its like being told what to do by a teacher. from what to do to why you do it that way. brilliant.
@thetoon50
9 ай бұрын
Excellent tutorial best I’ve seen clear and informative very well presented , thanks from a returning modeller after 40 odd years
@genessismodels
9 ай бұрын
Glad it helped
@bigalexg
3 жыл бұрын
Thanks Bobby. You really put together a professional guide from top to bottom! And your pleasant and no fuss personality makes it easy to watch and enjoy.
@thompson4900
3 жыл бұрын
Seriously. I should just put on “great British baking show” to have that mellow and pleasant British accent going on while I decal. So much more calm
@kev.j.goodwin8612
2 жыл бұрын
Used microset/sol method for the first time using your technique. Revell P47 with Tamiya paint finish. Tamiya gloss clear as the prep - all airbrushed. Really well pleased with the result, went exactly as described in the vid. Only needed a single application of sol to get a good painted on look.
@genessismodels
2 жыл бұрын
Nice work!
@charlescastell4638
Жыл бұрын
I've just a couple of weeks ago found your site, and what a gold mine of information. Thanks for your efforts to make the vids; they have been a tremendous help to me already. I'll be watching a lot!
@nickbutler7935
3 жыл бұрын
Some great close ups of the process. Keep up the great work.
@genessismodels
3 жыл бұрын
Thanks 👍
@wesleyhead3408
3 жыл бұрын
Great video sir! I only wish videos such as this had existed back when I was making models as a kid back in the 80's! FYI, Makeup sponges are also great for lightly pressing decals down and soaking up any access water/solution.
@genessismodels
3 жыл бұрын
Nice tip will try that next time
@paulhumphriesz4557
Жыл бұрын
thank you Bobby for this great video very informative and helpful for someone like me who has recently returned to modelling already have the Mr Hobby but will now get the micro sol as you suggested many thanks and had subscribed to your channel. 👍😎
@dadctf6243
3 жыл бұрын
Excellent, I’m always too impatient when applying decals, thanks for explaining the process I should follow 👍
@genessismodels
3 жыл бұрын
No problem 👍
@michaelatkins5927
3 жыл бұрын
Very helpful video on the process, clear and simple. Thanks! I'm always nervous at this stage of the model and this was awesome to watch.
@genessismodels
3 жыл бұрын
You're very welcome!
@graemebrumfitt6668
3 жыл бұрын
Hi, little tip for your Swan Morton blades, if you just use the tip! Run the back of the blade tip across a oil/wet stone that way you get a nice fresh cutting edge. TFS, G :)
@travis_thompson
3 жыл бұрын
You can get cheap USB powered cup warmers that can keep your water warm for longer decal sessions.
@roadsscholar4012
3 жыл бұрын
Excellent presentation. Very helpful.
@cottydry
2 жыл бұрын
Best decaling video I've seen. What do you do if you come back later and an edge of your decal has lifted up. (maybe from going around a tight curve) Will one of those solutions glue it back down or do you need something else. Is it easy to soak away too much of the decals adhesive? Would love to see a video on decaling problems/solutions.
@dah9093
Жыл бұрын
Great tutorial. I watch this (and your other one) every time I start decalling to remind myself how to do it properly. Current having issues with getting Kora decals to sink into the rivet holes on my 1/48 Éduard 109. Tried Set/Sol and the deadly Ammo Mig stuff. Any thoughts? Was thinking of pricking them all with a pin, but that’s a last resort. Thanks.
@guillermoyoseffi4977
2 жыл бұрын
Great video, as always! Cheers.
@genessismodels
2 жыл бұрын
Thanks again!
@Andrew-tz1cc
Жыл бұрын
Great tutorial, I've modelled for a year or so and still have issues with decals all the time. The finish on your airplane there looks great. Satin finish? I was wondering what specific varnish you like to use before starting decals. --Thanks
@genessismodels
Жыл бұрын
I do love to use this stuff now www.genessis-models.co.uk/product/mr-hobby-gx-112-gx-super-clear-iii-uv-cut-gloss-mr-color-18ml/
@Andrew-tz1cc
Жыл бұрын
@@genessismodels Ahh I've thought about trying that product. I'll give it go--Thanks!
@parman3942
5 ай бұрын
excellent video mate!
@genessismodels
4 ай бұрын
Glad you enjoyed it
@PlasticModelBuilder
3 жыл бұрын
I've found that sometimes the brand of decals makes them hard to move around, even with microscale.
@brandonmarsh3461
Жыл бұрын
first off, excellent tutorial. gave me enough confidence to actually try these solutions. second, micro set just beads up immediately and doesn’t spread like your video demonstrates. Is there some dilution needed? Also, the micro sol doesn’t wrinkle the decal either. I’ve taken all steps necessary to prep for these solutions with cleaning to clear coats, etc. what could I be doing wrong?
@theaussienurseflipper.8113
8 ай бұрын
Great vid mate. I heard U can use watered down vinegar as decal set. Cheers Graham
@genessismodels
8 ай бұрын
me too by not tried it
@petersmith2112
3 жыл бұрын
Good explanation, thanks very much Bob 👍
@genessismodels
3 жыл бұрын
Very welcome
@madcat1007
3 жыл бұрын
Nice video. Do you use same brush for Micro Set and Micro Sol?
@genessismodels
3 жыл бұрын
Yes I've had no problems from using the same brush mate
@raychen7161
Жыл бұрын
Hi Bobby, if I use Windsor and Newton Acrylic Gloss coat before and after decal, is it strong enough for Mirco Set/Sol? How about Mr Softner or Tamiya Mark Strong? Thanks!
@andy2991
Жыл бұрын
What do u use to wipe the excess decal solution off the paimt work as i noticed u carnt evan see any smudges or any marks were its been does it actually dry like that or does it make a mess if not cleaned up properly decal solution looks great it makes the decal look thinner and make it looks like its stook on the paintwork
@stevetheengineer
3 жыл бұрын
Just one question. Have the panel lines had a pin wash, or is that to follow and it’s pre shading? Very clear on the decaying, thanks
@genessismodels
3 жыл бұрын
you can find pin wash in my step by steps but there will be at tutorial on pin wash in the future
@stevetheengineer
3 жыл бұрын
@@genessismodels Sorry I wasn’t clear do yo decal then pin wash panel lines or do pin wash then decal?
@genessismodels
3 жыл бұрын
I pin wash after doing the decals mate
@stevetheengineer
3 жыл бұрын
@@genessismodels Thanks for getting back👍
@yaldayalda6090
11 ай бұрын
Can i use tamiya pannel line direct to model paint with acrylic tamiya and then wash it with x20a thinner?? Is it save or not, thanks
@JoeWarwick-d1c
6 ай бұрын
After applying mr hobby softer my decals are wrinkled, do i keep applying the softer ? Not sure what im doing wrong. How do i fix wrinkled decals
@moralsandvaluables8473
2 жыл бұрын
Dr. Dekyll and Mr. Hyde
@charlesyoung8600
2 жыл бұрын
Would these techniques apply to rc cars as well?
@genessismodels
2 жыл бұрын
It should
@chuckwensits-jb5bw
Жыл бұрын
How can I remove mr softer dried residue on gloss lacquer prior to gloss coating
@hansenhenry5438
3 жыл бұрын
For some reason I only got Micro Sol and not Micro Set, do yall think it could still be manageable? Thanks for the great video!
@genessismodels
3 жыл бұрын
Yes you can!
@hansenhenry5438
3 жыл бұрын
@@genessismodels So just replace it with a little water?
@genessismodels
3 жыл бұрын
Ye that should be fine. But still best to use set
@hansenhenry5438
3 жыл бұрын
@@genessismodels Gotcha, I'll have to try water I guess, thanks for the fast help!
@andreadefelici183
3 жыл бұрын
Thank you so much, really useful
@genessismodels
3 жыл бұрын
Glad to hear that!
@dandanita1692
3 жыл бұрын
what about gloss - decals- matt varnish ? or do i need that extra gloss before matt ?
@moralsandvaluables8473
2 жыл бұрын
Deckel ?
@franktozier3184
3 жыл бұрын
enjoyable video.
@genessismodels
3 жыл бұрын
Glad you enjoyed it
@garypic4083
8 ай бұрын
What's a dek-cal?
@giuseppebo8995
2 жыл бұрын
Molto interessante
@scalemodelhobby1677
3 жыл бұрын
Great vid dude thanks. 😀😀😀
@genessismodels
3 жыл бұрын
Any time!
@TheWGLOVER
3 жыл бұрын
Do you not have issues with the Microsoft making the Pledge go foggy?
@rochat
3 жыл бұрын
How long after you apply the pledge are you using microsol?
@rileyk99
3 жыл бұрын
I've noticed that it does happen occasionally but be patient and it'll go away.
@Rob-Slot
10 ай бұрын
'th' is not "f" (thing, not fing) Over use of the word "nice".
@marksullivan7766
5 ай бұрын
Canadians say decal, Americans say decal. 🍅🍅
@simonbradburn2375
3 жыл бұрын
Microsol you mean white vinegar and distilled water mixed. rip off.
Пікірлер: 72