Super clear, straight to the point and of course extremely useful. Thank you so much! The best video I found about this topic.
@angelahannan6594
7 жыл бұрын
Thank you!! Wanted to return these 2 chairs to Amazon but could not get them apart - until we found you! That was easy...but, of course, it is easy when you know how - and impossible when you don't. Thanks again.
@timtheobalds7286
8 жыл бұрын
Thanks so much, possibly the most useful 3 minute video I have ever seen!
@tcrog6068
2 жыл бұрын
Soooo grateful for your video! Everything you instructed worked perfectly!! I have three stools to take apart to send back to Wayfair... I never ever would have figured out how to disassemble them on my own! Thank you!!
@rosebumphus1881
4 ай бұрын
If you still need them look at my mistake.
@allendicenzo4654
Жыл бұрын
life saver. the tapping with the screwdriver did the trick for me .. Thanks!
@rosebumphus1881
4 ай бұрын
Yes, that's how I corrected my error😂
@jenevievevegandc
8 жыл бұрын
Life saver video thank you! Could not find any info provider by seller to take it apart and be able to return in original box. Awesome!
@kempossibleprivateinvestig9998
5 жыл бұрын
You are master of clear and concise! Thank you!
@rrp1985
3 жыл бұрын
Awesome, helped me disassemble 4 bar stools in 15 minutes. Thank you very much, a great video
@andreafacchetti5860
3 жыл бұрын
I have only one regret.. not having watched this before try to fix my bar stool.. I have done exactly the mistake at the end of the video.. by the way really a useful video ty
@ericajamieson2811
4 жыл бұрын
Thank you sir. Easy to follow and wonderfully executed you deserve an Oscar ;-)
@justsnuggle
4 жыл бұрын
Thank you so much, the instructions were vague. This video saved the day.
@rosebumphus1881
4 ай бұрын
Lord, I didn't remove the cap and I thought I messed it all up, but I went back and removed the cap stuck inside the upper part of the stand knocked it out with a screwdriver and reassembled it. Works perfectly ❤
@KTS-rp1og
4 жыл бұрын
THANK YOU so much for this video!!! I was beginning to think it was a trick or something because it felt like it took forever for the circular foot pad of the bar stool to separate. I used WD-40 and let it soak for about 10 minutes and still it took almost a full minute of banging for the separation to finally occur. The other part separated much faster. One recommendation I have for you and others is to make sure the hydraulic tube is fully compressed before taking off the circular foot pad because if it's fully extended, it's really tough to compress when it's exposed. Anyway, thanks for your guidance!
@bernardomelendez8253
6 жыл бұрын
Thank you, very nice explanation. In my case it was very difficult to leave the hydraulic system, so I had to hit a couple of times in a position and then turn the base and hit again, and so on, until it came out as in the video
@sethurk
6 жыл бұрын
Ohh man! You saved my time. The sellers never would like to provide disassembly instructions. May be they dont want us to return in case we dont like the stool?
@evasive5017
3 жыл бұрын
Thank you! So helpful and concise!
@Mortili9
3 жыл бұрын
Thank you so much, your video is extremely helpful!
@tracyosborne954
6 жыл бұрын
Thanks so much for showing how to the extract the gas cyclinder itself.
@angelacruz162
6 жыл бұрын
Thank you. The block of wood did the trick. I tried using a rubber mallet but I couldn't get the cylinder out! Now I just need to figure out how to compress the hydraulic cylinder since it expanded to full height while I was hammering.
@downhlracr
2 жыл бұрын
Thanks, you just saved me $100 for a return I couldn't get apart.
@petbax53
8 жыл бұрын
A great help, good clear video. Thank you
@RebekahGarrison
2 жыл бұрын
Oh thank you so much for sharing this!
@peggysexton8002
10 жыл бұрын
I have tried using the hammer and block of wood, and also rubber mallet, but cannot get it to budge. Any advice? I'm still at the base hydraulic system.
@tudor5150
10 жыл бұрын
Worked like a charm. Although I did the top half first and used a rubber mallet.
@BLatinoDance
5 жыл бұрын
Thank you! You make life easy
@themoonandtenpence4900
Жыл бұрын
Very helpful, thank you 👍
@philipgoutman2243
6 жыл бұрын
Great video. It worked like a charm.
@patriciadavis198
9 жыл бұрын
Thanks! I had to hammer both places repeatedly - like 20-30 times - but the pieces finally separated.
@phoeltzenbein
3 жыл бұрын
Thank, clear and to the point. Where can I get a new cylinder? Where do I find the information about the size?
@richardbolduc9079
3 жыл бұрын
The first one came off easily, as shown. The second one, I ended up needing to match a medium depth socket from my tool set to the diameter of the metal ring. That allows you to hammer the top of the socket and pop the pneumatic/hydraulic cylinder out without touching the plastic center piece. It also allows you to avoid notching the metal ring with a screwdriver as you pound at it, lol!
@SuvasPatel
6 жыл бұрын
Thanks! dismantled so simply!
@KayDlugonski
6 жыл бұрын
Thank you for making this video!!!!!
@michaelannrowe
8 жыл бұрын
Can you provide a link to re-assemble. My Stool seems to be staying in the furthest position up. I'll take apart and re-assemble. Thanks.
@julieludeman448
5 жыл бұрын
thanks for the video...it worked wonders
@alzhenfashionyallahgotrave7172
3 жыл бұрын
Hi what should i do i hit that black clip so means my bar stool damage I can't put that back? Any suggestions.ty
@christran419
3 жыл бұрын
Thank you for the video. Wonder if anyone knows the p/n to the seat only not the entire stool so I can replace mine as it been ripped. I like this stool. Thanks
@anthonydegiulio9534
10 жыл бұрын
Worked great! Thanks
@lincyabraham198
6 жыл бұрын
Thank you, I was breaking my back to pull it out.
@regio5001
Жыл бұрын
THANK YOU so much
@luissan515
5 жыл бұрын
2:14 *when the hammer misses the screw driver but hits your thumb.*
@christinemarcella5627
6 жыл бұрын
Thank you Thank you Thank you! This is the best!
@pollard068
7 жыл бұрын
Thankyou Scott hall!
@swagon4545
6 жыл бұрын
you make it look so easy, am trying to transfer one bottom onto one stool to another but will not work, ive tried wd40 spray. to be honest it got that bad i smashed them up and put them outside for the scrap man
@karenmack4798
8 жыл бұрын
How do I unlock an extended cylinder after disassembly. It is stuck in the open position. Help
@AndreaMoraxandryx
4 жыл бұрын
Gracias!
@pprelo76
2 жыл бұрын
Thanks!
@Joyperez-c9b
8 ай бұрын
sir good afternoon Po.what sizes your gas cylinder
@debraedwards8878
7 жыл бұрын
how can I get the black cap off it won't budge
@darrellhoff
4 жыл бұрын
Mine is stuck in the up position. How do I fix
@rickthestick8
8 жыл бұрын
Thank you!
@st3ady
8 жыл бұрын
thanks again!!!
@vijaymohan5764
Жыл бұрын
Thanks bro💕
@ivanrolandoquinayasomen5986
6 ай бұрын
Pero no hiciste la reparación...
@AAYZFN
8 жыл бұрын
I can't seem to disassemble.
@truckerjay4754
6 жыл бұрын
Hi was wonder I know this video is old but I have the Zuri Lush bar stools square and I can't get the gas lift out I was wondering if you can make a video on that bar stool. thanks
@liquos
6 жыл бұрын
I've been waiting on this thing with a hammer so hard I'm afraid it's no longer gonna be reassembleable when I finally get them apart.
@yassin2471
8 жыл бұрын
WORKED FLAWLESSLY
@Hornsberry
2 жыл бұрын
Thank you!! We didn’t have to watch a ton of nonsense!!
Пікірлер: 61