I'm building a Baron G58 full motion sim at the moment for fs2020. I really love the solution you have with a single projector and two side monitors as opposed to 3 projectors. Great setup and thank you for sharing!
@Cromagnon2010
5 жыл бұрын
Amazing set up! Im an ex commercial pilot who for various reasons spends more time flying simulation than real flying. you have inspired me to look into building my own cockpit, though the problem is I fly, used to fly such a diverse range of different types, perhaps modular plug in controls might be the answer? multi engine and aerobatic machines etc!
@larrysouthern5098
4 жыл бұрын
Now that's a nice flight sim setup!! Congratulations!! The best thing is to saddle up and FLY!! SIMMERS UNITE!!! 🐦
@kennykanada
3 жыл бұрын
Excellent! You don’t see too many sims with projection. I’ve been using projector for 9 years. I’m currently rebuilding my sim as a single seat. Gonna be almost exactly like your rig. 👌😎
@SimUKReviews
7 жыл бұрын
Still one of the most amazing cockpit designs I have seen. Friendly concern, I hope this strip lights don't get too hot?? Foam can be very badly behaved around heat (it looks like LED so prob not an issue). Please keep up your excellent videos, I have added a link to your channel on my own as I think you deserve as many views as possible :-)
@OnTheGlideslope
7 жыл бұрын
Sim UK thank you so much. Yes, they are LEDs and don't get warm, but thank you for the concern. And thank you for the link!
@Mahoot
6 жыл бұрын
-Congrats you just won $10,000! -Yippee I’m going to go spend all of it on a Cessna cockpit replica!
@mikewilson2341
7 жыл бұрын
Very nice clear, both audio and visual, presentation. Great encouragement for me to get going.
@OnTheGlideslope
7 жыл бұрын
Thanks. Definitely keep going!
@TimLitfieldakaTimWhitfield
6 жыл бұрын
That is alot of time, hard work and money you put into this! I wanted you to know your hard work is appreciated !!! Thank you for sharing. I just found your channel today and subcribed 10/07/17 ! I am amazed at what you have done !
@MeaHeaR
2 жыл бұрын
Awww the cute liddle Key-Boréd 😁😁
@emanuelecacciatore4274
6 жыл бұрын
I love your sim , very good made! It's like a real Cessna!
@mr.marcus268
6 жыл бұрын
Great job with your setup. Watching your videos ... I get the impression that there is so much more to what you have created. Thank you for sharing.
@monsenrm
4 жыл бұрын
Nice setup. I am just starting to build mine. It will be a Cessna 182 sim that mimics my own Cessna 182 as closely as possible. I will be using X-Plane and Air Manager along with the fantastic Arduino interface Air Manager has for rotary encoders and such.
@goprojoe7449
4 жыл бұрын
Good to see someone take the hobby seriously
@scottbrothersproductions9312
7 жыл бұрын
I have 4 questions for you. 1) How did you hook up all the electrical stuff for the instruments and the panel. 2) Where did you get your designs for the sim? 3) A little suggestion, but could you do a series on where you build a flight sim and split it up into different videos to show how to make a sim? 4) Where did you get all your parts and instrument gauges? If you see this comment, thanks for reading, and respond as soon as possible.
@OnTheGlideslope
7 жыл бұрын
Scott Brothers Productions please see www.ontheglideslope.net which answers most of these questions.
@scottbrothersproductions9312
7 жыл бұрын
On The Glideslope Thanks!
@surinderparkash1135
4 жыл бұрын
Wow! Just wow!
@davidwebb3134
4 жыл бұрын
You are a genius bro. Thanks for sharing your great talent and skills. You just earned my subscription bro.
@aviatorbja
7 жыл бұрын
This is very cool. Looking forward to Flying with you again on PE
@OnTheGlideslope
7 жыл бұрын
Today, 1:30! See the blog ...
@aviatorbja
7 жыл бұрын
On The Glideslope dang! No power in Plymouth Michigan due to storm
@bryanliggett9411
6 жыл бұрын
Nice job very impressive
@OnTheGlideslope
6 жыл бұрын
Thanks!
@neilrampersad4291
7 жыл бұрын
thanks for all the info, I am building my sim and will definitely use some of the information you gave here, thank you.
@OnTheGlideslope
7 жыл бұрын
Good luck!
@pizzaandproperty1246
2 жыл бұрын
this is so cool! well done mate :)
@adammontgomery1405
7 жыл бұрын
First off excellent job Very creative. If you have time and don't mind can we get a tour of the gauges? I would like to see the six pack but especially the G 1000 and the GTN 750 it would be nice to see what kind of functionality they have in the simulator.
@gregpruitt1647
5 жыл бұрын
Excellent job. Well done! Do a video of you flying.
@ButchNackley
3 жыл бұрын
Excellent.
@patrickboshell9445
7 жыл бұрын
Wonderful. Clear Concise and informative. You did a great job. Well done.
@OnTheGlideslope
7 жыл бұрын
Thanks. Hope it helps.
@SHONROPER
2 жыл бұрын
Well done!!
@zak3159
6 жыл бұрын
I’m thinking about going the VR route, hoping that it will save some coin. Saitek Combat pedals arrive in a few days.
@SW-yz4fv
7 жыл бұрын
Fantastic' I really enjoy your videos. Thank you for posting!
@OnTheGlideslope
7 жыл бұрын
Thank you.
@marcaumais8698
6 жыл бұрын
Amazing set up
@OnTheGlideslope
6 жыл бұрын
Thanks!
@totoritko
7 жыл бұрын
Very nice work!
@OnTheGlideslope
7 жыл бұрын
Thanks much.
@FlightSim2703
2 жыл бұрын
Cool job 😊👍
@manwinkler
5 жыл бұрын
You inspire (and teach) me. Many thanks.
@XPilotSimPro
7 жыл бұрын
Awesome Design / Setup. Keep it up!
@OnTheGlideslope
7 жыл бұрын
Thanks. Will do.
@TAHITIAIRLINES
7 жыл бұрын
OMG magnifique cockpit it's in your garage? bravo pour votre travail de fabrication du cockpit
@OnTheGlideslope
7 жыл бұрын
Merci beaucoup!
@byronmcduffy3485
7 жыл бұрын
Again, awesome job dude. When are you coming to my house to build this? Got money and lots of beer.
@OnTheGlideslope
7 жыл бұрын
Thanks. I'll be right over!
@bennielamb8911
4 жыл бұрын
Great video. One day I'll be sending again
@Hyestar
7 жыл бұрын
Hi...Wondering if the guide is out yet? I have completed the frame but am having a bit of trouble with the INSIDE of the enclosure as far as the corrugated plastic....just cant get things to line up right....Im a better PILOT than a builder I suppose... :)
@jamesleicher
6 жыл бұрын
Hey welcome back,i forgot what your resolution on 32 inch tvs
@bong32bong
7 жыл бұрын
Impressive!
@OnTheGlideslope
7 жыл бұрын
Thanks much.
@backintheairagain9803
2 жыл бұрын
Hi, I’m looking to upgrade the visuals in my sim and I’m impressed and intrigued with what you have done. I like the idea of putting monitors on the right and left walls rather than using a projection system that wraps around. My question is: Do you get a smooth view when you pan from the front screen to the side, or is there a change in continuity and depth perception? THX… your comments are appreciated… Joey
@flyhardt
2 жыл бұрын
Sweet.
@skyhawkn734tp
4 жыл бұрын
Great job but I will be interest in heard more about the hardware you used to run it. Thanks.
@pebeqhdproductions8079
3 жыл бұрын
How u make these edges?
@maskystudio9193
2 жыл бұрын
What brand projector u running on sim
@n9878f
4 жыл бұрын
Is I ok to have the 100” screen that goes beyond your vision range. It looks like it goes with the window tv’s very well. Once you step back and look at the sim you see how big the projection screen is. It just looks like there’s more to see but the view is cut off by the windows. Could you go with a smaller windshield screen than a 100”?
@maskystudio9193
3 жыл бұрын
Hi, Amazing setup ...side monitor spec
@warbadgerfin1510
6 жыл бұрын
i have those too
@back2basics668
10 ай бұрын
What angle cut did you use on the front window 2X2's that make up the A pillar so to speak?
@fspmaddin9743
7 жыл бұрын
Nice video . Do you have FPS losses with your projector view? I would like to make the front view with a big TV. I hope this goes. I have a NVidea with surround 4 monitors I have now.
@back2basics668
10 ай бұрын
what is the material called you used on the doors on the inside? Muslin??
@filippo__official
4 жыл бұрын
hey! good job. i have only a question: how do you connect three monitor?
@BlitzBodyBeats
4 жыл бұрын
Specific graphic cards have more than 1 hdmi slot or just buy 2 graphics cards and use some counter to make them 1
@Hyestar
Жыл бұрын
Hello from the year 2023 (it suck here BTW....) Still using your sim?
@LetsFly-vx7wh
Жыл бұрын
You still around? Havent seen or heard from you in some time???
@harryf5231
5 жыл бұрын
Nice
@megatech1966
5 жыл бұрын
Brilliant job. Subscribed👍
@welloglock40
4 жыл бұрын
hi how did you get to activate your cesna switch panel? I got one and its not plug and play.
@FlightSim2703
7 жыл бұрын
Awesome job, like it very much, thumbs up
@OnTheGlideslope
7 жыл бұрын
Thanks!
@kashbagal5724
7 жыл бұрын
Hello. I love your setup and am looking to make one almost exactly based on your setup. However, I have a couple of questions: 1. If you were to do it all over again, would you recommend creating a panel with two tablets instead of one tablet and FIPs to give more flexibility or the current setup is better? 2. Instead of a projector, I would like to use a large 4K Curved TV screen in front. With the distance that you have in front and to ensure you don't have a gap on the left or right what would be the right size TV? Love your videos and thanks for putting all of this information on your website.
@dfdg886
5 жыл бұрын
Hi, I'm looking at your GPS (4:33), it carries an original frame, I have a JPEG that substitutes this one and it's just the image ... if I want to, I'll also have a cockpit of the c172
@bradymueller7883
4 жыл бұрын
Are you able to give a little bit more detail on how you did the side TV's.
@OnTheGlideslope
4 жыл бұрын
Go here: www.ontheglideslope.net/
@jimharris1029
7 жыл бұрын
i think you sim one of the best ive seen nice cockpit lighting colours and good designwhat projector is that its so close to the screen ??
@OnTheGlideslope
7 жыл бұрын
Thank you. It's an Optoma EH320UST ultra-short throw projector
@elvis_aaron_presley1977
4 жыл бұрын
I really enjoy all you’re videos thanks for all the ideas on how to build one, quick question how tall it is on the inside?
@DTA34613
7 жыл бұрын
How did you connect all those USB Based panels to X-Plane if it supports only 10 devices?
@junaid5348
4 жыл бұрын
hi how do u connect the ipad with sim?
@cessnavirtualpilot
7 жыл бұрын
Good afternoon. Ver y good vídeo. To keep the documentation in the doors, as you Have done it? Or that material ever made? Thank you
@OnTheGlideslope
7 жыл бұрын
They are actually little business-class packets that were given to me on an American Airlines international flight. Open they work fine as pockets, and I just drilled them into the side of the cabin.
@junaid5348
4 жыл бұрын
Excellent job mate. Im gonna build a piper warrior cockpit soon for my 10 year old son so he can practice until hes 14 when he takes his first lesson. Did you use a single pc? Is it smooth?
@SuperPilot37
6 жыл бұрын
hi, very nice, please help me, i have xplane 11 and saitek fip and a iwant the wet compass as you have, i already have the fsx times gauge of the wet compass but i don´t know how it works and what program do i need, please help me and excuses for my bad english, what do i need to install it? Thank you.
@aureliomarsili3902
7 жыл бұрын
The magic ... revealed !!! Great !!!
@OnTheGlideslope
7 жыл бұрын
The Wizard is sitting behind the screen ...
@tumeropadre2
5 жыл бұрын
SO COOL! your so lucky.
@ComesTheRooster
7 жыл бұрын
OTG - In the tour you called your side monitor a "tv"... are they literally tv's or monitors? The reason I ask is that I'm concerned about them being so close, and wonder if the difference would matter. Thanks for all the info. Really enjoy your videos and website. With the release of the 1080ti, I'm jumping in.
@OnTheGlideslope
7 жыл бұрын
Go for it! They are really TVs. LED HD ones I got at the local Best Buy. Cheapest 1080p ones I could find that had a flat base. They were like $139 each.
@ComesTheRooster
7 жыл бұрын
Awesome, thanks!
@dfkendrick
6 жыл бұрын
DUDE! So cool. Very nice job.
@MrRCflying
6 жыл бұрын
I am wanting to do a cockpit similar to this to use with the G-seat I built. I was going to make the seat 2dof for VR, but am really thinking I want a real cockpit. Where can I find the dimensions of this one? Specifically width, and window size. What size monitors for the windows did you use?
@daschmoboy
6 жыл бұрын
Flight Illusions states that their audio panel is not fully compatible with X-Plane. Have you seen any issues. I'd like to get it as it closely resembles my real life audio panel, but I'd need it to work in X-Plane. Thanks!!
@1973canim
7 жыл бұрын
hello my friend. i really love your channel. i am also a licenced single engine pilot, but since i moved to Europe , i sadly didn't fly anymore. Lived in New Jersey and went to Gibson air academy and flown cessnas and pipers. i want to start building my own home personal SIM and would like to know, to work with xplane what is the minnimum specs needed regarding computer hardware. not something top of the line....but just what is enough. thanks a lot
@michaelwhite3665
7 жыл бұрын
Can you put out a part by part Id list I had a hard time understanding your description of the wet compass other wise I liked the tour
@OnTheGlideslope
7 жыл бұрын
Please see www.ontheglideslope.net
@tarekeltambouly5046
5 жыл бұрын
Please: How do I use two screens - one for viewing views (airports, mountains, ground, etc. etc) and other cookpit devices
@simoncourtney1592
2 жыл бұрын
Which projector do you use
@moogabib1
6 жыл бұрын
Great video. What's your view on force feedback yokes? Did you ever consider one before buying the Yoko?
@haykodjan
6 жыл бұрын
You need to add to this a Brunner yoke
@Hyestar
7 жыл бұрын
do you think a 65 inch curved tv would work ok for the front windshield....The wife is not thrilled with me getting a projector and screen just for the sim.....:(
@OnTheGlideslope
7 жыл бұрын
I say get the sim you can have not the one you wish you could have. You'll have a very good view with 65 inches, especially if it's close to the screen. My viewing angles for an unobstructed view from both chairs is probably 75 inches, but I say err on the side of having a sim AND a happy wife ...
@pilothound1582
7 жыл бұрын
Hey there, On The Glideslope... I've got a similar build I've been working on but only have the front projector at the moment no side panels, my question is do you find the projector is able to provide a good quality image or similar to the 1080p screens you have? Thanks for all the awesome vids dude much appreciated and I will be posting mine also in the near future 🤘
@Sheza58
6 жыл бұрын
I tried to build a cockpit using your specs which worked great but i fell short with a projector i nought. What's your thoughts on a 55 inch tv for the front instead? It'll have to be flat unless x-plane can 'tilt' the forward view.
@trikslife1137
6 жыл бұрын
Does the sim have a parking brake?
@tinatina8039
5 жыл бұрын
How much both costs
@gennaromenafra4335
6 жыл бұрын
What Other planes can you fly with this cabin?
@wagnerfligth
7 жыл бұрын
Good morning, how can you project the image so close?
@nukedaddy
5 жыл бұрын
You're my hero.
@FountainSongs
7 жыл бұрын
Love it!!! ... Great Sim!
@OnTheGlideslope
7 жыл бұрын
Thanks much.
@gianlucaluisi8695
7 жыл бұрын
Hello! Could please explain the gauges you bought from Fsxtimes for the x-plane 11 default c172? (there are too many options). Thanks a a lot
@ifdude8020
6 жыл бұрын
Hi nice setup! Just wonder what you used for the white bit around the monitors and also what the backboard for all of the instruments is made out of. Thanks!
@OnTheGlideslope
5 жыл бұрын
Hi. Panel is made out of 1/4 inch MDF. The trim around the windows is automotive trim.
@Hyestar
7 жыл бұрын
Do you have a parking brake?
@Bfrosa2k
7 жыл бұрын
Hey captain ! How do you set up your views for the wings ? What's your settings for the view ? Do you have to calibrate you view settings everytime you fly? Thanks I really love your simulator captain ! Great job
@OnTheGlideslope
7 жыл бұрын
Hi Bruno. Go to the "How To" section of the website and there's a lot about those questions there. www.ontheglideslope.net.
@Mywheel
6 жыл бұрын
Well done!!! 👍
@flysurfer2501
4 жыл бұрын
Thank you for your amazing work and sharing all of this! May I ask you, how do you manage 3 displays on for the outside view plus additional displays for your cockpit. Do you have a tipp how to run 5 displays with one PC? Maybe I overviewed it, but I would be very thankful for a tipp how to run the three outside screens plus a G1000 which is using 2 displays, too. Thanks for all your work, you are the blast!!! I can't login on Wordpress to contact you, Wordpress doesn't allow new registrations at the moment..., that's why I am writing here. Thanks a million!
@OnTheGlideslope
4 жыл бұрын
Four are plugged into the 1080ti card, and one (the GNS430 GPS) is plugged into the motherboard's onboard video card. In my bios I activated both cards.
@DanielLooper
6 жыл бұрын
I am looking for a new video card to run my three monitors I am currently running and old. gtx650TI I saw that you were using NVIDIA GeForce GTX 980 TI is there a new replacement that will easily handle the two window monitors and the projection screen. 100 ", I apprciate any advise , thanks.
@OnTheGlideslope
5 жыл бұрын
The 980ti was a great card. But I am really loving my new 1080ti.
@gianlucaluisi8695
7 жыл бұрын
I build one like yours using the schematic on your website, many thanks for the helps! i founded out thatthe rudder pedal are a bit to close to me and i was thinking about to add a small room for the legs to push forward the rudder, what do you think?
@OnTheGlideslope
7 жыл бұрын
That may be a good idea, especially if you have bucket seats. I find I sit quite a bit upright (more like a Cessna).
@Flamboyant8
7 жыл бұрын
Beautiful setup man. One day I'd like to build something like this. Does this setup work with any planes other than a C172? What would happen if you tried to fly a Piper or Mooney? What if you wanted to fly a B737?
@OnTheGlideslope
7 жыл бұрын
I can configure it to fly any plane presuming I can find the gauges. I fly a C172, PA28-161, PA32, and Baron 58 already. With a 737 I can't get the windows to line up, but I can fly it.
@Jakodrums
7 жыл бұрын
awesome! wondering.. won't it disturb your eyes with the side screens?
@OnTheGlideslope
7 жыл бұрын
Nope. They look great.
@johnsealey3990
7 жыл бұрын
How are you getting the iPad to "talk" to flight sim? With the G1000 setup would it be possible to set up two iPads one for efis one for GPS map?
@OnTheGlideslope
7 жыл бұрын
The G1000 app in the Apple App store will run both on two iPads, though I don't use it. And the X-Plane talks to ForeFlight easily - you just enter the IP address of the tablet in its network screen.
@ItachiAlan777
7 жыл бұрын
can you give us this project? to download it in .PDF?
@gertjanvandermeij4265
7 жыл бұрын
What do you think ?
@SpeedSetSims
7 жыл бұрын
will you do flying around england? or just USA? my home airport is Rochester airport (EGTO)
Пікірлер: 241