Hi Jorgen, excellent and very helpful movie my friend thank you. I have a question, the resin you use in your movie and sold by Easycomposites is Xencast P6, your link for the resin takes me to Xencast P4 so which do you consider the better resin for casting lures P6 or P4? Richard.
@SplishSplashFishing
7 жыл бұрын
The big difference between the two is the "pottime" meaning the time you have to mix and stir, and in the end also the time before you can demold. The P6 gives you a fair amount of time to mix and stir, but also takes almost 1 hour before you can demold. With the P4 you have to be fairly quick (pottime = 4 min. My expeerience more like 2-3 min) but it also lets you demold in about 20 min. So if you are used to resin and want the get some lures casted in short time, go for P4. If you are new to resin, start with P6 and live with the longer production time.
@2kbluedragon
5 жыл бұрын
one of the most under rated lure makers on youtube should have way more subs
@SplishSplashFishing
5 жыл бұрын
Thanks a lot Paul. I am doing my best and along the way I will probably get the numbers I desserve. Until the the rest of you can just enjoy :D
@jhnnyboy100
Жыл бұрын
Excellent movie brother!
@jonathanrittmeier4933
3 жыл бұрын
Great Videos, i build my oen lures for a few years now, but i got nice new ideas in your Videos. Greatings from Gernany
@SuperKabookie
7 жыл бұрын
Love watching you work your magic!
@flurkmotard1
7 жыл бұрын
Thanks for sharing this great movie with us Like to see more of those...
@richardlewis7214
7 жыл бұрын
Many thanks for your informative reply Jorgen.
@Just_Enni
7 жыл бұрын
An other great Splish Splash Movie!
@Arfabiscuit
7 жыл бұрын
Lovely work again Mr Splash really enjoy watching your innovative techniques bravo .
@SplishSplashFishing
7 жыл бұрын
Thanks mate
@Toddy00001
7 жыл бұрын
Inspiring stuff, thank you so much for the info.
@vincentiustrisandhi4110
3 жыл бұрын
Hi, nice explenation about resin material. can you help me about making resin lure, First i cannot find microballon in my country (no body sell it in here) what kind other material can use for make resin little bit bouyant, i try find alternative. If i mix wood powder can make the resin slightly more bouyant?
@topbananaprofit2238
6 жыл бұрын
awsome!!! so much info and great tips and ideas you giving in here. i want to try making me own jerks and gummifish now :)
@SplishSplashFishing
6 жыл бұрын
You should do so - It's really funny, and a fantastic extra dimension to fishing. Good luck
@bombjack4958
Жыл бұрын
Very helpfull
@bombjack4958
Жыл бұрын
Everything's was said nothingleft out everything In description best vid so far
@SplishSplashFishing
Жыл бұрын
Thanks - Just as it was meant to be. Easy for every level of luremakers
@komkamkia
3 жыл бұрын
Hi there... i plan to start to learn to cast resin lure and i have 1 noobs question that is how do i know how much resin do i need? Example i plan to cast a popper length is 160mm and diameter is around 45mm and i would like the popper finalize weight at 100gram. So how much resin do I need?
@SplishSplashFishing
3 жыл бұрын
Hard to say as it depends on many things. I assume that it should be floating, so you will need to add glassbubbles, and you also need some weights to ensure the right movement. How much of both depends on shape and desired movement. In the end you will propably end up using somewhere between 70-90 g resin per popper
@thaniyahoo
4 жыл бұрын
Beautiful wok Jorgen
@Marichepesca
Жыл бұрын
Saludos. Dónde puedo conseguir esa resina de poliuretano
@andreymarar204
3 жыл бұрын
Добрый день. Подскажите пожалуйста про этот пластик. Он же плавающий.
@xyncyllx4200
2 жыл бұрын
Hii ! I came across your youtube & ive liked & subscribe to you. Im wondering. Did u already make the thermal foaming video yet? For the plastic cover of the resin lure
@xyncyllx4200
2 жыл бұрын
Thermoforming * tutorial i mean..
@jorgenharreby
2 жыл бұрын
Yes, you can find it here: kzitem.info/news/bejne/r2ewtoSXp6OUeZg
@user-bm3ei3tr7i
7 жыл бұрын
very good
@joshjohnson317
3 жыл бұрын
What is the best type of risen to use for making lures?
@waiyanyeyint4326
3 жыл бұрын
Hi Jorgen ,i have a question. What grade of 3M glass bubbles are using for this? Pls....
@SplishSplashFishing
3 жыл бұрын
Sorry - I havn't tried that product, so I wouldn't know what grade to use. You can by a grade in the middle, and just adjust the amount to get the right boyancy I guess. Good luck
@waiyanyeyint4326
3 жыл бұрын
@@SplishSplashFishing Okay. Thank for your advice.Have a nice day.
@dombosco100
3 жыл бұрын
Amazing your work, congratulations. It's really nice to see your videos. A doubt! Are this "Glass bubble" micro glass spheres? And is there any specific size you use? Once again, your videos are mesmerizing.
@petrkulkus4184
3 жыл бұрын
Good day. Thank you for the beautiful and educational videos. So far, I only create wobblers with balsa, but after watching your videos, I would also like to try casting. I don't speak much English and that's why I'm not sure if I understood everything correctly. I wonder in what proportion you add those balls to the resin? 10% (by weight or volume) of component "A" or of the entire volume of resin? Thank you for answer.
@SplishSplashFishing
3 жыл бұрын
For most of my lures I use 10% of total weight, but I also make lures with 5 and 15% of total weight. Depends on the lure
@xgenux
3 жыл бұрын
Probably a dumb question but how do you remove the funnel part of the lure when you remove it from the mold? Just curious the best route at doing so without damaging the actual lure..thanks. great channel
@SplishSplashFishing
3 жыл бұрын
Just cut i of with a saw, use a boxcutter to trim, and then sand to a smooth surface
@nemanjabukvic6655
7 жыл бұрын
is the silicone for the mold the same one which you used for making a mold for softbait?
@SplishSplashFishing
7 жыл бұрын
Yes it's the same. You can use it for anything that isn't more hot than about 180 degrees celsius
@erteezorro9070
7 жыл бұрын
thanks for your video sir but in my country i'm can't find the material like you've
@axelt2222
7 жыл бұрын
Were do you buy all thes stuff god inspiration
@SplishSplashFishing
7 жыл бұрын
Hi Alex. There is a few links i the text bellow the video to the most common materials
@j1987mortensen
7 жыл бұрын
Hej Jørgen, hvor køber du de forskellige værktøjer, så som ler og sådan?? Er kommet til dine videoer ved at følge Thomas graversen, og er blevet kæmpe fan af dig, vil bare gerne finde ud af hvordan jeg kommer igang. Tak for masser af god underholdning og læring.
@SplishSplashFishing
7 жыл бұрын
Jamen det kommer fra alle mulige steder. Modellervoks og sculpey kommer fra graficial.dk. Værktøjer til at forme med kommer vist fra aliexpress.com - Kan godt prøve at finde et link, hvis det har interesse. Fedt du er blevet inspireret til at komme i gang - Det er en fed hobby og fed ny dimention til dit fiskeri
@jimheffron6813
4 жыл бұрын
Outstanding info----- I have a question about that metal netting you used--- Where or what is that from or available ?? Thanks
@SplishSplashFishing
4 жыл бұрын
Thanks Jim - Its called expanded metal plate, and I think it is available in most countries - I got mine in a local store
@jonas8862
7 жыл бұрын
Hi! i was wondering how your epoxy drying wheel looks like! never seen a solution on lures with readymade "hooks eyes" like your Resin Jerks
@SplishSplashFishing
7 жыл бұрын
Hi Jonas. If you follow this link you can see my setup. kzitem.info/news/bejne/12Zoyax4p4mTomUm58s The pencillures are mounted a bit different, but there is some jerks hanging above them. The jerk are just linked together using plastic cable straps or a piece of wire. This setup also makes you able to let them rotate while you coat them
@anchovyal3606
2 жыл бұрын
Do you sell any of your molds I would like to buy some
@SplishSplashFishing
2 жыл бұрын
I don't sell my molds, but I do sell e few lures now and then
@ricklomas112
6 жыл бұрын
Awesome vids mate very informative and cool lures. How did you make the plastic stencils man.....was it a suck plastic type machine. Then just cut out the shapes you want in the plastic stencil mould.
@SplishSplashFishing
6 жыл бұрын
Hi Rick - Yes they are made by thermoforming plastic to fit the lure. You can see more about that in this movie: kzitem.info/news/bejne/r2ewtoSXp6OUeZg
@budtaz11
5 жыл бұрын
hi.... where can i find scale 18:48
@aspergerhellasbn
7 жыл бұрын
Hello,first i would like you to tell me your name so i can prefer you.My name is nikos.After searching on internet about lures i found that some companies (rapala) for fish eyes uses fiber optic eye.I think it is great idea and attrackts fish more .What's your opinion ?have you heard about this?
@SplishSplashFishing
7 жыл бұрын
Hi Nikos. My name i Jørgen (or Jorgen outside Denmark). Many luremakers are using very fanzy eyes, but in my opinion its a bit of overkill, as I think that fish rarely has time to study the lure carefully. They react on instinct and the general appearance of a prey. Sometimes they need to be provoked and other times the lure should be as close to their favorite prey as possible. When we make super fanzy lures, we catch the fisherman, and by doing that we ensure that the lure gets time in the water, thus in the end makes i catch more fish. This is a bit simplyfied, but nore or less how i think i works.
@aspergerhellasbn
7 жыл бұрын
Splish Splash yes i agree with you the way fish reacts.I must add my opinion ,before fish bites the lure usually examine it .So my first thought was to make lure as much realistic you can.But there comes some big companies(as i saw you too) which make lures with fancie colours yellow pink etc colours to attract them.The main point when making this lures is to be more visible? Or it has to do weather conditions and depth?
@kevinjavier8430
6 жыл бұрын
Is there a certain kind of paint u need to use
@SplishSplashFishing
6 жыл бұрын
No it is standard acryllic airbrush colors like Createx, Auto Air, Vallejo and the like
@williamstorey5024
4 жыл бұрын
Does this resin float?
@SplishSplashFishing
4 жыл бұрын
You add Glass Bubbles /Microbaloons to get the requested boyancy - Most of my lure are made with a floating mix, and then I add weights to get the wanted boyancy
@taralaidley3312
7 жыл бұрын
Wow what kind of bait is that little fat thing?
@SplishSplashFishing
7 жыл бұрын
Well - Actually it isn't a bait. It's a floating keyhanger for a boat key. You can check out the finished version here: facebook.com/splishsplashfishing/videos/1327986893918666/
@taralaidley3312
7 жыл бұрын
Splish Splash That is awesome man!
@claypoole90
7 жыл бұрын
Splish Splash you should turn it into a lipless crank bait and put a harness in here and rattles.
@SplishSplashFishing
7 жыл бұрын
I dont know how it would turn out, but it could be funny to try
@claypoole90
7 жыл бұрын
If you make it and it works paint it a blue gill color and I will buy it from you
@thhovmand
7 жыл бұрын
Hej og tak for endnu en go film, kommer der ikke en lille film med tips og tricks for hvordan du bukker den rustfrie tråd, jeg synes det kan være lidt besværlig at få et pænt rundt buk..og go jul
@SplishSplashFishing
7 жыл бұрын
Ja det kan godt være lidt tricky - Ved heller ikke om jeg selv er specielt god til det, men hvis du kigger på nogle af mine ældre film om "The Jerk" kan du se hvordan man gør det. Det er en rigtig god ide at få lavet en bukke-rig på et bræt eller lignende. På et tidspunkt kommer der måske også en basic luremaking film om dette, men den er ikke med i planerne endnu
@b4mudman833
7 жыл бұрын
Could you spend a little more time talking about glass bubbles. Such as the physics or properties of the resin material and the glass bubbles, amount used and places where you can get it online.
@SplishSplashFishing
7 жыл бұрын
b4mudman check the text bellow the movie for links to materials. Many of the informations you seek you can find at the producers site
@BenjaminsAxolotls
7 жыл бұрын
Dont know what you think of this but I though this could be a good technique to try when making hard plastic moulds as it would be cheaper than casting silicone and more malleable, but anyway heres the link to Grant Thompson's video on it kzitem.info/news/bejne/mJyt36h3bqRjgKw
@SplishSplashFishing
7 жыл бұрын
I have tested this technique before, but didnt have a lot of succes with it. This guy however makes it look easy, so I might give i a try more. Thanks for the link
@mindovamattah
6 жыл бұрын
Love the vids but can you speak up louder[my phone is on max& your still low speaking] and speed up the process. Thanks in advance
@SplishSplashFishing
6 жыл бұрын
Still working on improving the sound - Hopefully it will be solved once I get my new "studio".
Пікірлер: 76