Thanks DW ,you did a great job with that tune . I almost gave up on my 1100Z in .22 till I saw this video.
@stevengoodman3498
7 ай бұрын
Wow, what a difference the new 3 inch longer barrel makes! It's finally shooting like it should have to begin with. I used the JTS Dead Center 22 pellets in 16.08 grain and at 25 yards i shot a dime size group at my small 25 yard backyard range. I couldn't be happier man! I knew something had to be wrong with it and it was definitely the barrel. Happy New Year DW!
@Beanflip
7 ай бұрын
Great! Congratulations on that discovery and thanks! I’ll be trying it with mine as well.
@blomkransen
7 ай бұрын
Hello sir and thank you for the video! If you listen to the sound when the shot goes of you hear almost like a burping sound, that is called hammerbounce, Google that and you can get better info about it than I can give, but whats happening is that when you pull the trigger the hammerspring push the hammer at the striking valve and the pellet get a push of air and flyes away and the hammer is send back, now with your gun the hammer flies back into the hammerspring again and bounce back into the striking valve and sends more air into the barrel, the pellet might have left the barrel or just gonna, so this can cause inacurasy, but it also waist a lot of air cause it doesn't stop there, cause the hammer flies back again and the hole thing repeat itself many times, meaning you send away air from the cylinder or bottle out into the empty barrel... this is caused by a to long hammerspring, some makers just push in the longest they can cause high velocity numbers sells better... If you can find hammersprings to your modell at the shop you bought it or if any other gunstore have those buy some and experiment with cutting of a coil, shoot and listen to the sound of it,if it still burp take another coil of and continue until you hear the gun breathe properly, if you can’t find a spring to exactly your modell they sell others that can fit, meassure the lenght, diameter ant thickness of a coil and ask if they have any similar, or go to the hardware store they have sample packs with springs and you can see if it contain any similar in diameter and thickness and cut it down to fit your gun and then do the test all over again, you could cut the one in your gun also but then you haven't got one original any more... so try to find another one first before doing anything!If you get this right you probably can double the shotcount, get even better accurasy and a more enjoyable airgun! Sorry for the long rant but I could not explain any shorter hehe, god luck!
@stevengoodman3498
7 ай бұрын
Hi DW! Barra also sent me a replacement barrel with the air stripper for mine. It is 3 inches longer than the one that came with it. I got it installed last night and weather permitting do some shooting Sunday to get it sighted in. I'll let you know how it's grouping as i am excited to get it working as good as your's. Happy New Years to you and your family!🎉😊
@chris.0909v
6 ай бұрын
Have you gotten a chance to use it yet? If so, how was it? My 1100z has also been grouping poorly, and I'm wondering if this would fix that. Thanks.
@stevengoodman3498
6 ай бұрын
@@chris.0909v See the next post down telling how well it shoots. She's a winner now and groups well. It should of shot excellent in the first place, right? The new barrel is 3 inches longer than the one it came with. I shot some 22 caliber Hades pellets this weekend and they grouped well too. It solved my accuracy issues and It could solve your issues as well. With freight I believe it was about $38.00 total from Barra in Arkansas. Best of luck my airgun friend!
@chris.0909v
6 ай бұрын
@stevengoodman3498 Great, I'm glad its working well for you. I've since contacted barra, and they're sending me a new air stripper for free, but no mention of a barrel. I may just try the new air stripper and see if that fixes it, but if not, I'll probably have to buy a barrel. Do you happen to remember what length each of the barrels is? Because I'm curious if mine potentially has the long one already just with a bad air stripper, or if I have the short barrel. Mine measured around 19.5 inches.
@stevengoodman3498
6 ай бұрын
@@chris.0909v the new barrel is 23 inches and they ship it to you in a plastic hard tube with caps on both ends for protection. Then they put brown paper around it and shipped it in a nice cardboard box. Very well packaged!
@chris.0909v
6 ай бұрын
@stevengoodman3498 Nice, I think I'll probably end up getting one because I guess mine came with the short barrel. Thanks for letting me know 👍. Hopefully, it'll give me some better accuracy than I'm getting now.
@stevengoodman3498
7 ай бұрын
Great video man. My 1100Z is not grouping at all so i called Barra and they are sending me a new air stripper to try first. They told me some of these came out with too small of a hole in the stripper causing clipping. I hope it fixes my issues and i start getting groups like you are. Merry Christmas! 😊
@eddiecahall3824
7 ай бұрын
The riflelz shoot slugz better than it will pellets. Try 17 gr or 18 slug and turn it back up like one full turn in. I think you'll be amazed! Nice testing here tho. And you'll need a Chrony👍🤙🤙🤙
@supergreatairgunreviews
4 ай бұрын
I've been thinking about ordering some 17.5 nsa slugs what fill psi, all the way to 3000psi or less
@SaltyKayak
Ай бұрын
Maybe I missed it but where is the hammer spring screw when you BEGIN to make adjustments? All the way out so that the screw is flush with the back? And then you begin turning the screw IN. Or, do you start with the screw all the way in and begin to back it out?
@dwHarris02339
Ай бұрын
Yes start all the way out so you don't see any threads. I turn mine in 6 full turns.
@jaredlee5963
2 ай бұрын
Did I miss what settings and adjustments were made other than a longer barrel?
@dwHarris02339
2 ай бұрын
2500 psi fill and 6 turns in on the hammer spring.
Пікірлер: 17