Juat watched every episode in 2 days thats some work there, i wish i could get my welds that tidy lol
@MarkEdwards
10 ай бұрын
Thanks for taking the time😁 As for welds, there all ground off anyway😂
@hoggmotorsport
11 ай бұрын
Great work mate 👌 that spray sealer doesn't go far, I used a full box on mine! Always motivational to see new bits going on 👍
@MarkEdwards
11 ай бұрын
Thanks, 5 tubes gone in seconds 😁
@justinwhalley9679
10 ай бұрын
love watching the progress on your car,its going to look really great when its done,i even brought a diecast yellow rs2000 lol,rather have the real thing mind,great content and looking forward to the next one
@MarkEdwards
10 ай бұрын
Thanks Justin 😁
@hothi13singh
10 ай бұрын
Well done mark.
@MarkEdwards
10 ай бұрын
Thanks😁
@davidyates748
11 ай бұрын
Nice work Mark, it's funny how much effort is put in to replicating the shoddy work they did at the factory!
@MarkEdwards
11 ай бұрын
I find “that’ll do” comes naturally 😁
@wesleypegden1685
11 ай бұрын
Fantastic effort 👍 It’s looking great
@MarkEdwards
11 ай бұрын
Thanks Wesley 😁
@aledhopwood
11 ай бұрын
Cracking works Merps 👍😎........very educational to thickos like me 😆
@MarkEdwards
11 ай бұрын
Thanks Al, don’t take this as education though, it’s probably complete rubbish 😁
@billywhizz98
11 ай бұрын
I have used some of that Poundland paint myself and I am quite surprised how good it is
@MarkEdwards
11 ай бұрын
It works well, but I must confess, I don’t even know if it’s cheap, my wife bought it for something else so I borrowed it😁
@billywhizz98
11 ай бұрын
I think it’s about £2.50p but it’s cheap enough for an undercoat you can get it in gloss or Matt black
@aledhopwood
11 ай бұрын
@@MarkEdwards Isn't it a pound then?
@MarkEdwards
11 ай бұрын
@@aledhopwood 😂
@billywhizz98
11 ай бұрын
They should be done for false description
@antmk2dreaming614
11 ай бұрын
looking good. where did you get those fuel clips and rivets from, please
@MarkEdwards
11 ай бұрын
Thanks, eBay, here’s a link for the clips, the same seller had the rivets, but showing out of stock now. www.ebay.co.uk/itm/132406113198?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=mmUnAUvdTRW&sssrc=4429486&ssuid=EJNlTSzzRk6&var=&widget_ver=artemis&media=COPY
@kevinmcmuhammad4841
10 ай бұрын
Hi Mark my nephew is changing an mk2 escort round light into a rs2000, do you know of any replica kits available out there, lights grill bezels, were here in Ireland 🇮🇪 a good place for rally cars but we've had no luck so far thanks.
@MarkEdwards
10 ай бұрын
Hi Kevin, I don’t know of any sorry, you could speak to GS Escorts they’ll know if there’s any available, if not, the only option is to find original stuff and restore it 👍🏻
@leer798
11 ай бұрын
I commented but it’s disappeared 🤔 Looking good Mark :)
@MarkEdwards
11 ай бұрын
Thanks Lee😁, It was saying there was a comment before anyone else, but nothing there when I looked🤷♂️
@leer798
11 ай бұрын
@@MarkEdwardsstrange I commented like this but also asked there the rivets were from - but now I’ve seen you answer someone else anyway :)
@arthurdardalis
10 ай бұрын
Nice work, but factory finish (whatever that is) cannot be replicated. The line workers were instructed how to apply sealer, rust prevention etc but it was an entirely manual process resulting in no two cars being exactly the same. I personally would have painted then protected the underside in order to preserve it for years to come.
@MarkEdwards
10 ай бұрын
Thanks Arthur, It’s just as close as I can get it to how it was, minus the rust😁 It won’t see salt, and will be kept in a heated garage when it’s finished, so should last a fair while.
@leeevans4635
3 ай бұрын
Been following this just revisited 😂 Any advice on where to get a seam sealer gun from?
@MarkEdwards
3 ай бұрын
I can’t help you, cos I’ve just looked where I got mine from and the price has tripled 😱 There are probably cheaper alternatives that do exactly the same job, but I haven’t tried them🤷♂️
@leeevans4635
3 ай бұрын
@@MarkEdwards Ok cheers mate great progress on the RS it's going to be a belter👍
@MarkEdwards
3 ай бұрын
@@leeevans4635 Thanks, let’s hope you’re right 😁
@geofffletcher5739
22 күн бұрын
How many tubes of sealer did you use?
@MarkEdwards
22 күн бұрын
Hi Geoff, I used 20 tubes, 10 per side👍🏻
@geofffletcher5739
22 күн бұрын
@@MarkEdwards thanks. Getting to that point with my rs turbo resto.
@MarkEdwards
22 күн бұрын
Yeah, I’ve seen the Mk3 and 4’s have a similar finish underneath, I’m not even sure this is the right stuff, but it looked close enough for me😁
@geofffletcher5739
22 күн бұрын
@@MarkEdwards its the closest you'll get. 3m do a similar spray sealer but not in beige
@robinstewart4729
11 ай бұрын
looking good
@MarkEdwards
11 ай бұрын
Thanks👍🏻
@AndrewNeilBaird
10 ай бұрын
Emm , missing the bits with masking tape? , how many did i weld because the rust started where the goop gun was missed , don't be a ford production line shortcut man, get them coated and thats a job done proper.
@MarkEdwards
10 ай бұрын
Don’t worry, I’ll cover it all in Shultz when I’m finished😁
@AndrewNeilBaird
10 ай бұрын
@@MarkEdwards good be-bop
@roccoPuopolo-z2i
11 ай бұрын
Great job mate, what Seam sealer are you using ? Looking forward to seeing some paint on it 👍 I finished my mk1 rs2000 last year after a ten year resto 😅
@MarkEdwards
11 ай бұрын
Thankyou👍🏻 It’s Teroson 9320 Ochre, I’m not sure it’s an exact match to the original, but it’s near enough for me 😁
Пікірлер: 47