6 жыл бұрын
Go team rugged
@scottpayne2091
6 жыл бұрын
Go team rugged
@leegreen7524
6 жыл бұрын
Go team rugged
@nicl1779
6 жыл бұрын
Go team rugged
@nathansalera3398
6 жыл бұрын
Go team rugged
@larsculler5288
6 жыл бұрын
Go team rugged
@dt5131
6 жыл бұрын
Go team rugged
@javiermarante5344
6 жыл бұрын
go team rugged
@RyanN9419
6 жыл бұрын
Go team rugged.
@gregoryhowell
6 жыл бұрын
Go team rugged.
@petermercer5968
Жыл бұрын
Not in Australia, you're looking at 500+
@Furious_George
3 жыл бұрын
$295 in 2021. Thanks Biden 🤡
@4LowConcepts
6 жыл бұрын
Go team rugged
@JayyKilz
8 ай бұрын
Still running a 1 ton? Has it held up or should you have went with a 2 ton?
@duoglide69
5 жыл бұрын
$295. before tax and shipping 👎🏻
@JKGearandGadgets
5 жыл бұрын
Price increased due to new metal prices. Still a good price! And free shipping
@AZOTH99eod
Жыл бұрын
Why not flip the tierod?
@JKGearandGadgets
Жыл бұрын
Can’t with the oem knuckles. Drag link casting is in the way
@joebishop7909
6 жыл бұрын
GO TEAM RUGGED
@colehanlon8617
6 жыл бұрын
GO TEAM RUGGED!
@shawnhudson7570
6 жыл бұрын
Go team rugged
@reuben649
6 жыл бұрын
Go Team Rugged
@f143744
3 жыл бұрын
$199, now it’s a set at $499…
@JKGearandGadgets
3 жыл бұрын
Metal prices have increased
@mesomorfo
3 жыл бұрын
Its $300 now!
@JKGearandGadgets
3 жыл бұрын
Still worth it! Metal prices have skyrocketed over the years
@mesomorfo
3 жыл бұрын
@@JKGearandGadgets Agreed!
@leo-fs7zu
3 жыл бұрын
Where can I buy tie rod ? I don’t see the link . Thank you
@JKGearandGadgets
3 жыл бұрын
Barnes4wd
@JeepJeep234
6 жыл бұрын
It depends on the steel. My Teraflex HD tie rod refuses to bend.
@n2malinois
4 жыл бұрын
Were you happy with your TF steering parts? I can't stand mine.
@kylewesner24
6 жыл бұрын
Go Team Rugged!!!
@matthewcoleman9920
6 жыл бұрын
Go team rugged
@rb30athorn
6 жыл бұрын
Sooo the reason I want one of these is the flex!!???
@JKGearandGadgets
6 жыл бұрын
Steel tie rods are a good upgrade, but when you do hit something hard or land on a rock it will eventually bend. The good thing about aluminum is that it will bend just like a steel one, but it will bend right back to normal. I’ve had to bend my steel tie rod back with my winch way too many times. If you were to buy an upgraded tie rod then aluminum is the way to go.
@DonnieTipton
5 жыл бұрын
You should rename this video. They just jacked up the price to $300.
@JKGearandGadgets
5 жыл бұрын
I just talked to them about it, they raised it to 295 and are now offering free shipping. Price of metal has raised. Honestly by the time you get free shipping the price only increase by a small amount
@JKGearandGadgets
5 жыл бұрын
But yeah video name is changed now 🤘
@bryantrent924
5 жыл бұрын
Saw that u were waiting for over the knuckle drag link kit. Is this what u were meaning? Found this one on Amazon Doetsch Off-Road 07-18 Jeep JK/JKU 7075 Aluminum 1 TON Tie Rod and Drag Link Steering Flip Kit with 1-Ton Offset Ends Clamp included www.amazon.com/dp/B07HCTLGL3/ref=cm_sw_r_cp_apa_i_LuLyCbK1P644Y
@JKGearandGadgets
5 жыл бұрын
Yes. Very similar, Barnes is now making an over the knuckle kit. However I’m in the process of swapping to bigger axles now so no need for me to upgrade
@bryantrent924
5 жыл бұрын
Yes I have been watching! 🤤🤤
@jedwheeler2728
8 ай бұрын
You a chapel Hill fan?? haha I saw the UNC sleeve lol
@JKGearandGadgets
8 ай бұрын
Haha yeah my sister went there
@jedwheeler2728
8 ай бұрын
@@JKGearandGadgets 🤟🤟
@thomasbailey4814
5 жыл бұрын
Did Barnes 4wd ever get back to you about needing washers before the castle nut
@JKGearandGadgets
5 жыл бұрын
Most people don’t need them, must have just been my knuckles 🤷♂️
@thomasbailey4814
5 жыл бұрын
Mine did the same. After torquing down to 40 foot pounds the hole was past the castle nut. I guess I'll be stacking washers like you did.
@JoseOrtiz_1416
5 жыл бұрын
Doetsch offroad makes an aluminum tie rod and flip drag link that's also aluminum for 400 bucks !! If you get either or there only 200 bucks and there 1 tons as well with I believe lifetime warranty
@zerolimitsoffroad6346
3 жыл бұрын
I'm about to install the barnes tie rod and drag link set up in my 08 jk. It says there's no drilling or reaming unless you're flipping. Is this true?
@JKGearandGadgets
3 жыл бұрын
Yep
@zerolimitsoffroad6346
3 жыл бұрын
@@JKGearandGadgets...just watched the test of the new tie rod... Holy sh*t. Amazing!
@willrezny2838
6 жыл бұрын
Go team rugged
@VBS702
6 жыл бұрын
Go team rugged
@donj0216
6 жыл бұрын
Go team rugged
@123tank7890
6 жыл бұрын
Go team rugged
@shelbyparr1897
6 жыл бұрын
Go team rugged
@Kdiya52
6 жыл бұрын
Go team rugged
@chaseprovencio2571
6 жыл бұрын
Go team rugged
@snow13385
6 жыл бұрын
Go team rugged
@philwall666
6 жыл бұрын
Go team Rugged
@jeepwrangler3857
6 жыл бұрын
Go team rugged
@prestondickson5625
6 жыл бұрын
Not gonna lie. I’m just glad to see I’m not the only guy that wrenches on their jeep while wearing crocs.
@JKGearandGadgets
6 жыл бұрын
Haha I love them
@garrichelle
5 жыл бұрын
Thanks for this video. I need to replace my tie rod and was just going to go back stock. But for a few more dollars I can get the Barns. I know it will be over kill with me just running 33’s, but I guess it can’t hurt. Please keep the videos coming.
@garrichelle
6 жыл бұрын
Go team Rugged.
@shawnrahm1082
6 жыл бұрын
Go team rugged.
@jasoncampbell9024
6 жыл бұрын
Go Team Rugged
@Casey250
6 жыл бұрын
That is some solid bang for your buck. Do the ends flop much? I have a synergy and it has soo much movement that it cuts out my hydro for a second when I change direction while is flops. Also teh boots on the Synergy come off constantly.
@JKGearandGadgets
6 жыл бұрын
So far I haven’t noticed much flop (but it’s been one day lol) I know synergy has a ton of flop and the bends in the tie rod make it worse since it sticks out so far.
@Casey250
6 жыл бұрын
Nice! See how it goes. New tie rod has been on my to do list for a while. I Just hate spending money on parts to replace parts i've already bought once lol.
@JKGearandGadgets
6 жыл бұрын
Haha same. At least you could sell your tie rod.
@saleen12
6 жыл бұрын
Great stuff! Are you going to make Hella videos in Uwharrie?
@JKGearandGadgets
6 жыл бұрын
Plan on it!
@saleen12
6 жыл бұрын
JK Gear and Gadgets hell ya can't wait
@MrGoatman2000
6 жыл бұрын
GO TEAM RUGGED
@laryplessinger5581
6 жыл бұрын
go, team rugged
@offroadnchill
6 жыл бұрын
great video,, that tie rod looks super beefy,, do you think its stronger than a chromoly tie rod?
@JKGearandGadgets
6 жыл бұрын
It depends, chromoly is reallllly hard to bend, but if you do then it’s bend for good. The good thing about aluminum is that it will bend if you hit it but bend straight back
@offroadnchill
6 жыл бұрын
JK Gear and Gadgets yeah and the aluminum will not be as heavy as the Chromoly
@steven_alonzo
6 жыл бұрын
Giveaway!!!!!
@jackr8128
6 жыл бұрын
GO TEAM RUGGED
@JoseDeJesusVTHokieJD
3 жыл бұрын
Great video and I love your channel and product influence. I just bought one for my 2007 JK Sahara. Question....If the endpoints fit, do I still need to drill out the C?
@JKGearandGadgets
3 жыл бұрын
You should not have to drill out for the tie rod.
@rbell120658
6 жыл бұрын
Rugged ..!! I gotta get one ..!!
@richleon1955
6 жыл бұрын
Go team rugged!
@MSTrishRN
6 жыл бұрын
Go Team Rugged!
@MrWricks01
6 жыл бұрын
Go Team Rugged!
@derekhartman6600
6 жыл бұрын
GO TEAM RUGGED!
@tylermiller3367
3 жыл бұрын
This tie rod is 1.5 inches. Can I run the teraflex falcon nexus 2.2 stabilizer which has a mount for 1 3/8 inch and 1 5/8 inch?
@MARC11B
6 жыл бұрын
Go Team Rugged!
@gavakie
6 жыл бұрын
By chance know where to get one? Site says they are gone.
@JKGearandGadgets
6 жыл бұрын
Just talked to them, they are out of the tie rod ends, will have the tie rods back for sale next week so keep an eye out!
@nickaudas
6 жыл бұрын
Ive been waiting as well! They just became available again & they got my money..
@markfriskel3044
6 жыл бұрын
Go team rugged
@MCLIFE786
3 жыл бұрын
I gotta question? So the nut on my steering wheel box was lose AF why do u think that happened?
@billhulkins5213
6 жыл бұрын
When will the drag link flip be available?
@JKGearandGadgets
6 жыл бұрын
Barnes said it should be fairly soon!
@jonathanmarquez5366
6 жыл бұрын
Go team rugit
@john78188
3 жыл бұрын
Wat it does really for the Jeep ? Does it make it a smooth ride ? Eliminate death rubble
@88HillTop
2 жыл бұрын
Hey Ben, did you sell that bumper?
@jaberry77
6 жыл бұрын
It looks good. I’m glad we won’t be having to bend yours back anymore.
@JKGearandGadgets
6 жыл бұрын
Haha foreal
@GULIVERSOFFROAD
Жыл бұрын
just purchased the front no drill kit great price also great videos
@iflytango
4 жыл бұрын
Can you order custom length for your zj wj knuckle swap
@黄凯文-b9u
6 жыл бұрын
Stay safe
@BNBoogie
6 жыл бұрын
Good install video. Looks simple enough.
@edc4lyfe445
6 жыл бұрын
Go team rugged OIIIIIIIO
@Kevin-dm4ul
6 жыл бұрын
I got to get one of those. BEEF!
@devinscott5988
6 жыл бұрын
Go TEAM RUGGED!!!!!!!!!!!!!
@EdBlack-
3 жыл бұрын
What sway bar links are you running?
@tommywainst7171
6 жыл бұрын
Wow. That price is rediculous. Great vid
@JKGearandGadgets
6 жыл бұрын
It’s an amazing price!
@kawarthajeepguy5059
6 жыл бұрын
Go team rugged .
@taylorcampbell985
3 жыл бұрын
How much does the aluminum tie rod weigh?
@miken9484
6 жыл бұрын
GoTeamRugged
@austincableguy
4 жыл бұрын
Just used the JKgear discount code and got the entire Barnes4WD aluminum 1 ton kit. Can't wait!
Пікірлер: 250